From: Kishon Vijay Abraham I <kishon@ti.com>
To: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-omap@vger.kernel.org,
linux-pci@vger.kernel.org
Cc: rogerq@ti.com, balajitk@ti.com,
Kishon Vijay Abraham I <kishon@ti.com>,
Tony Lindgren <tony@atomide.com>,
Russell King <linux@arm.linux.org.uk>
Subject: [PATCH 10/17] arm: dra7xx: Add hwmod data for pcie1 and pcie2 subsystems
Date: Tue, 6 May 2014 19:03:56 +0530 [thread overview]
Message-ID: <1399383244-14556-11-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1399383244-14556-1-git-send-email-kishon@ti.com>
Added hwmod data for pcie1 and pcie2 subsystem present in DRA7xx SOC.
Cc: Tony Lindgren <tony@atomide.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 55 +++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 1282a42..a51fa7f 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1231,6 +1231,43 @@ static struct omap_hwmod dra7xx_ocp2scp3_hwmod = {
};
/*
+ * 'PCIE' class
+ *
+ */
+
+static struct omap_hwmod_class dra7xx_pcie_hwmod_class = {
+ .name = "pcie",
+};
+
+/* pcie1 */
+static struct omap_hwmod dra7xx_pcie1_hwmod = {
+ .name = "pcie1",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* pcie2 */
+static struct omap_hwmod dra7xx_pcie2_hwmod = {
+ .name = "pcie2",
+ .class = &dra7xx_pcie_hwmod_class,
+ .clkdm_name = "l3init_clkdm",
+ .main_clk = "l4_root_clk_div",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_PCIE_CLKSTCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/*
* 'PCIE PHY' class
*
*/
@@ -2388,6 +2425,22 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__ocp2scp1 = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_cfg -> pcie1 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie1_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_cfg -> pcie2 */
+static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie2 = {
+ .master = &dra7xx_l4_cfg_hwmod,
+ .slave = &dra7xx_pcie2_hwmod,
+ .clk = "l4_root_clk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_cfg -> pcie1 phy */
static struct omap_hwmod_ocp_if dra7xx_l4_cfg__pcie1_phy = {
.master = &dra7xx_l4_cfg_hwmod,
@@ -2751,6 +2804,8 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
&dra7xx_l4_cfg__mpu,
&dra7xx_l4_cfg__ocp2scp1,
&dra7xx_l4_cfg__ocp2scp3,
+ &dra7xx_l4_cfg__pcie1,
+ &dra7xx_l4_cfg__pcie2,
&dra7xx_l4_cfg__pcie1_phy,
&dra7xx_l4_cfg__pcie2_phy,
&dra7xx_l3_main_1__qspi,
--
1.7.9.5
next prev parent reply other threads:[~2014-05-06 13:33 UTC|newest]
Thread overview: 66+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-06 13:33 [PATCH 00/17] PCIe support for DRA7xx Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 01/17] phy: phy-omap-pipe3: Add support for PCIe PHY Kishon Vijay Abraham I
2014-05-14 12:57 ` Roger Quadros
[not found] ` <1399383244-14556-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2014-05-06 13:33 ` [PATCH 02/17] phy: omap-control: add external clock " Kishon Vijay Abraham I
[not found] ` <1399383244-14556-3-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2014-05-14 13:02 ` Roger Quadros
2014-05-06 13:33 ` [PATCH 03/17] phy: ti-pipe3: " Kishon Vijay Abraham I
2014-05-14 13:16 ` Roger Quadros
2014-05-14 15:19 ` Kishon Vijay Abraham I
2014-05-14 15:34 ` Nishanth Menon
2014-05-15 9:15 ` Kishon Vijay Abraham I
2014-05-15 9:25 ` Roger Quadros
2014-05-15 11:46 ` Nishanth Menon
2014-05-15 11:59 ` Kishon Vijay Abraham I
2014-05-15 12:12 ` Nishanth Menon
2014-05-15 12:18 ` Kishon Vijay Abraham I
