From: Santosh Shilimkar <santosh.shilimkar@ti.com>
To: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org,
Grygorii Strashko <grygorii.strashko@ti.com>,
Russell King <linux@arm.linux.org.uk>,
Arnd Bergmann <arnd@arndb.de>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Linus Walleij <linus.walleij@linaro.org>,
Grant Likely <grant.likely@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Santosh Shilimkar <santosh.shilimkar@ti.com>,
Catalin Marinas <catalin.marinas@arm.com>,
Olof Johansson <olof@lixom.net>,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/7] device: introduce per device dma_pfn_offset
Date: Thu, 24 Apr 2014 11:30:01 -0400 [thread overview]
Message-ID: <1398353407-2345-2-git-send-email-santosh.shilimkar@ti.com> (raw)
In-Reply-To: <1398353407-2345-1-git-send-email-santosh.shilimkar@ti.com>
On few architectures, there are few restrictions on DMAble area of system
RAM. That also means that devices needs to know about this restrictions so
that the dma_masks can be updated accordingly and dma address translation
helpers can add/subtract the dma offset.
In most of cases DMA addresses can be performed using offset value of
Bus address space relatively to physical address space as following:
PFN->DMA: __pfn_to_phys(pfn + [-]dma_pfn_offset)
DMA->PFN: __phys_to_pfn(dma_addr) + [-]dma_pfn_offset
So we introduce per device dma_pfn_offset which can be popullated
by architecture init code while creating the devices.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Olof Johansson <olof@lixom.net>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
---
include/linux/device.h | 2 ++
1 file changed, 2 insertions(+)
diff --git a/include/linux/device.h b/include/linux/device.h
index 233bbbe..85a52d6 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -691,6 +691,7 @@ struct acpi_dev_node {
* @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all
* hardware supports 64-bit addresses for consistent allocations
* such descriptors.
+ * @dma_pfn_offset: offset of DMA memory range relatively of RAM
* @dma_parms: A low level driver may set these to teach IOMMU code about
* segment limitations.
* @dma_pools: Dma pools (if dma'ble device).
@@ -756,6 +757,7 @@ struct device {
not all hardware supports
64 bit addresses for consistent
allocations such descriptors. */
+ unsigned long dma_pfn_offset;
struct device_dma_parameters *dma_parms;
--
1.7.9.5
next prev parent reply other threads:[~2014-04-24 15:30 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-04-24 15:30 [PATCH v3 0/7] of: setup dma parameters using dma-ranges and dma-coherent Santosh Shilimkar
2014-04-24 15:30 ` Santosh Shilimkar [this message]
2014-05-02 1:01 ` [PATCH v3 1/7] device: introduce per device dma_pfn_offset Rob Herring
2014-04-24 15:30 ` [PATCH v3 2/7] of: introduce of_dma_get_range() helper Santosh Shilimkar
[not found] ` <1398353407-2345-3-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-05-02 1:06 ` Rob Herring
2014-04-24 15:30 ` [PATCH v3 4/7] of: configure the platform device dma parameters Santosh Shilimkar
2014-04-29 14:41 ` Grant Likely
[not found] ` <20140429144147.004EEC40992-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2014-04-30 14:19 ` Santosh Shilimkar
[not found] ` <53610663.7070305-l0cyMroinI0@public.gmane.org>
2014-05-01 13:12 ` Grant Likely
[not found] ` <20140501131210.CCC13C409DA-WNowdnHR2B42iJbIjFUEsiwD8/FfD2ys@public.gmane.org>
2014-05-01 13:16 ` Santosh Shilimkar
2014-05-02 9:58 ` Arnd Bergmann
2014-05-02 13:13 ` Santosh Shilimkar
[not found] ` <53639A0C.8070306-l0cyMroinI0@public.gmane.org>
2014-05-02 15:13 ` Arnd Bergmann
2014-05-27 12:56 ` Grant Likely
2014-05-27 13:30 ` Arnd Bergmann
2014-05-28 8:23 ` Linus Walleij
