From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tim Kryger Subject: [PATCH v6 RESEND 1/5] Documentation: dt: Add Kona PWM binding Date: Fri, 25 Apr 2014 11:31:11 -0700 Message-ID: <1398450675-19609-2-git-send-email-tim.kryger@linaro.org> References: <1398450675-19609-1-git-send-email-tim.kryger@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <1398450675-19609-1-git-send-email-tim.kryger@linaro.org> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=m.gmane.org@lists.infradead.org To: Thierry Reding , Matt Porter , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Randy Dunlap , Christian Daudt , Grant Likely Cc: Linux PWM List , Linux Doc List , Tim Kryger , Linux Kernel Mailing List , Device Tree List , Broadcom Kernel Feedback List , Linux ARM Kernel List List-Id: devicetree@vger.kernel.org Add the binding description for the Kona PWM controller found on Broadcom's mobile SoCs. Signed-off-by: Tim Kryger Reviewed-by: Alex Elder Reviewed-by: Markus Mayer --- .../devicetree/bindings/pwm/bcm-kona-pwm.txt | 21 ++++++++++++++++++++ 1 file changed, 21 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt diff --git a/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt new file mode 100644 index 0000000..8eae9fe --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt @@ -0,0 +1,21 @@ +Broadcom Kona PWM controller device tree bindings + +This controller has 6 channels. + +Required Properties : +- compatible: should contain "brcm,kona-pwm" +- reg: physical base address and length of the controller's registers +- clocks: phandle + clock specifier pair for the external clock +- #pwm-cells: Should be 3. See pwm.txt in this directory for a + description of the cells format. + +Refer to clocks/clock-bindings.txt for generic clock consumer properties. + +Example: + +pwm: pwm@3e01a000 { + compatible = "brcm,bcm11351-pwm", "brcm,kona-pwm"; + reg = <0x3e01a000 0xc4>; + clocks = <&pwm_clk>; + #pwm-cells = <3>; +}; -- 1.7.9.5