From: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
To: linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org
Cc: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
Subject: [RFC] [v2 Patch 5/6] ARM: dts: dra7: Add prm_resets node
Date: Mon, 5 May 2014 15:09:26 -0500 [thread overview]
Message-ID: <1399320567-3639-6-git-send-email-dmurphy@ti.com> (raw)
In-Reply-To: <1399320567-3639-1-git-send-email-dmurphy-l0cyMroinI0@public.gmane.org>
Add the prcm_resets node to the prm parent node.
Add the draxx_resets file to define the
dra7xx reset lines that are handled by this reset
framework.
Signed-off-by: Dan Murphy <dmurphy-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/dra7.dtsi | 7 +++
arch/arm/boot/dts/dra7xx-resets.dtsi | 82 ++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
create mode 100644 arch/arm/boot/dts/dra7xx-resets.dtsi
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 149b550..c008996 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -120,6 +120,12 @@
prm_clockdomains: clockdomains {
};
+
+ prm_resets: resets {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #reset-cells = <1>;
+ };
};
cm_core_aon: cm_core_aon@4a005000 {
@@ -793,3 +799,4 @@
};
/include/ "dra7xx-clocks.dtsi"
+/include/ "dra7xx-resets.dtsi"
diff --git a/arch/arm/boot/dts/dra7xx-resets.dtsi b/arch/arm/boot/dts/dra7xx-resets.dtsi
new file mode 100644
index 0000000..4c4966d
--- /dev/null
+++ b/arch/arm/boot/dts/dra7xx-resets.dtsi
@@ -0,0 +1,82 @@
+/*
+ * Device Tree Source for DRA7XX reset data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&prm_resets {
+ dsp_rstctrl {
+ reg = <0x410>,
+ <0x414>;
+
+ dsp_reset: dsp_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+
+ dsp_mmu_reset: dsp_mmu_reset {
+ control-bit = <0x02>;
+ status-bit = <0x02>;
+ };
+ };
+
+ ipu_rstctrl {
+ reg = <0x510>,
+ <0x514>;
+
+ ipu_cpu0_reset: ipu_cpu0_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+
+ ipu_cpu1_reset: ipu_cpu1_reset {
+ control-bit = <0x02>;
+ status-bit = <0x02>;
+ };
+
+ ipu_mmu_reset: ipu_mmu_reset {
+ control-bit = <0x04>;
+ status-bit = <0x04>;
+ };
+ };
+
+ iva_rstctrl {
+ reg = <0xf10>,
+ <0xf14>;
+
+ iva_reset: iva_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+ };
+
+ pcie_rstctrl {
+ reg = <0x1310>,
+ <0x1314>;
+
+ pcie1_reset: pcie1_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+
+ pcie2_reset: pcie2_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+ };
+
+ device_rstctrl {
+ reg = <0x1D00>,
+ <0x1D04>;
+
+ device_reset: device_reset {
+ control-bit = <0x01>;
+ status-bit = <0x01>;
+ };
+ };
+
+};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-05-05 20:09 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-05 20:09 [RFC v2] TI Reset Driver adapted to the reset core Dan Murphy
2014-05-05 20:09 ` [RFC] [v2 Patch 1/6] drivers: reset: TI: SoC reset controller support Dan Murphy
2014-05-05 21:33 ` Felipe Balbi
2014-05-06 13:14 ` Dan Murphy
[not found] ` <5368E01C.9000709-l0cyMroinI0@public.gmane.org>
2014-05-06 15:32 ` Felipe Balbi
[not found] ` <1399320567-3639-1-git-send-email-dmurphy-l0cyMroinI0@public.gmane.org>
2014-05-05 20:09 ` [RFC] [v2 Patch 2/6] ARM: TI: Describe the ti reset DT entries Dan Murphy
[not found] ` <1399320567-3639-3-git-send-email-dmurphy-l0cyMroinI0@public.gmane.org>
2014-05-05 22:01 ` Tony Lindgren
2014-05-06 13:18 ` Dan Murphy
2014-05-12 18:46 ` Suman Anna
2014-05-05 20:09 ` [RFC] [v2 Patch 3/6] ARM: dts: am33xx: Add prcm_resets node Dan Murphy
2014-05-05 20:09 ` Dan Murphy [this message]
2014-05-05 20:09 ` [RFC] [v2 Patch 4/6] ARM: dts: am4372: " Dan Murphy
2014-05-05 20:09 ` [RFC] [v2 Patch 6/6] ARM: dts: omap5: Add prm_resets node Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399320567-3639-6-git-send-email-dmurphy@ti.com \
--to=dmurphy-l0cymroini0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).