[not found] ` <CACRpkdZjEVYgq7tKEfmZC0Fu4n=JuUues=pAAtquLahkex=pkA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-28 13:29 ` Arnd Bergmann
2014-05-28 13:32 ` Linus Walleij
[not found] ` <CACRpkda5x-fJWTN40ze17woMWuWoVbuhbNu5nkm1sFcdJchRfA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-28 14:04 ` Santosh Shilimkar
2014-05-29 14:01 ` Linus Walleij
2014-05-29 14:08 ` Santosh Shilimkar
[not found] ` <53873F4A.9030303-l0cyMroinI0@public.gmane.org>
2014-05-29 19:24 ` Arnd Bergmann
2014-05-29 20:04 ` Santosh Shilimkar
[not found] ` <1398353407-2345-5-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-05-02 0:49 ` Rob Herring
[not found] ` <CAL_Jsq+nh26NZXx-9Y5FTxWZdVrG7aLTOBhC4j9P8mPPvUu2ag-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-05 21:47 ` Santosh Shilimkar
2014-05-05 22:08 ` Rob Herring
2014-05-06 9:40 ` Arnd Bergmann
2014-05-06 20:44 ` Santosh Shilimkar
2014-05-07 13:24 ` Santosh Shilimkar
2014-05-02 16:54 ` Bjorn Helgaas
2014-05-02 18:59 ` Arnd Bergmann
2014-05-05 20:45 ` Bjorn Helgaas
[not found] ` <CAErSpo5-FXmVs8BWRYKz9Ln1g1Ls7_uo3oiPd32fUegf3d8hXQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-05 20:55 ` Arnd Bergmann
2014-05-05 22:28 ` Bjorn Helgaas
2014-05-06 3:44 ` Benjamin Herrenschmidt
2014-05-06 9:54 ` Arnd Bergmann
2014-05-06 13:32 ` Santosh Shilimkar
2014-04-24 15:30 ` [PATCH v3 5/7] ARM: dma: Use dma_pfn_offset for dma address translation Santosh Shilimkar
[not found] ` <1398353407-2345-6-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-05-02 14:32 ` Rob Herring
2014-05-02 14:58 ` Russell King - ARM Linux
2014-05-02 15:05 ` Santosh Shilimkar
2014-05-05 19:50 ` Russell King - ARM Linux
[not found] ` <20140505195040.GE3693-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-05-05 21:43 ` Santosh Shilimkar
[not found] ` <1398353407-2345-1-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-04-24 15:30 ` [PATCH v3 3/7] of: introduce of_dma_is_coherent() helper Santosh Shilimkar
[not found] ` <1398353407-2345-4-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-05-02 0:56 ` Rob Herring
2014-05-05 21:45 ` Santosh Shilimkar
[not found] ` <5368068C.3090403-l0cyMroinI0@public.gmane.org>
2014-05-05 22:06 ` Rob Herring
2014-04-24 15:30 ` [PATCH v3 6/7] ARM: dma: implement set_arch_dma_coherent_ops() Santosh Shilimkar
[not found] ` <1398353407-2345-7-git-send-email-santosh.shilimkar-l0cyMroinI0@public.gmane.org>
2014-05-02 0:58 ` Rob Herring
2014-05-01 13:19 ` [PATCH v3 0/7] of: setup dma parameters using dma-ranges and dma-coherent Santosh Shilimkar
2014-05-01 13:25 ` Russell King - ARM Linux
[not found] ` <20140501132516.GG26756-l+eeeJia6m9vn6HldHNs0ANdhmdF6hFW@public.gmane.org>
2014-05-01 14:06 ` Santosh Shilimkar
2014-05-02 14:41 ` Rob Herring
2014-05-02 16:41 ` Santosh Shilimkar
2014-05-14 10:12 ` Grant Likely
2014-04-24 15:30 ` [PATCH v3 7/7] ARM: dma: use phys_addr_t in __dma_page_[cpu_to_dev/dev_to_cpu] Santosh Shilimkar
2014-04-24 15:45 ` Will Deacon
2014-06-02 6:37 ` [PATCH v3 0/7] of: setup dma parameters using dma-ranges and dma-coherent Shawn Guo
2014-06-02 13:24 ` Santosh Shilimkar
[not found] ` <538C7B22.2020107-l0cyMroinI0@public.gmane.org>
2014-06-02 15:06 ` Arnd Bergmann
2014-06-02 15:54 ` Santosh Shilimkar
2014-06-02 19:00 ` Arnd Bergmann
2014-06-02 19:08 ` Santosh Shilimkar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1398353407-2345-2-git-send-email-santosh.shilimkar@ti.com \
--to=santosh.shilimkar@ti.com \
--cc=arnd@arndb.de \
--cc=catalin.marinas@arm.com \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=gregkh@linuxfoundation.org \
--cc=grygorii.strashko@ti.com \
--cc=linus.walleij@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=olof@lixom.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).