[PATCHv2 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[PATCHv2 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[tthayer]

From: Thor Thayer <tthayer@altera.com>

Addition of the Altera SDRAM controller bindings and device
tree changes to the Altera SoC project.

---
v2: Update the mailing list to include the EDAC mailing list.

Signed-off-by: Thor Thayer <tthayer@altera.com>
To: Rob Herring <robherring2@gmail.com>
To: Pawel Moll <pawel.moll@arm.com>
To: Mark Rutland <mark.rutland@arm.com>
To: Ian Campbell <ijc+devicetree@hellion.org.uk>
To: Kumar Gala <galak@codeaurora.org>
To: Rob Landley <rob@landley.net>
To: Russell King <linux@arm.linux.org.uk>
To: Dinh Nguyen <dinguyen@altera.com>
To: Doug Thompson <dougthompson@xmission.com>
To: Grant Likely <grant.likely@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: devicetree@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
 .../bindings/arm/altera/socfpga-sdram.txt          |   14 ++++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
 2 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
new file mode 100644
index 0000000..525cb76
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
@@ -0,0 +1,14 @@
+Altera SOCFPGA SDRAM Controller
+
+Required properties:
+- compatible : "altr,sdr-ctl", "syscon";
+                Note that syscon is invoked for this device to support the FPGA
+		bridge driver, EDAC driver and other devices that share the
+		registers.
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+	sdrctl@ffc25000 {
+		compatible = "altr,sdr-ctl", "syscon";
+		reg = <0xffc25000 0x1000>;
+	};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index df43702..6ce912e 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -676,6 +676,11 @@
 			clocks = <&l4_sp_clk>;
 		};
 
+		sdrctl@ffc25000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
 		rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
-- 
1.7.9.5

[PATCHv2 2/3] dts: socfpga: Add bindings for Altera SoC SDRAM EDAC

[tthayer]

From: Thor Thayer <tthayer@altera.com>

Addition of the Altera SDRAM EDAC bindings and device
tree changes to the Altera SoC project.

---
v2: Update the mailing list to include the EDAC mailing list.

Signed-off-by: Thor Thayer <tthayer@altera.com>
To: Rob Herring <robherring2@gmail.com>
To: Pawel Moll <pawel.moll@arm.com>
To: Mark Rutland <mark.rutland@arm.com>
To: Ian Campbell <ijc+devicetree@hellion.org.uk>
To: Kumar Gala <galak@codeaurora.org>
To: Rob Landley <rob@landley.net>
To: Russell King <linux@arm.linux.org.uk>
To: Dinh Nguyen <dinguyen@altera.com>
To: Doug Thompson <dougthompson@xmission.com>
To: Grant Likely <grant.likely@linaro.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: devicetree@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
---
 .../bindings/arm/altera/socfpga-sdram-edac.txt     |   12 ++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
 2 files changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
new file mode 100644
index 0000000..9348c53
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,12 @@
+Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
+
+Required properties:
+- compatible : should contain "altr,sdr-edac";
+- interrupts : Should contain the SDRAM ECC IRQ in the
+	appropriate format for the IRQ controller.
+
+Example:
+	sdramedac@0 {
+		compatible = "altr,sdram-edac";
+		interrupts = <0 39 4>;
+	};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6ce912e..a0ea69b 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -681,6 +681,11 @@
 			reg = <0xffc25000 0x1000>;
 		};
 
+		sdramedac@0 {
+			compatible = "altr,sdram-edac";
+			interrupts = <0 39 4>;
+		};
+
 		rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
-- 
1.7.9.5

[PATCHv2 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[tthayer]

From: Thor Thayer <tthayer@altera.com>

Added EDAC support for reporting ECC errors of CycloneV
and ArriaV SDRAM controller.
- The SDRAM Controller registers are used by the FPGA bridge so
  these are accessed through the syscon interface.
- The configuration of the SDRAM memory size for the EDAC framework
  is discovered from the SDRAM Controller registers.
- Documentation of the bindings in devicetree/bindings/arm/altera/
  socfpga-sdram-edac.txt
- Correction of single bit errors, detection of double bit errors.

---
v2: Use the SDRAM controller registers to calculate memory size
    instead of the Device Tree. Update To & Cc list. Add maintainer 
    information.

