From: Rajendra Nayak <rnayak@ti.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
devicetree@vger.kernel.org
Cc: tony@atomide.com, bcousson@baylibre.com, nm@ti.com,
Rajendra Nayak <rnayak@ti.com>
Subject: [PATCH v2 3/4] ARM: OMAP2+: Add machine entry for dra72x devices
Date: Wed, 23 Apr 2014 14:32:54 +0530 [thread overview]
Message-ID: <1398243775-4145-4-git-send-email-rnayak@ti.com> (raw)
In-Reply-To: <1398243775-4145-1-git-send-email-rnayak@ti.com>
The only difference from the dra74x devices is the missing .smp entry.
While at it, also fix the use of __initdata (across the file) and replace them
with __initconst as reported by checkpatch
ERROR: Use of const init definition must use __initconst
+static const char *dra72x_boards_compat[] __initdata = {
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/board-generic.c | 46 +++++++++++++++++++++++++----------
1 file changed, 33 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index b8920b6..4d1222d 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -43,7 +43,7 @@ static void __init omap_generic_init(void)
}
#ifdef CONFIG_SOC_OMAP2420
-static const char *omap242x_boards_compat[] __initdata = {
+static const char *omap242x_boards_compat[] __initconst = {
"ti,omap2420",
NULL,
};
@@ -62,7 +62,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_OMAP2430
-static const char *omap243x_boards_compat[] __initdata = {
+static const char *omap243x_boards_compat[] __initconst = {
"ti,omap2430",
NULL,
};
@@ -81,7 +81,7 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP3
-static const char *omap3_boards_compat[] __initdata = {
+static const char *omap3_boards_compat[] __initconst = {
"ti,omap3430",
"ti,omap3",
NULL,
@@ -100,7 +100,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *omap36xx_boards_compat[] __initdata = {
+static const char *omap36xx_boards_compat[] __initconst = {
"ti,omap36xx",
NULL,
};
@@ -118,7 +118,7 @@ DT_MACHINE_START(OMAP36XX_DT, "Generic OMAP36xx (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *omap3_gp_boards_compat[] __initdata = {
+static const char *omap3_gp_boards_compat[] __initconst = {
"ti,omap3-beagle",
"timll,omap3-devkit8000",
NULL,
@@ -137,7 +137,7 @@ DT_MACHINE_START(OMAP3_GP_DT, "Generic OMAP3-GP (Flattened Device Tree)")
.restart = omap3xxx_restart,
MACHINE_END
-static const char *am3517_boards_compat[] __initdata = {
+static const char *am3517_boards_compat[] __initconst = {
"ti,am3517",
NULL,
};
@@ -157,7 +157,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_AM33XX
-static const char *am33xx_boards_compat[] __initdata = {
+static const char *am33xx_boards_compat[] __initconst = {
"ti,am33xx",
NULL,
};
@@ -177,7 +177,7 @@ MACHINE_END
#endif
#ifdef CONFIG_ARCH_OMAP4
-static const char *omap4_boards_compat[] __initdata = {
+static const char *omap4_boards_compat[] __initconst = {
"ti,omap4460",
"ti,omap4430",
"ti,omap4",
@@ -199,7 +199,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_OMAP5
-static const char *omap5_boards_compat[] __initdata = {
+static const char *omap5_boards_compat[] __initconst = {
"ti,omap5432",
"ti,omap5430",
"ti,omap5",
@@ -221,7 +221,7 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_AM43XX
-static const char *am43_boards_compat[] __initdata = {
+static const char *am43_boards_compat[] __initconst = {
"ti,am4372",
"ti,am43",
NULL,
@@ -240,13 +240,14 @@ MACHINE_END
#endif
#ifdef CONFIG_SOC_DRA7XX
-static const char *dra7xx_boards_compat[] __initdata = {
+static const char *dra74x_boards_compat[] __initconst = {
+ "ti,dra74x",
"ti,dra7xx",
"ti,dra7",
NULL,
};
-DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
+DT_MACHINE_START(DRA74X_DT, "Generic DRA74X (Flattened Device Tree)")
.reserve = omap_reserve,
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
@@ -255,7 +256,26 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA7XX (Flattened Device Tree)")
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_time = omap5_realtime_timer_init,
- .dt_compat = dra7xx_boards_compat,
+ .dt_compat = dra74x_boards_compat,
+ .restart = omap44xx_restart,
+MACHINE_END
+
+static const char *dra72x_boards_compat[] __initconst = {
+ "ti,dra72x",
+ "ti,dra7xx",
+ "ti,dra7",
+ NULL,
+};
+
+DT_MACHINE_START(DRA72_DT, "Generic DRA72X (Flattened Device Tree)")
+ .reserve = omap_reserve,
+ .map_io = omap5_map_io,
+ .init_early = dra7xx_init_early,
+ .init_late = dra7xx_init_late,
+ .init_irq = omap_gic_of_init,
+ .init_machine = omap_generic_init,
+ .init_time = omap5_realtime_timer_init,
+ .dt_compat = dra72x_boards_compat,
.restart = omap44xx_restart,
MACHINE_END
#endif
--
1.7.9.5
next prev parent reply other threads:[~2014-04-23 9:02 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-23 9:02 [PATCH v2 0/4] ARM: DRA7: Add support for DRA72x devices Rajendra Nayak
2014-04-23 9:02 ` [PATCH v2 1/4] ARM: dts: dra7-evm: Remove the wrong and undocumented compatible Rajendra Nayak
2014-04-23 9:02 ` [PATCH v2 2/4] ARM: dts: Add support for DRA72x family of devices Rajendra Nayak
2014-04-23 9:02 ` Rajendra Nayak [this message]
2014-04-23 9:51 ` [PATCH v2 3/4] ARM: OMAP2+: Add machine entry for dra72x devices Arnd Bergmann
2014-04-23 11:13 ` Rajendra Nayak
2014-04-23 9:02 ` [PATCH v2 4/4] ARM: DRA7: Add support for soc_is_dra74x() and soc_is_dra72x() varients Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398243775-4145-4-git-send-email-rnayak@ti.com \
--to=rnayak@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).