devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Roger Quadros <rogerq@ti.com>
To: dmitry.torokhov@gmail.com
Cc: rydberg@euromail.se, balbi@ti.com, dmurphy@ti.com,
	mugunthanvnm@ti.com, nsekhar@ti.com, linux-input@vger.kernel.org,
	linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
	Roger Quadros <rogerq@ti.com>
Subject: [PATCH v3 6/7] Input: pixcir_i2c_ts: Implement wakeup from suspend
Date: Wed, 30 Apr 2014 15:36:31 +0300	[thread overview]
Message-ID: <1398861392-8959-7-git-send-email-rogerq@ti.com> (raw)
In-Reply-To: <1398861392-8959-1-git-send-email-rogerq@ti.com>

Improve the suspend and resume handlers to allow the device
to wakeup the system from suspend.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Acked-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 drivers/input/touchscreen/pixcir_i2c_ts.c | 53 ++++++++++++++++++++++++++++---
 1 file changed, 49 insertions(+), 4 deletions(-)

diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
index b3ff62c..ea31e20 100644
--- a/drivers/input/touchscreen/pixcir_i2c_ts.c
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -352,21 +352,66 @@ static void pixcir_input_close(struct input_dev *dev)
 static int pixcir_i2c_ts_suspend(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		ret = pixcir_stop(ts);
+		if (ret)
+			goto unlock;
+	}
+
+	/*
+	 * If wakeup is enabled we need to enable interrupt generation
+	 * but don't need to process any reports i.e. ts->exiting must be true.
+	 */
+	if (device_may_wakeup(&client->dev)) {
+		/* enable wakeup interrupt generation */
+		ret = pixcir_int_enable(ts, 1);
+		if (ret) {
+			dev_err(dev, "Failed to enable interrupt generation\n");
+			goto unlock;
+		}
 
-	if (device_may_wakeup(&client->dev))
 		enable_irq_wake(client->irq);
+	}
 
-	return 0;
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 
 static int pixcir_i2c_ts_resume(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
 
-	if (device_may_wakeup(&client->dev))
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
 		disable_irq_wake(client->irq);
 
-	return 0;
+		/* disable wakeup interrupt generation */
+		ret = pixcir_int_enable(ts, 0);
+		if (ret) {
+			dev_err(dev, "Failed to disable interrupt generation\n");
+			goto unlock;
+		}
+	}
+
+	if (input->users)
+		ret = pixcir_start(ts);
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
 }
 #endif
 
-- 
1.8.3.2

  parent reply	other threads:[~2014-04-30 12:36 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-30 12:36 [PATCH v3 0/7] Input: pixcir_i2c_ts: Add Type-B Multi-touch and DT support Roger Quadros
2014-04-30 12:36 ` [PATCH v3 1/7] Input: pixcir_i2c_ts: Use devres managed resource allocations Roger Quadros
     [not found]   ` <1398861392-8959-2-git-send-email-rogerq-l0cyMroinI0@public.gmane.org>
2014-04-30 16:30     ` Dmitry Torokhov
2014-05-05  8:44       ` Roger Quadros
2014-04-30 12:36 ` [PATCH v3 2/7] Input: pixcir_i2c_ts: Initialize interrupt mode and power mode Roger Quadros
2014-04-30 16:29   ` Dmitry Torokhov
2014-05-05  8:42     ` Roger Quadros
2014-04-30 12:36 ` [PATCH v3 3/7] Input: pixcir_i2c_ts: Get rid of pdata->attb_read_val() Roger Quadros
2014-04-30 12:36 ` [PATCH v3 4/7] Input: pixcir_i2c_ts: Use Type-B Multi-Touch protocol Roger Quadros
2014-04-30 12:36 ` [PATCH v3 5/7] Input: pixcir_i2c_ts: support upto 5 fingers and hardware provided tracking IDs Roger Quadros
2014-04-30 12:36 ` Roger Quadros [this message]
2014-04-30 12:36 ` [PATCH v3 7/7] Input: pixcir_i2c_ts: Add device tree support Roger Quadros

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398861392-8959-7-git-send-email-rogerq@ti.com \
    --to=rogerq@ti.com \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=dmitry.torokhov@gmail.com \
    --cc=dmurphy@ti.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mugunthanvnm@ti.com \
    --cc=nsekhar@ti.com \
    --cc=rydberg@euromail.se \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).