Signed-off-by: Thor Thayer <tthayer@altera.com>
To: Rob Herring <robherring2@gmail.com>
To: Doug Thompson <dougthompson@xmission.com>
To: Grant Likely <grant.likely@linaro.org>
To: Pawel Moll <pawel.moll@arm.com>
To: Mark Rutland <mark.rutland@arm.com>
To: Ian Campbell <ijc+devicetree@hellion.org.uk>
To: Kumar Gala <galak@codeaurora.org>
To: Rob Landley <rob@landley.net>
To: Russell King <linux@arm.linux.org.uk>
To: Dinh Nguyen <dinguyen@altera.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: devicetree@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
---
 MAINTAINERS                   |    5 +
 drivers/edac/Kconfig          |    9 +
 drivers/edac/Makefile         |    2 +
 drivers/edac/altera_mc_edac.c |  393 +++++++++++++++++++++++++++++++++++++++++
 4 files changed, 409 insertions(+)
 create mode 100644 drivers/edac/altera_mc_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index b8af16d..aee0746 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1249,6 +1249,11 @@ M:	Dinh Nguyen <dinguyen@altera.com>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA SDRAM EDAC SUPPORT
+M:	Thor Thayer <tthayer@altera.com>
+S:	Maintained
+F:	drivers/edac/altera_mc_edac.c
+
 ARM/STI ARCHITECTURE
 M:	Srinivas Kandagatla <srinivas.kandagatla@st.com>
 M:	Stuart Menefy <stuart.menefy@st.com>
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 878f090..4f4d379 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
+config EDAC_ALTERA_MC
+	bool "Altera SDRAM Memory Controller EDAC"
+	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+	help
+	  Support for error detection and correction on the
+	  Altera SDRAM memory controller. Note that the
+	  preloader must initialize the SDRAM before loading
+	  the kernel.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 4154ed6..e15d05f 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
 obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
 obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
 obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
+
+obj-$(CONFIG_EDAC_ALTERA_MC)	        += altera_mc_edac.o
diff --git a/drivers/edac/altera_mc_edac.c b/drivers/edac/altera_mc_edac.c
new file mode 100644
index 0000000..811b712
--- /dev/null
+++ b/drivers/edac/altera_mc_edac.c
@@ -0,0 +1,393 @@
+/*
+ *  Copyright Altera Corporation (C) 2014. All rights reserved.
+ *  Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Adapted from the highbank_mc_edac driver
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define ALTR_EDAC_MOD_STR	"altera_edac"
+
+/* SDRAM Controller CtrlCfg Register */
+#define ALTR_SDR_CTLCFG			0x00
+
+/* SDRAM Controller CtrlCfg Register Bit Masks */
+#define ALTR_SDR_CTLCFG_ECC_EN		0x400
+#define ALTR_SDR_CTLCFG_ECC_CORR_EN	0x800
+#define ALTR_SDR_CTLCFG_GEN_SB_ERR	0x2000
+#define ALTR_SDR_CTLCFG_GEN_DB_ERR	0x4000
+
+#define ALTR_SDR_CTLCFG_ECC_AUTO_EN	(ALTR_SDR_CTLCFG_ECC_EN | \
+					ALTR_SDR_CTLCFG_ECC_CORR_EN)
+
+/* SDRAM Controller Address Width Register */
+#define ALTR_SDR_DRAMADDRW		0x2C
+
+/* SDRAM Controller Address Widths Field Register */
+#define ALTR_SDR_DRAMADDRW_COLBIT_MASK	0x001F
+#define ALTR_SDR_DRAMADDRW_COLBIT_LSB	0
+#define ALTR_SDR_DRAMADDRW_ROWBIT_MASK	0x03E0
+#define ALTR_SDR_DRAMADDRW_ROWBIT_LSB	5
+#define ALTR_SDR_DRAMADDRW_BANKBIT_MASK	0x1C00
+#define ALTR_SDR_DRAMADDRW_BANKBIT_LSB	10
+#define ALTR_SDR_DRAMADDRW_CSBIT_MASK	0xE000
+#define ALTR_SDR_DRAMADDRW_CSBIT_LSB	13
+
+/* SDRAM Controller Interface Data Width Register */
+#define ALTR_SDR_DRAMIFWIDTH		0x30
+
+/* SDRAM Controller Interface Data Width Defines */
+#define ALTR_SDR_DRAMIFWIDTH_16B_ECC	24
+#define ALTR_SDR_DRAMIFWIDTH_32B_ECC	40
+
+/* SDRAM Controller DRAM Status Register */
+#define ALTR_SDR_DRAMSTS		0x38
+
+/* SDRAM Controller DRAM Status Register Bit Masks */
+#define ALTR_SDR_DRAMSTS_SBEERR		0x04
+#define ALTR_SDR_DRAMSTS_DBEERR		0x08
+#define ALTR_SDR_DRAMSTS_CORR_DROP	0x10
+
+/* SDRAM Controller DRAM IRQ Register */
+#define ALTR_SDR_DRAMINTR		0x3C
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define ALTR_SDR_DRAMINTR_INTREN	0x01
+#define ALTR_SDR_DRAMINTR_SBEMASK	0x02
+#define ALTR_SDR_DRAMINTR_DBEMASK	0x04
+#define ALTR_SDR_DRAMINTR_CORRDROPMASK	0x08
+#define ALTR_SDR_DRAMINTR_INTRCLR	0x10
+
+/* SDRAM Controller Single Bit Error Count Register */
+#define ALTR_SDR_SBECOUNT		0x40
+
+/* SDRAM Controller Single Bit Error Count Register Bit Masks */
+#define ALTR_SDR_SBECOUNT_MASK		0x0F
+
+/* SDRAM Controller Double Bit Error Count Register */
+#define ALTR_SDR_DBECOUNT		0x44
+
+/* SDRAM Controller Double Bit Error Count Register Bit Masks */
+#define ALTR_SDR_DBECOUNT_MASK		0x0F
+
+/* SDRAM Controller ECC Error Address Register */
+#define ALTR_SDR_ERRADDR		0x48
+
+/* SDRAM Controller ECC Error Address Register Bit Masks */
+#define ALTR_SDR_ERRADDR_MASK		0xFFFFFFFF
+
+/* SDRAM Controller ECC Autocorrect Drop Count Register */
+#define ALTR_SDR_DROPCOUNT		0x4C
+
+/* SDRAM Controller ECC Autocorrect Drop Count Register Bit Masks */
+#define ALTR_SDR_DROPCOUNT_MASK		0x0F
+
+/* SDRAM Controller ECC AutoCorrect Address Register */
+#define ALTR_SDR_DROPADDR		0x50
+
+/* SDRAM Controller ECC AutoCorrect Error Address Register Bit Masks */
+#define ALTR_SDR_DROPADDR_MASK		0xFFFFFFFF
+
+/* Altera SDRAM Memory Controller data */
+struct altr_sdram_mc_data {
+	struct regmap *mc_vbase;
+};
+
+static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	u32 status = 0, err_count = 0, err_addr = 0;
+
+	/* Error Address is shared by both SBE & DBE */
+	regmap_read(drvdata->mc_vbase, ALTR_SDR_ERRADDR, &err_addr);
+
+	regmap_read(drvdata->mc_vbase, ALTR_SDR_DRAMSTS, &status);
+
+	if (status & ALTR_SDR_DRAMSTS_DBEERR) {
+		regmap_read(drvdata->mc_vbase, ALTR_SDR_DBECOUNT, &err_count);
+		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
+		      err_count, err_addr);
+	}
+	if (status & ALTR_SDR_DRAMSTS_SBEERR) {
+		regmap_read(drvdata->mc_vbase, ALTR_SDR_SBECOUNT, &err_count);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1, mci->ctl_name, "");
+	}
+
+	regmap_write(drvdata->mc_vbase,	ALTR_SDR_DRAMINTR,
+		     (ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
+					const char __user *data,
+					size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	u32 *ptemp;
+	dma_addr_t dma_handle;
+	u32 reg, read_reg = 0;
+
+	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
+	if (IS_ERR(ptemp)) {
+		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+		dev_err(mci->pdev, "**EDAC Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
+	read_reg &= ~(ALTR_SDR_CTLCFG_GEN_SB_ERR | ALTR_SDR_CTLCFG_GEN_DB_ERR);
+
+	if (count == 3) {
+		dev_alert(mci->pdev, "** EDAC Inject Double bit error\n");
+		regmap_write(drvdata->mc_vbase, ALTR_SDR_CTLCFG,
+			     (read_reg | ALTR_SDR_CTLCFG_GEN_DB_ERR));
+	} else {
+		dev_alert(mci->pdev, "** EDAC Inject Single bit error\n");
+		regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG,
+			     (read_reg | ALTR_SDR_CTLCFG_GEN_SB_ERR));
+	}
+
+	ptemp[0] = 0x5A5A5A5A;
+	ptemp[1] = 0xA5A5A5A5;
+	regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG, read_reg);
+	/* Ensure it has been written out */
+	wmb();
+
+	reg = ptemp[0];
+	read_reg = ptemp[1];
+
+	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+
+	return count;
+}
+
+static const struct file_operations altr_sdr_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = altr_sdr_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	if (mci->debugfs)
+		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
+				    &altr_sdr_mc_debug_inject_fops);
+}
+#else
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{}
+#endif
+
+/* Get total memory size in bytes */
+static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
+{
+	u32 size;
+	u32 read_reg, row, bank, col, cs, width;
+	u32 retcode;
+
+	retcode = regmap_read(mc_vbase, ALTR_SDR_DRAMADDRW, &read_reg);
+	if (retcode < 0)
+		return 0;
+
+	col = (read_reg & ALTR_SDR_DRAMADDRW_COLBIT_MASK) >>
+		ALTR_SDR_DRAMADDRW_COLBIT_LSB;
+	row = (read_reg & ALTR_SDR_DRAMADDRW_ROWBIT_MASK) >>
+		ALTR_SDR_DRAMADDRW_ROWBIT_LSB;
+	bank = (read_reg & ALTR_SDR_DRAMADDRW_BANKBIT_MASK) >>
+		ALTR_SDR_DRAMADDRW_BANKBIT_LSB;
+	cs = (read_reg & ALTR_SDR_DRAMADDRW_CSBIT_MASK) >>
+		ALTR_SDR_DRAMADDRW_CSBIT_LSB;
+
+	if (regmap_read(mc_vbase, ALTR_SDR_DRAMIFWIDTH, &width) < 0)
+		return 0;
+
+	/* Correct for ECC as its not addressible */
+	if (width == ALTR_SDR_DRAMIFWIDTH_32B_ECC)
+		width = 32;
+	if (width == ALTR_SDR_DRAMIFWIDTH_16B_ECC)
+		width = 16;
+
+	/* calculate the SDRAM size base on this info */
+	size = 1 << (row + bank + col);
+	size = size * cs * (width / 8);
+	return size;
+}
+
+static int altr_sdram_mc_probe(struct platform_device *pdev)
+{
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct altr_sdram_mc_data *drvdata;
+	struct dimm_info *dimm;
+	u32 read_reg, mem_size;
+	int irq;
+	int res = 0, retcode;
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct altr_sdram_mc_data));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		edac_mc_free(mci);
+		return -ENOMEM;
+	}
+
+	/* Grab the register values from the sdr-ctl in device tree */
+	drvdata->mc_vbase = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+	if (IS_ERR(drvdata->mc_vbase)) {
+		dev_err(&pdev->dev,
+			"regmap for altr,sdr-ctl lookup failed.\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	retcode = regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
+	if (retcode || ((read_reg & ALTR_SDR_CTLCFG_ECC_AUTO_EN) !=
+		ALTR_SDR_CTLCFG_ECC_AUTO_EN)) {
+		dev_err(&pdev->dev, "No ECC present / ECC disabled - 0x%08X\n",
+			read_reg);
+		res = -ENODEV;
+		goto err;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = ALTR_EDAC_MOD_STR;
+	mci->mod_ver = "1";
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	/* Grab memory size from device tree. */
+	mem_size = altr_sdram_get_total_mem_size(drvdata->mc_vbase);
+	dimm = *mci->dimms;
+	if (mem_size <= 0) {
+		dev_err(&pdev->dev, "Unable to calculate memory size\n");
+		res = -ENODEV;
+		goto err;
+	}
+	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc(mci);
+	if (res < 0)
+		goto err;
+
+	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
+			ALTR_SDR_DRAMINTR_INTRCLR);
+	if (retcode) {
+		dev_err(&pdev->dev, "Error clearing SDRAM ECC IRQ\n");
+		res = -ENODEV;
+		goto err;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
+				0, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
+		res = -ENODEV;
+		goto err;
+	}
+
+	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
+		(ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
+	if (retcode) {
+		dev_err(&pdev->dev, "Error enabling SDRAM ECC IRQ\n");
+		res = -ENODEV;
+		goto err2;
+	}
+
+	altr_sdr_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	dev_err(&pdev->dev, "EDAC Probe Failed; Error %d\n", res);
+	devres_release_group(&pdev->dev, NULL);
+	edac_mc_free(mci);
+
+	return res;
+}
+
+static int altr_sdram_mc_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id altr_sdram_ctrl_of_match[] = {
+	{ .compatible = "altr,sdram-edac", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+
+static struct platform_driver altr_sdram_mc_edac_driver = {
+	.probe = altr_sdram_mc_probe,
+	.remove = altr_sdram_mc_remove,
+	.driver = {
+		.name = "altr_sdram_mc_edac",
+		.of_match_table = of_match_ptr(altr_sdram_ctrl_of_match),
+	},
+};
+
+module_platform_driver(altr_sdram_mc_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Altera Corporation");
+MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller");
-- 
1.7.9.5

