devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dan Murphy <dmurphy@ti.com>
To: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, tony@atomide.com
Cc: Dan Murphy <dmurphy@ti.com>
Subject: [RFC] [v2 Patch 6/6] ARM: dts: omap5: Add prm_resets node
Date: Mon, 5 May 2014 15:09:27 -0500	[thread overview]
Message-ID: <1399320567-3639-7-git-send-email-dmurphy@ti.com> (raw)
In-Reply-To: <1399320567-3639-1-git-send-email-dmurphy@ti.com>

Add the prm_resets node to the prm parent node.

Add the omap54xx_resets file to define the
omap5 reset lines that are handled by this reset
framework.

Signed-off-by: Dan Murphy <dmurphy@ti.com>
---
 arch/arm/boot/dts/omap5.dtsi           |    7 ++++
 arch/arm/boot/dts/omap54xx-resets.dtsi |   66 ++++++++++++++++++++++++++++++++
 2 files changed, 73 insertions(+)
 create mode 100644 arch/arm/boot/dts/omap54xx-resets.dtsi

diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index f8c9855..b6e3c4c 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -134,6 +134,12 @@
 
 			prm_clockdomains: clockdomains {
 			};
+
+			prm_resets: resets {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				#reset-cells = <1>;
+			};
 		};
 
 		cm_core_aon: cm_core_aon@4a004000 {
@@ -873,3 +879,4 @@
 };
 
 /include/ "omap54xx-clocks.dtsi"
+/include/ "omap54xx-resets.dtsi"
diff --git a/arch/arm/boot/dts/omap54xx-resets.dtsi b/arch/arm/boot/dts/omap54xx-resets.dtsi
new file mode 100644
index 0000000..cba6f52
--- /dev/null
+++ b/arch/arm/boot/dts/omap54xx-resets.dtsi
@@ -0,0 +1,66 @@
+/*
+ * Device Tree Source for OMAP5 reset data
+ *
+ * Copyright (C) 2014 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+&prm_resets {
+	dsp_rstctrl {
+		reg = <0x1c00>,
+			  <0x1c04>;
+
+		dsp_reset: dsp_reset {
+			control-bit = <0x01>;
+			status-bit = <0x01>;
+		};
+
+		dsp_mmu_reset: dsp_mmu_reset {
+			control-bit = <0x02>;
+			status-bit = <0x02>;
+		};
+	};
+
+	ipu_rstctrl {
+		reg = <0x910>,
+			  <0x914>;
+
+		ipu_cpu0_reset: ipu_cpu0_reset {
+			control-bit = <0x01>;
+			status-bit = <0x01>;
+		};
+
+		ipu_cpu1_reset: ipu_cpu1_reset {
+			control-bit = <0x02>;
+			status-bit = <0x02>;
+		};
+
+		ipu_mmu_reset: ipu_mmu_reset {
+			control-bit = <0x04>;
+			status-bit = <0x04>;
+		};
+	};
+
+	iva_rstctrl {
+		reg = <0x1210>,
+			  <0x1214>;
+
+		iva_reset: iva_reset {
+			control-bit = <0x01>;
+			status-bit = <0x01>;
+		};
+	};
+
+	device_rstctrl {
+		reg = <0x1c00>,
+			  <0x1c04>;
+
+		device_reset: device_reset {
+			control-bit = <0x01>;
+			status-bit = <0x01>;
+		};
+	};
+};
-- 
1.7.9.5


      parent reply	other threads:[~2014-05-05 20:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-05 20:09 [RFC v2] TI Reset Driver adapted to the reset core Dan Murphy
2014-05-05 20:09 ` [RFC] [v2 Patch 1/6] drivers: reset: TI: SoC reset controller support Dan Murphy
2014-05-05 21:33   ` Felipe Balbi
2014-05-06 13:14     ` Dan Murphy
     [not found]       ` <5368E01C.9000709-l0cyMroinI0@public.gmane.org>
2014-05-06 15:32         ` Felipe Balbi
     [not found] ` <1399320567-3639-1-git-send-email-dmurphy-l0cyMroinI0@public.gmane.org>
2014-05-05 20:09   ` [RFC] [v2 Patch 2/6] ARM: TI: Describe the ti reset DT entries Dan Murphy
     [not found]     ` <1399320567-3639-3-git-send-email-dmurphy-l0cyMroinI0@public.gmane.org>
2014-05-05 22:01       ` Tony Lindgren
2014-05-06 13:18         ` Dan Murphy
2014-05-12 18:46           ` Suman Anna
2014-05-05 20:09   ` [RFC] [v2 Patch 3/6] ARM: dts: am33xx: Add prcm_resets node Dan Murphy
2014-05-05 20:09   ` [RFC] [v2 Patch 5/6] ARM: dts: dra7: Add prm_resets node Dan Murphy
2014-05-05 20:09 ` [RFC] [v2 Patch 4/6] ARM: dts: am4372: Add prcm_resets node Dan Murphy
2014-05-05 20:09 ` Dan Murphy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1399320567-3639-7-git-send-email-dmurphy@ti.com \
    --to=dmurphy@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).