2014-05-15 12:33 ` Nishanth Menon
2014-05-15 12:42 ` Kishon Vijay Abraham I
2014-05-27 6:11 ` Kishon Vijay Abraham I
2014-05-28 1:54 ` Mike Turquette
2014-05-28 15:52 ` Nishanth Menon
2014-05-06 13:33 ` [PATCH 07/17] ARM: dts: DRA7: Add divider table to optfclk_pciephy_div clock Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 04/17] phy: pipe3: insert delay to enumerate in GEN2 mode Kishon Vijay Abraham I
2014-05-14 13:20 ` Roger Quadros
2014-05-06 13:33 ` [PATCH 05/17] pci: host: pcie-dra7xx: add support for pcie-dra7xx controller Kishon Vijay Abraham I
2014-05-06 13:44 ` Marek Vasut
[not found] ` <201405061544.28738.marex-ynQEQJNshbs@public.gmane.org>
2014-05-07 8:21 ` Kishon Vijay Abraham I
2014-05-09 9:43 ` Pavel Machek
[not found] ` <1399383244-14556-6-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2014-05-06 13:54 ` Arnd Bergmann
2014-05-07 8:44 ` Kishon Vijay Abraham I
2014-05-07 9:30 ` Arnd Bergmann
2014-05-09 11:29 ` Kishon Vijay Abraham I
2014-05-06 16:35 ` Jason Gunthorpe
2014-05-07 9:22 ` Kishon Vijay Abraham I
2014-05-07 9:25 ` Arnd Bergmann
2014-05-08 8:56 ` Jingoo Han
2014-05-08 9:16 ` Arnd Bergmann
2014-05-06 13:33 ` [PATCH 06/17] pci: host: pcie-designware: Use *base-mask* for configuring the iATU Kishon Vijay Abraham I
2014-05-06 13:59 ` Arnd Bergmann
2014-05-08 9:05 ` Jingoo Han
2014-05-08 9:18 ` Arnd Bergmann
2014-05-09 11:50 ` Kishon Vijay Abraham I
2014-05-12 1:44 ` Jingoo Han
2014-05-13 12:31 ` Kishon Vijay Abraham I
[not found] ` <537210BF.2050100-l0cyMroinI0@public.gmane.org>
2014-05-13 12:47 ` Arnd Bergmann
2014-05-13 13:26 ` Kishon Vijay Abraham I
[not found] ` <53721D7F.9070200-l0cyMroinI0@public.gmane.org>
2014-05-13 13:27 ` Arnd Bergmann
2014-05-13 13:34 ` Arnd Bergmann
2014-05-14 5:44 ` Kishon Vijay Abraham I
2014-05-14 12:45 ` Arnd Bergmann
2014-05-14 15:04 ` Kishon Vijay Abraham I
2014-05-16 9:00 ` Kishon Vijay Abraham I
2014-05-19 12:45 ` Arnd Bergmann
2014-05-06 13:33 ` [PATCH 08/17] ARM: dts: DRA7: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 09/17] arm: dra7xx: Add hwmod data for pcie1 phy and pcie2 phy Kishon Vijay Abraham I
2014-05-06 13:33 ` Kishon Vijay Abraham I [this message]
2014-05-06 13:33 ` [PATCH 11/17] ARM: dts: dra7xx-clocks: Add missing 32khz clocks used for PHY Kishon Vijay Abraham I
[not found] ` <1399383244-14556-12-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2014-05-14 13:23 ` Roger Quadros
2014-05-14 15:19 ` Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 12/17] ARM: dts: dra7: Add dt data for PCIe PHY control module Kishon Vijay Abraham I
2014-05-06 13:33 ` [PATCH 13/17] ARM: dts: dra7: Add dt data for PCIe PHY Kishon Vijay Abraham I
2014-05-06 13:34 ` [PATCH 14/17] ARM: dts: dra7: Add dt data for PCIe controller Kishon Vijay Abraham I
2014-05-06 13:34 ` [PATCH 15/17] ARM: OMAP: Enable PCI for DRA7 Kishon Vijay Abraham I
2014-05-06 13:34 ` [TEMP PATCH 16/17] pci: host: pcie-dra7xx: use reset framework APIs to reset PCIe Kishon Vijay Abraham I
2014-05-06 13:41 ` Dan Murphy
2014-05-06 13:34 ` [TEMP PATCH 17/17] ARM: dts: dra7: Add *resets* property for PCIe dt node Kishon Vijay Abraham I
2014-05-06 13:40 ` Dan Murphy
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399383244-14556-11-git-send-email-kishon@ti.com \
--to=kishon@ti.com \
--cc=balajitk@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rogerq@ti.com \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).