Re: [PATCHv2 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[Pavel Machek]

Hi!

> From: Thor Thayer <tthayer@altera.com>
> 
> Added EDAC support for reporting ECC errors of CycloneV
> and ArriaV SDRAM controller.
> - The SDRAM Controller registers are used by the FPGA bridge so
>   these are accessed through the syscon interface.
> - The configuration of the SDRAM memory size for the EDAC framework
>   is discovered from the SDRAM Controller registers.
> - Documentation of the bindings in devicetree/bindings/arm/altera/
>   socfpga-sdram-edac.txt
> - Correction of single bit errors, detection of double bit errors.
> 
> ---
> v2: Use the SDRAM controller registers to calculate memory size
>     instead of the Device Tree. Update To & Cc list. Add maintainer 
>     information.

I'd reduce number of *s in the messages, otherwise

Reviewed-by: Pavel Machek <pavel@ucw.cz>

for whole series.
								Pavel

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Re: [PATCHv2 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[Thor Thayer]

On Mon, 2014-04-21 at 12:27 +0200, Pavel Machek wrote:
> Hi!
> 
> > From: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> > 
> > Added EDAC support for reporting ECC errors of CycloneV
> > and ArriaV SDRAM controller.
> > - The SDRAM Controller registers are used by the FPGA bridge so
> >   these are accessed through the syscon interface.
> > - The configuration of the SDRAM memory size for the EDAC framework
> >   is discovered from the SDRAM Controller registers.
> > - Documentation of the bindings in devicetree/bindings/arm/altera/
> >   socfpga-sdram-edac.txt
> > - Correction of single bit errors, detection of double bit errors.
> > 
> > ---
> > v2: Use the SDRAM controller registers to calculate memory size
> >     instead of the Device Tree. Update To & Cc list. Add maintainer 
> >     information.
> 
> I'd reduce number of *s in the messages, otherwise
> 
> Reviewed-by: Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>
> 
> for whole series.
> 								Pavel
> 
Hi Pavel.

