[PATCH v3 4/7] ARM: dts: dra7-clock: Add "l3init_960m_gfclk" clock gate

[Roger Quadros <rogerq@ti.com>]

This clock gate description is missing in the older Reference manuals.
It is present on the SoC to provide 960MHz reference clock to the
internal USB PHYs.

Reference: DRA75x_DRA74x_ES1.1_NDA_TRM_vO.pdf, pg. 900,
Table 3-812. CM_COREAON_L3INIT_60M_GFCLK_CLKCTRL

Use l3init_960m_gfclk as parent of usb_otg_ss1_refclk960m and
usb_otg_ss2_refclk960m.

CC: Benoît Cousson <bcousson@baylibre.com>
CC: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Roger Quadros <rogerq@ti.com>
---
 arch/arm/boot/dts/dra7xx-clocks.dtsi | 12 ++++++++++--
 1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi
index cfb8fc7..c767687 100644
--- a/arch/arm/boot/dts/dra7xx-clocks.dtsi
+++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi
@@ -1386,6 +1386,14 @@
 		ti,dividers = <1>, <8>;
 	};
 
+	l3init_960m_gfclk: l3init_960m_gfclk {
+		#clock-cells = <0>;
+		compatible = "ti,gate-clock";
+		clocks = <&dpll_usb_clkdcoldo>;
+		ti,bit-shift = <8>;
+		reg = <0x06c0>;
+	};
+
 	dss_32khz_clk: dss_32khz_clk {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
@@ -1533,7 +1541,7 @@
 	usb_otg_ss1_refclk960m: usb_otg_ss1_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x13f0>;
 	};
@@ -1541,7 +1549,7 @@
 	usb_otg_ss2_refclk960m: usb_otg_ss2_refclk960m {
 		#clock-cells = <0>;
 		compatible = "ti,gate-clock";
-		clocks = <&dpll_usb_clkdcoldo>;
+		clocks = <&l3init_960m_gfclk>;
 		ti,bit-shift = <8>;
 		reg = <0x1340>;
 	};
-- 
1.8.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html