From: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
To: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: linux ARM
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
Subject: [PATCH 5/5] ARM: Kirkwood: t5325: Use simple-card to instantiate audio
Date: Thu, 17 Apr 2014 17:53:14 +0200 [thread overview]
Message-ID: <1397749994-24983-6-git-send-email-andrew@lunn.ch> (raw)
In-Reply-To: <1397749994-24983-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
Add device tree nodes to instantiate the audio drivers on the HP T5325
device. Remove platform driver instantiating of the audio, which
results in board-t5325.c being removed.
Signed-off-by: Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
---
arch/arm/boot/dts/kirkwood-t5325.dts | 25 +++++++++++++++++++++++++
arch/arm/mach-mvebu/board-t5325.c | 26 --------------------------
arch/arm/mach-mvebu/board.h | 6 ------
arch/arm/mach-mvebu/kirkwood.c | 3 ---
4 files changed, 25 insertions(+), 35 deletions(-)
delete mode 100644 arch/arm/mach-mvebu/board-t5325.c
diff --git a/arch/arm/boot/dts/kirkwood-t5325.dts b/arch/arm/boot/dts/kirkwood-t5325.dts
index dbb730642543..2cf3fe38404d 100644
--- a/arch/arm/boot/dts/kirkwood-t5325.dts
+++ b/arch/arm/boot/dts/kirkwood-t5325.dts
@@ -192,6 +192,31 @@
gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
};
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,routing =
+ "Headphone Jack", "HPL",
+ "Headphone Jack", "HPR",
+ "Speaker", "SPKOUT",
+ "Speaker", "SPKOUTN",
+ "MIC1", "Mic Jack",
+ "MIC2", "Mic Jack";
+ simple-audio-card,widgets =
+ "Headphone", "Headphone Jack",
+ "Speaker", "Speaker",
+ "Microphone", "Mic Jack";
+
+ simple-audio-card,mclk-factor = <256>;
+
+ simple-audio-card,cpu {
+ sound-dai = <&audio>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&alc5621>;
+ };
+ };
};
&mdio {
diff --git a/arch/arm/mach-mvebu/board-t5325.c b/arch/arm/mach-mvebu/board-t5325.c
deleted file mode 100644
index f2401b298218..000000000000
--- a/arch/arm/mach-mvebu/board-t5325.c
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * HP T5325 Board Setup
- *
- * Copyright (C) 2014
- *
- * Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include "board.h"
-
-static struct platform_device hp_t5325_audio_device = {
- .name = "t5325-audio",
- .id = -1,
-};
-
-void __init t5325_init(void)
-{
- platform_device_register(&hp_t5325_audio_device);
-}
diff --git a/arch/arm/mach-mvebu/board.h b/arch/arm/mach-mvebu/board.h
index de7f0a191394..9c7bb4386f8b 100644
--- a/arch/arm/mach-mvebu/board.h
+++ b/arch/arm/mach-mvebu/board.h
@@ -13,10 +13,4 @@
#ifndef __ARCH_MVEBU_BOARD_H
#define __ARCH_MVEBU_BOARD_H
-#ifdef CONFIG_MACH_T5325
-void t5325_init(void);
-#else
-static inline void t5325_init(void) {};
-#endif
-
#endif
diff --git a/arch/arm/mach-mvebu/kirkwood.c b/arch/arm/mach-mvebu/kirkwood.c
index 120207fc36f1..c30bc316f40d 100644
--- a/arch/arm/mach-mvebu/kirkwood.c
+++ b/arch/arm/mach-mvebu/kirkwood.c
@@ -180,9 +180,6 @@ static void __init kirkwood_dt_init(void)
kirkwood_pm_init();
kirkwood_dt_eth_fixup();
- if (of_machine_is_compatible("hp,t5325"))
- t5325_init();
-
of_platform_populate(NULL, of_default_bus_match_table, auxdata, NULL);
}
--
1.9.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-04-17 15:53 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-17 15:53 [PATCH 0/5] Simple-audio-card support for HP t5325 Andrew Lunn
[not found] ` <1397749994-24983-1-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-17 15:53 ` [PATCH 1/5] ASoC: alc5623: Add device tree binding Andrew Lunn
2014-04-18 16:33 ` Mark Brown
[not found] ` <20140418163351.GI12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-04-18 18:17 ` Andrew Lunn
[not found] ` <20140418181735.GB32580-g2DYL2Zd6BY@public.gmane.org>
2014-04-18 18:44 ` Mark Brown
2014-04-28 7:01 ` Anil Kumar
2014-04-17 15:53 ` [PATCH 2/5] ARM: Kirkwood: Use DT to instansiate codec Andrew Lunn
[not found] ` <1397749994-24983-3-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-17 21:37 ` Jason Cooper
2014-04-17 15:53 ` [PATCH 3/5] ARM: Kirkwood: DT: Add missing #sound-dai-cells property Andrew Lunn
2014-04-17 15:53 ` [PATCH 4/5] ASoC: simple-card: Support setting mclk via a fixed factor Andrew Lunn
[not found] ` <1397749994-24983-5-git-send-email-andrew-g2DYL2Zd6BY@public.gmane.org>
2014-04-18 16:38 ` Mark Brown
2014-04-17 15:53 ` Andrew Lunn [this message]
2014-04-18 0:15 ` [PATCH 0/5] Simple-audio-card support for HP t5325 Jason Cooper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397749994-24983-6-git-send-email-andrew@lunn.ch \
--to=andrew-g2dyl2zd6by@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).