Noted - I will make the change. Thank you for reviewing.

Thor

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv2 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[Borislav Petkov]

On Tue, Apr 15, 2014 at 06:30:10PM -0500, tthayer@altera.com wrote:
> From: Thor Thayer <tthayer@altera.com>
> 
> Added EDAC support for reporting ECC errors of CycloneV
> and ArriaV SDRAM controller.
> - The SDRAM Controller registers are used by the FPGA bridge so
>   these are accessed through the syscon interface.
> - The configuration of the SDRAM memory size for the EDAC framework
>   is discovered from the SDRAM Controller registers.
> - Documentation of the bindings in devicetree/bindings/arm/altera/
>   socfpga-sdram-edac.txt
> - Correction of single bit errors, detection of double bit errors.
> 
> ---
> v2: Use the SDRAM controller registers to calculate memory size
>     instead of the Device Tree. Update To & Cc list. Add maintainer 
>     information.
> 
> Signed-off-by: Thor Thayer <tthayer@altera.com>
> To: Rob Herring <robherring2@gmail.com>
> To: Doug Thompson <dougthompson@xmission.com>
> To: Grant Likely <grant.likely@linaro.org>
> To: Pawel Moll <pawel.moll@arm.com>
> To: Mark Rutland <mark.rutland@arm.com>
> To: Ian Campbell <ijc+devicetree@hellion.org.uk>
> To: Kumar Gala <galak@codeaurora.org>
> To: Rob Landley <rob@landley.net>
> To: Russell King <linux@arm.linux.org.uk>
> To: Dinh Nguyen <dinguyen@altera.com>
> Cc: Borislav Petkov <bp@alien8.de>
> Cc: devicetree@vger.kernel.org
> Cc: linux-edac@vger.kernel.org
> Cc: linux-kernel@vger.kernel.org
> ---
>  MAINTAINERS                   |    5 +
>  drivers/edac/Kconfig          |    9 +
>  drivers/edac/Makefile         |    2 +
>  drivers/edac/altera_mc_edac.c |  393 +++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 409 insertions(+)
>  create mode 100644 drivers/edac/altera_mc_edac.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index b8af16d..aee0746 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1249,6 +1249,11 @@ M:	Dinh Nguyen <dinguyen@altera.com>
>  S:	Maintained
>  F:	drivers/clk/socfpga/
>  
> +ARM/SOCFPGA SDRAM EDAC SUPPORT
> +M:	Thor Thayer <tthayer@altera.com>
> +S:	Maintained
> +F:	drivers/edac/altera_mc_edac.c
> +
>  ARM/STI ARCHITECTURE
>  M:	Srinivas Kandagatla <srinivas.kandagatla@st.com>
>  M:	Stuart Menefy <stuart.menefy@st.com>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 878f090..4f4d379 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
>  	  Support for error detection and correction on the
>  	  Cavium Octeon family of SOCs.
>  
> +config EDAC_ALTERA_MC
> +	bool "Altera SDRAM Memory Controller EDAC"
> +	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
> +	help
> +	  Support for error detection and correction on the
> +	  Altera SDRAM memory controller. Note that the
> +	  preloader must initialize the SDRAM before loading
> +	  the kernel.
> +
>  endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 4154ed6..e15d05f 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
>  obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
>  obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
>  obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
> +
> +obj-$(CONFIG_EDAC_ALTERA_MC)	        += altera_mc_edac.o
> diff --git a/drivers/edac/altera_mc_edac.c b/drivers/edac/altera_mc_edac.c
> new file mode 100644
> index 0000000..811b712
> --- /dev/null
> +++ b/drivers/edac/altera_mc_edac.c
> @@ -0,0 +1,393 @@
> +/*
> + *  Copyright Altera Corporation (C) 2014. All rights reserved.
> + *  Copyright 2011-2012 Calxeda, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.

Please drop this boilerplate and point to COPYING in a single sentence
stating that it is licensed under GPLv2.

> + *
> + * Adapted from the highbank_mc_edac driver
> + *
> + */
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/ctype.h>
> +#include <linux/edac.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/uaccess.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include "edac_core.h"
> +#include "edac_module.h"
> +
> +#define ALTR_EDAC_MOD_STR	"altera_edac"

and yet the filename is called altera_mc_edac.c. Please change it to
altera_edac.c too.

