From mboxrd@z Thu Jan 1 00:00:00 1970 From: Roger Quadros Subject: [PATCH v3 2/7] phy: omap-usb2: Add clock names to Documentation binding Date: Mon, 5 May 2014 12:54:41 +0300 Message-ID: <1399283686-6127-3-git-send-email-rogerq@ti.com> References: <1399283686-6127-1-git-send-email-rogerq@ti.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: In-Reply-To: <1399283686-6127-1-git-send-email-rogerq@ti.com> Sender: linux-omap-owner@vger.kernel.org To: kishon@ti.com, tony@atomide.com, balbi@ti.com, bcousson@baylibre.com Cc: george.cherian@ti.com, sergei.shtylyov@cogentembedded.com, nm@ti.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-usb@vger.kernel.org, Roger Quadros List-Id: devicetree@vger.kernel.org Add "wkupclk" and "refclk" information to DT binding information. Reviewed-by: Felipe Balbi Signed-off-by: Roger Quadros --- Documentation/devicetree/bindings/phy/ti-phy.txt | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 788fb0f..9ce458f 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -32,6 +32,11 @@ Required properties: - reg : Address and length of the register set for the device. - #phy-cells: determine the number of cells that should be given in the phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "refclk" - reference clock (optional). Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on @@ -44,6 +49,8 @@ usb2phy@4a0ad080 { reg = <0x4a0ad080 0x58>; ctrl-module = <&omap_control_usb>; #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", "refclk"; }; TI PIPE3 PHY -- 1.8.3.2