> +
> +/* SDRAM Controller CtrlCfg Register */
> +#define ALTR_SDR_CTLCFG			0x00
> +
> +/* SDRAM Controller CtrlCfg Register Bit Masks */
> +#define ALTR_SDR_CTLCFG_ECC_EN		0x400
> +#define ALTR_SDR_CTLCFG_ECC_CORR_EN	0x800
> +#define ALTR_SDR_CTLCFG_GEN_SB_ERR	0x2000
> +#define ALTR_SDR_CTLCFG_GEN_DB_ERR	0x4000
> +
> +#define ALTR_SDR_CTLCFG_ECC_AUTO_EN	(ALTR_SDR_CTLCFG_ECC_EN | \
> +					ALTR_SDR_CTLCFG_ECC_CORR_EN)
> +
> +/* SDRAM Controller Address Width Register */
> +#define ALTR_SDR_DRAMADDRW		0x2C
> +
> +/* SDRAM Controller Address Widths Field Register */
> +#define ALTR_SDR_DRAMADDRW_COLBIT_MASK	0x001F
> +#define ALTR_SDR_DRAMADDRW_COLBIT_LSB	0
> +#define ALTR_SDR_DRAMADDRW_ROWBIT_MASK	0x03E0
> +#define ALTR_SDR_DRAMADDRW_ROWBIT_LSB	5
> +#define ALTR_SDR_DRAMADDRW_BANKBIT_MASK	0x1C00
> +#define ALTR_SDR_DRAMADDRW_BANKBIT_LSB	10
> +#define ALTR_SDR_DRAMADDRW_CSBIT_MASK	0xE000
> +#define ALTR_SDR_DRAMADDRW_CSBIT_LSB	13
> +
> +/* SDRAM Controller Interface Data Width Register */
> +#define ALTR_SDR_DRAMIFWIDTH		0x30
> +
> +/* SDRAM Controller Interface Data Width Defines */
> +#define ALTR_SDR_DRAMIFWIDTH_16B_ECC	24
> +#define ALTR_SDR_DRAMIFWIDTH_32B_ECC	40
> +
> +/* SDRAM Controller DRAM Status Register */
> +#define ALTR_SDR_DRAMSTS		0x38
> +
> +/* SDRAM Controller DRAM Status Register Bit Masks */
> +#define ALTR_SDR_DRAMSTS_SBEERR		0x04
> +#define ALTR_SDR_DRAMSTS_DBEERR		0x08
> +#define ALTR_SDR_DRAMSTS_CORR_DROP	0x10
> +
> +/* SDRAM Controller DRAM IRQ Register */
> +#define ALTR_SDR_DRAMINTR		0x3C
> +
> +/* SDRAM Controller DRAM IRQ Register Bit Masks */
> +#define ALTR_SDR_DRAMINTR_INTREN	0x01
> +#define ALTR_SDR_DRAMINTR_SBEMASK	0x02
> +#define ALTR_SDR_DRAMINTR_DBEMASK	0x04
> +#define ALTR_SDR_DRAMINTR_CORRDROPMASK	0x08
> +#define ALTR_SDR_DRAMINTR_INTRCLR	0x10
> +
> +/* SDRAM Controller Single Bit Error Count Register */
> +#define ALTR_SDR_SBECOUNT		0x40
> +
> +/* SDRAM Controller Single Bit Error Count Register Bit Masks */
> +#define ALTR_SDR_SBECOUNT_MASK		0x0F
> +
> +/* SDRAM Controller Double Bit Error Count Register */
> +#define ALTR_SDR_DBECOUNT		0x44
> +
> +/* SDRAM Controller Double Bit Error Count Register Bit Masks */
> +#define ALTR_SDR_DBECOUNT_MASK		0x0F
> +
> +/* SDRAM Controller ECC Error Address Register */
> +#define ALTR_SDR_ERRADDR		0x48
> +
> +/* SDRAM Controller ECC Error Address Register Bit Masks */
> +#define ALTR_SDR_ERRADDR_MASK		0xFFFFFFFF
> +
> +/* SDRAM Controller ECC Autocorrect Drop Count Register */
> +#define ALTR_SDR_DROPCOUNT		0x4C
> +
> +/* SDRAM Controller ECC Autocorrect Drop Count Register Bit Masks */
> +#define ALTR_SDR_DROPCOUNT_MASK		0x0F
> +
> +/* SDRAM Controller ECC AutoCorrect Address Register */
> +#define ALTR_SDR_DROPADDR		0x50
> +
> +/* SDRAM Controller ECC AutoCorrect Error Address Register Bit Masks */
> +#define ALTR_SDR_DROPADDR_MASK		0xFFFFFFFF

Right, those defines are pefectly fine 'n all but they're used only
here, in thie file locally. So you probably could drop this "ALTR_SDR_"
prefix and thus make them substantially shorter and as a result, the
code more readable. It'll also shorten the code below, for example:

> +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_DRAMINTR,
> +		     (ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));

would become


	regmap_write(drvdata->mc_vbase,	DRAMINTR, (DRAMINTR_INTRCLR |
						   DRAMINTR_INTREN));

which one can read even with one eye opened. :-)

> +
> +/* Altera SDRAM Memory Controller data */
> +struct altr_sdram_mc_data {
> +	struct regmap *mc_vbase;
> +};
> +
> +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
> +{
> +	struct mem_ctl_info *mci = dev_id;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 status = 0, err_count = 0, err_addr = 0;
> +
> +	/* Error Address is shared by both SBE & DBE */
> +	regmap_read(drvdata->mc_vbase, ALTR_SDR_ERRADDR, &err_addr);
> +
> +	regmap_read(drvdata->mc_vbase, ALTR_SDR_DRAMSTS, &status);
> +
> +	if (status & ALTR_SDR_DRAMSTS_DBEERR) {
> +		regmap_read(drvdata->mc_vbase, ALTR_SDR_DBECOUNT, &err_count);
> +		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
> +		      err_count, err_addr);
> +	}

Right, ok, I guess you know what you're doing here. I'm guessing there's
no more graceful recovery than panic when encountering UEs on this
platform...

> +	if (status & ALTR_SDR_DRAMSTS_SBEERR) {
> +		regmap_read(drvdata->mc_vbase, ALTR_SDR_SBECOUNT, &err_count);
> +		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
> +				     err_addr >> PAGE_SHIFT,
> +				     err_addr & ~PAGE_MASK, 0,
> +				     0, 0, -1, mci->ctl_name, "");
> +	}
> +
> +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_DRAMINTR,
> +		     (ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
> +
> +	return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
> +					const char __user *data,
> +					size_t count, loff_t *ppos)
> +{

arg alignment.

> +	struct mem_ctl_info *mci = file->private_data;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 *ptemp;
> +	dma_addr_t dma_handle;
> +	u32 reg, read_reg = 0;
> +
> +	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
> +	if (IS_ERR(ptemp)) {
> +		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> +		dev_err(mci->pdev, "**EDAC Inject: Buffer Allocation error\n");

We have our own edac_*_printk... Feel free to adjust them if they don't
do exactly what you want them to do.

> +		return -ENOMEM;
> +	}
> +
> +	regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
> +	read_reg &= ~(ALTR_SDR_CTLCFG_GEN_SB_ERR | ALTR_SDR_CTLCFG_GEN_DB_ERR);
> +
> +	if (count == 3) {
> +		dev_alert(mci->pdev, "** EDAC Inject Double bit error\n");
> +		regmap_write(drvdata->mc_vbase, ALTR_SDR_CTLCFG,
> +			     (read_reg | ALTR_SDR_CTLCFG_GEN_DB_ERR));
> +	} else {
> +		dev_alert(mci->pdev, "** EDAC Inject Single bit error\n");
> +		regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG,
> +			     (read_reg | ALTR_SDR_CTLCFG_GEN_SB_ERR));
> +	}
> +
> +	ptemp[0] = 0x5A5A5A5A;
> +	ptemp[1] = 0xA5A5A5A5;
> +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG, read_reg);
> +	/* Ensure it has been written out */
> +	wmb();
> +
> +	reg = ptemp[0];
> +	read_reg = ptemp[1];

Those two assignments to local variables seem useless.

> +
> +	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> +
> +	return count;
> +}
> +
> +static const struct file_operations altr_sdr_mc_debug_inject_fops = {
> +	.open = simple_open,
> +	.write = altr_sdr_mc_err_inject_write,
> +	.llseek = generic_file_llseek,
> +};
> +
> +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
> +{
> +	if (mci->debugfs)
> +		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
> +				    &altr_sdr_mc_debug_inject_fops);
> +}
> +#else
> +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
> +{}
> +#endif
> +
> +/* Get total memory size in bytes */
> +static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
> +{
> +	u32 size;
> +	u32 read_reg, row, bank, col, cs, width;
> +	u32 retcode;
> +
> +	retcode = regmap_read(mc_vbase, ALTR_SDR_DRAMADDRW, &read_reg);
> +	if (retcode < 0)
> +		return 0;

It seems like you're using this retcode only once here. Either remove
it like in the second regmap_read() call below or use it consistently
throughout this function.

> +
> +	col = (read_reg & ALTR_SDR_DRAMADDRW_COLBIT_MASK) >>
> +		ALTR_SDR_DRAMADDRW_COLBIT_LSB;
> +	row = (read_reg & ALTR_SDR_DRAMADDRW_ROWBIT_MASK) >>
> +		ALTR_SDR_DRAMADDRW_ROWBIT_LSB;
> +	bank = (read_reg & ALTR_SDR_DRAMADDRW_BANKBIT_MASK) >>
> +		ALTR_SDR_DRAMADDRW_BANKBIT_LSB;
> +	cs = (read_reg & ALTR_SDR_DRAMADDRW_CSBIT_MASK) >>
> +		ALTR_SDR_DRAMADDRW_CSBIT_LSB;
> +
> +	if (regmap_read(mc_vbase, ALTR_SDR_DRAMIFWIDTH, &width) < 0)
> +		return 0;

You probably should do those regmap_read()s first, before you do all the
assignments so that you can save yourself the work if one of the reads
fails and you need to return.

> +
> +	/* Correct for ECC as its not addressible */
> +	if (width == ALTR_SDR_DRAMIFWIDTH_32B_ECC)
> +		width = 32;
> +	if (width == ALTR_SDR_DRAMIFWIDTH_16B_ECC)
> +		width = 16;
> +
> +	/* calculate the SDRAM size base on this info */
> +	size = 1 << (row + bank + col);
> +	size = size * cs * (width / 8);
> +	return size;
> +}
> +
> +static int altr_sdram_mc_probe(struct platform_device *pdev)
> +{
> +	struct edac_mc_layer layers[2];
> +	struct mem_ctl_info *mci;
> +	struct altr_sdram_mc_data *drvdata;
> +	struct dimm_info *dimm;
> +	u32 read_reg, mem_size;
> +	int irq;
> +	int res = 0, retcode;
> +
> +	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
> +	layers[0].size = 1;
> +	layers[0].is_virt_csrow = true;
> +	layers[1].type = EDAC_MC_LAYER_CHANNEL;
> +	layers[1].size = 1;
> +	layers[1].is_virt_csrow = false;
> +	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
> +			    sizeof(struct altr_sdram_mc_data));
> +	if (!mci)
> +		return -ENOMEM;
> +
> +	mci->pdev = &pdev->dev;
> +	drvdata = mci->pvt_info;
> +	platform_set_drvdata(pdev, mci);
> +
> +	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {

goto free;

and add a label which does edac_mc_free.

> +		edac_mc_free(mci);
> +		return -ENOMEM;
> +	}
> +
> +	/* Grab the register values from the sdr-ctl in device tree */
> +	drvdata->mc_vbase = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
> +	if (IS_ERR(drvdata->mc_vbase)) {
> +		dev_err(&pdev->dev,
> +			"regmap for altr,sdr-ctl lookup failed.\n");

edac_*_printk.


> +		res = -ENODEV;
> +		goto err;
> +	}
> +
> +	retcode = regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
> +	if (retcode || ((read_reg & ALTR_SDR_CTLCFG_ECC_AUTO_EN) !=
> +		ALTR_SDR_CTLCFG_ECC_AUTO_EN)) {
> +		dev_err(&pdev->dev, "No ECC present / ECC disabled - 0x%08X\n",
> +			read_reg);

ditto.

> +		res = -ENODEV;
> +		goto err;
> +	}
> +
> +	mci->mtype_cap = MEM_FLAG_DDR3;
> +	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
> +	mci->edac_cap = EDAC_FLAG_SECDED;
> +	mci->mod_name = ALTR_EDAC_MOD_STR;

Calling it just EDAC_MOD_STR is fine.

> +	mci->mod_ver = "1";

use a #define.

> +	mci->ctl_name = dev_name(&pdev->dev);
> +	mci->scrub_mode = SCRUB_SW_SRC;
> +	mci->dev_name = dev_name(&pdev->dev);
> +
> +	/* Grab memory size from device tree. */
> +	mem_size = altr_sdram_get_total_mem_size(drvdata->mc_vbase);
> +	dimm = *mci->dimms;
> +	if (mem_size <= 0) {
> +		dev_err(&pdev->dev, "Unable to calculate memory size\n");
> +		res = -ENODEV;
> +		goto err;
> +	}
> +	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
> +	dimm->grain = 8;
> +	dimm->dtype = DEV_X8;
> +	dimm->mtype = MEM_DDR3;
> +	dimm->edac_mode = EDAC_SECDED;
> +
> +	res = edac_mc_add_mc(mci);
> +	if (res < 0)
> +		goto err;
> +
> +	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
> +			ALTR_SDR_DRAMINTR_INTRCLR);
> +	if (retcode) {
> +		dev_err(&pdev->dev, "Error clearing SDRAM ECC IRQ\n");
> +		res = -ENODEV;
> +		goto err;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
> +				0, dev_name(&pdev->dev), mci);
> +	if (res < 0) {
> +		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
> +		res = -ENODEV;
> +		goto err;
> +	}
> +
> +	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
> +		(ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
> +	if (retcode) {
> +		dev_err(&pdev->dev, "Error enabling SDRAM ECC IRQ\n");
> +		res = -ENODEV;
> +		goto err2;
> +	}

Btw, you might want to restructure this function to do all your regmap
stuff, total memsize and other platform queries and once those succeed,
only then do edac_mc_alloc, edac_mc_add_mc, etc. This should save you a
lot of unwinding work in the error path.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Re: [PATCHv2 3/3] edac: altera: Add SDRAM EDAC support for CycloneV/ArriaV

[Thor Thayer]

On Wed, 2014-04-23 at 16:54 +0200, Borislav Petkov wrote:
> On Tue, Apr 15, 2014 at 06:30:10PM -0500, tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org wrote:
> > From: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> > 
> > Added EDAC support for reporting ECC errors of CycloneV
> > and ArriaV SDRAM controller.
> > - The SDRAM Controller registers are used by the FPGA bridge so
> >   these are accessed through the syscon interface.
> > - The configuration of the SDRAM memory size for the EDAC framework
> >   is discovered from the SDRAM Controller registers.
> > - Documentation of the bindings in devicetree/bindings/arm/altera/
> >   socfpga-sdram-edac.txt
> > - Correction of single bit errors, detection of double bit errors.
> > 
> > ---
> > v2: Use the SDRAM controller registers to calculate memory size
> >     instead of the Device Tree. Update To & Cc list. Add maintainer 
> >     information.
> > 
> > Signed-off-by: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>

[snip]

> > @@ -0,0 +1,393 @@
> > +/*
> > + *  Copyright Altera Corporation (C) 2014. All rights reserved.
> > + *  Copyright 2011-2012 Calxeda, Inc.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms and conditions of the GNU General Public License,
> > + * version 2, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> 
> Please drop this boilerplate and point to COPYING in a single sentence
> stating that it is licensed under GPLv2.

Thank you for reviewing. This is the only review item that may be a
problem. 

> > + *
> > + * Adapted from the highbank_mc_edac driver
> > + *
> > + */
> > +#include <linux/types.h>
> > +#include <linux/kernel.h>
> > +#include <linux/ctype.h>
> > +#include <linux/edac.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/uaccess.h>
> > +#include <linux/mfd/syscon.h>
> > +#include <linux/regmap.h>
> > +
> > +#include "edac_core.h"
> > +#include "edac_module.h"
> > +
> > +#define ALTR_EDAC_MOD_STR	"altera_edac"
> 
> and yet the filename is called altera_mc_edac.c. Please change it to
> altera_edac.c too.
> 
> > +
> > +/* SDRAM Controller CtrlCfg Register */

[snip]

> > +
> > +/* SDRAM Controller ECC AutoCorrect Error Address Register Bit Masks */
> > +#define ALTR_SDR_DROPADDR_MASK		0xFFFFFFFF
> 
> Right, those defines are pefectly fine 'n all but they're used only
> here, in thie file locally. So you probably could drop this "ALTR_SDR_"
> prefix and thus make them substantially shorter and as a result, the
> code more readable. It'll also shorten the code below, for example:
> 
> > +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_DRAMINTR,
> > +		     (ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
> 
> would become
> 
> 
> 	regmap_write(drvdata->mc_vbase,	DRAMINTR, (DRAMINTR_INTRCLR |
> 						   DRAMINTR_INTREN));
> 
> which one can read even with one eye opened. :-)
> 

Noted. I will make the change. Thanks.

> > +
> > +/* Altera SDRAM Memory Controller data */
> > +struct altr_sdram_mc_data {
> > +	struct regmap *mc_vbase;
> > +};
> > +
> > +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
> > +{
> > +	struct mem_ctl_info *mci = dev_id;
> > +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> > +	u32 status = 0, err_count = 0, err_addr = 0;
> > +
> > +	/* Error Address is shared by both SBE & DBE */
> > +	regmap_read(drvdata->mc_vbase, ALTR_SDR_ERRADDR, &err_addr);
> > +
> > +	regmap_read(drvdata->mc_vbase, ALTR_SDR_DRAMSTS, &status);
> > +
> > +	if (status & ALTR_SDR_DRAMSTS_DBEERR) {
> > +		regmap_read(drvdata->mc_vbase, ALTR_SDR_DBECOUNT, &err_count);
> > +		panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
> > +		      err_count, err_addr);
> > +	}
> 
> Right, ok, I guess you know what you're doing here. I'm guessing there's
> no more graceful recovery than panic when encountering UEs on this
> platform...
> 

The concern is that we could execute invalid instructions. I noticed the
'edac_mc_panic_on_ue' module parameter but wanted this to be obvious. I
will revisit the module parameter though. Thank you.

> > +	if (status & ALTR_SDR_DRAMSTS_SBEERR) {
> > +		regmap_read(drvdata->mc_vbase, ALTR_SDR_SBECOUNT, &err_count);
> > +		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
> > +				     err_addr >> PAGE_SHIFT,
> > +				     err_addr & ~PAGE_MASK, 0,
> > +				     0, 0, -1, mci->ctl_name, "");
> > +	}
> > +
> > +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_DRAMINTR,
> > +		     (ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
> > +
> > +	return IRQ_HANDLED;
> > +}
> > +
> > +#ifdef CONFIG_EDAC_DEBUG
> > +static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
> > +					const char __user *data,
> > +					size_t count, loff_t *ppos)
> > +{
> 
> arg alignment.
> 
Noted.
> > +	struct mem_ctl_info *mci = file->private_data;
> > +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> > +	u32 *ptemp;
> > +	dma_addr_t dma_handle;
> > +	u32 reg, read_reg = 0;
> > +
> > +	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
> > +	if (IS_ERR(ptemp)) {
> > +		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> > +		dev_err(mci->pdev, "**EDAC Inject: Buffer Allocation error\n");
> 
> We have our own edac_*_printk... Feel free to adjust them if they don't
> do exactly what you want them to do.
> 
Noted. Thanks.
> > +		return -ENOMEM;
> > +	}
> > +
> > +	regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
> > +	read_reg &= ~(ALTR_SDR_CTLCFG_GEN_SB_ERR | ALTR_SDR_CTLCFG_GEN_DB_ERR);
> > +
> > +	if (count == 3) {
> > +		dev_alert(mci->pdev, "** EDAC Inject Double bit error\n");
> > +		regmap_write(drvdata->mc_vbase, ALTR_SDR_CTLCFG,
> > +			     (read_reg | ALTR_SDR_CTLCFG_GEN_DB_ERR));
> > +	} else {
> > +		dev_alert(mci->pdev, "** EDAC Inject Single bit error\n");
> > +		regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG,
> > +			     (read_reg | ALTR_SDR_CTLCFG_GEN_SB_ERR));
> > +	}
> > +
> > +	ptemp[0] = 0x5A5A5A5A;
> > +	ptemp[1] = 0xA5A5A5A5;
> > +	regmap_write(drvdata->mc_vbase,	ALTR_SDR_CTLCFG, read_reg);
> > +	/* Ensure it has been written out */
> > +	wmb();
> > +
> > +	reg = ptemp[0];
> > +	read_reg = ptemp[1];
> 
> Those two assignments to local variables seem useless.
> 

This does seem useless but there is a reason.  A word containing 1 or 2
bit error is written out to memory and then this read from memory will
trigger the error condition.

> > +
> > +	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> > +
> > +	return count;
> > +}
> > +

[snip]

> > +/* Get total memory size in bytes */
> > +static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
> > +{
> > +	u32 size;
> > +	u32 read_reg, row, bank, col, cs, width;
> > +	u32 retcode;
> > +
> > +	retcode = regmap_read(mc_vbase, ALTR_SDR_DRAMADDRW, &read_reg);
> > +	if (retcode < 0)
> > +		return 0;
> 
> It seems like you're using this retcode only once here. Either remove
> it like in the second regmap_read() call below or use it consistently
> throughout this function.
> 
Noted. I will make this change. I found a number of other places as
well. Thanks.
> > +
> > +	col = (read_reg & ALTR_SDR_DRAMADDRW_COLBIT_MASK) >>
> > +		ALTR_SDR_DRAMADDRW_COLBIT_LSB;
> > +	row = (read_reg & ALTR_SDR_DRAMADDRW_ROWBIT_MASK) >>
> > +		ALTR_SDR_DRAMADDRW_ROWBIT_LSB;
> > +	bank = (read_reg & ALTR_SDR_DRAMADDRW_BANKBIT_MASK) >>
> > +		ALTR_SDR_DRAMADDRW_BANKBIT_LSB;
> > +	cs = (read_reg & ALTR_SDR_DRAMADDRW_CSBIT_MASK) >>
> > +		ALTR_SDR_DRAMADDRW_CSBIT_LSB;
> > +
> > +	if (regmap_read(mc_vbase, ALTR_SDR_DRAMIFWIDTH, &width) < 0)
> > +		return 0;
> 
> You probably should do those regmap_read()s first, before you do all the
> assignments so that you can save yourself the work if one of the reads
> fails and you need to return.
> 
Noted.

> > +
> > +	/* Correct for ECC as its not addressible */
> > +	if (width == ALTR_SDR_DRAMIFWIDTH_32B_ECC)
> > +		width = 32;
> > +	if (width == ALTR_SDR_DRAMIFWIDTH_16B_ECC)
> > +		width = 16;
> > +
> > +	/* calculate the SDRAM size base on this info */
> > +	size = 1 << (row + bank + col);
> > +	size = size * cs * (width / 8);
> > +	return size;
> > +}
> > +
> > +static int altr_sdram_mc_probe(struct platform_device *pdev)
> > +{
> > +	struct edac_mc_layer layers[2];
> > +	struct mem_ctl_info *mci;
> > +	struct altr_sdram_mc_data *drvdata;
> > +	struct dimm_info *dimm;
> > +	u32 read_reg, mem_size;
> > +	int irq;
> > +	int res = 0, retcode;
> > +
> > +	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
> > +	layers[0].size = 1;
> > +	layers[0].is_virt_csrow = true;
> > +	layers[1].type = EDAC_MC_LAYER_CHANNEL;
> > +	layers[1].size = 1;
> > +	layers[1].is_virt_csrow = false;
> > +	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
> > +			    sizeof(struct altr_sdram_mc_data));
> > +	if (!mci)
> > +		return -ENOMEM;
> > +
> > +	mci->pdev = &pdev->dev;
> > +	drvdata = mci->pvt_info;
> > +	platform_set_drvdata(pdev, mci);
> > +
> > +	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
> 
> goto free;
> 
> and add a label which does edac_mc_free.
> 

Noted.

> > +		edac_mc_free(mci);
> > +		return -ENOMEM;
> > +	}
> > +
> > +	/* Grab the register values from the sdr-ctl in device tree */
> > +	drvdata->mc_vbase = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
> > +	if (IS_ERR(drvdata->mc_vbase)) {
> > +		dev_err(&pdev->dev,
> > +			"regmap for altr,sdr-ctl lookup failed.\n");
> 
> edac_*_printk.
> 
> 
> > +		res = -ENODEV;
> > +		goto err;
> > +	}
> > +
> > +	retcode = regmap_read(drvdata->mc_vbase, ALTR_SDR_CTLCFG, &read_reg);
> > +	if (retcode || ((read_reg & ALTR_SDR_CTLCFG_ECC_AUTO_EN) !=
> > +		ALTR_SDR_CTLCFG_ECC_AUTO_EN)) {
> > +		dev_err(&pdev->dev, "No ECC present / ECC disabled - 0x%08X\n",
> > +			read_reg);
> 
> ditto.
> 
> > +		res = -ENODEV;
> > +		goto err;
> > +	}
> > +
> > +	mci->mtype_cap = MEM_FLAG_DDR3;
> > +	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
> > +	mci->edac_cap = EDAC_FLAG_SECDED;
> > +	mci->mod_name = ALTR_EDAC_MOD_STR;
> 
> Calling it just EDAC_MOD_STR is fine.
> 
> > +	mci->mod_ver = "1";
> 
> use a #define.
> 

Noted.

> > +	mci->ctl_name = dev_name(&pdev->dev);
> > +	mci->scrub_mode = SCRUB_SW_SRC;
> > +	mci->dev_name = dev_name(&pdev->dev);
> > +
> > +	/* Grab memory size from device tree. */
> > +	mem_size = altr_sdram_get_total_mem_size(drvdata->mc_vbase);
> > +	dimm = *mci->dimms;
> > +	if (mem_size <= 0) {
> > +		dev_err(&pdev->dev, "Unable to calculate memory size\n");
> > +		res = -ENODEV;
> > +		goto err;
> > +	}
> > +	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
> > +	dimm->grain = 8;
> > +	dimm->dtype = DEV_X8;
> > +	dimm->mtype = MEM_DDR3;
> > +	dimm->edac_mode = EDAC_SECDED;
> > +
> > +	res = edac_mc_add_mc(mci);
> > +	if (res < 0)
> > +		goto err;
> > +
> > +	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
> > +			ALTR_SDR_DRAMINTR_INTRCLR);
> > +	if (retcode) {
> > +		dev_err(&pdev->dev, "Error clearing SDRAM ECC IRQ\n");
> > +		res = -ENODEV;
> > +		goto err;
> > +	}
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
> > +				0, dev_name(&pdev->dev), mci);
> > +	if (res < 0) {
> > +		dev_err(&pdev->dev, "Unable to request irq %d\n", irq);
> > +		res = -ENODEV;
> > +		goto err;
> > +	}
> > +
> > +	retcode = regmap_write(drvdata->mc_vbase, ALTR_SDR_DRAMINTR,
> > +		(ALTR_SDR_DRAMINTR_INTRCLR | ALTR_SDR_DRAMINTR_INTREN));
> > +	if (retcode) {
> > +		dev_err(&pdev->dev, "Error enabling SDRAM ECC IRQ\n");
> > +		res = -ENODEV;
> > +		goto err2;
> > +	}
> 
> Btw, you might want to restructure this function to do all your regmap
> stuff, total memsize and other platform queries and once those succeed,
> only then do edac_mc_alloc, edac_mc_add_mc, etc. This should save you a
> lot of unwinding work in the error path.
> 

Hi Boris,

Thank you for reviewing and I'll make your changes. I will need to check
on the file header licensing change because our contributions are
dictated by our corporate policy.

Thor
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html