From: Sebastian Reichel <sre@kernel.org>
To: Sebastian Reichel <sre@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Shubhrajyoti Datta <omaplinuxkernel@gmail.com>,
Carlos Chinea <cch.devel@gmail.com>
Cc: "Tony Lindgren" <tony@atomide.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Pawel Moll" <pawel.moll@arm.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Kumar Gala" <galak@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-omap@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>,
"Ивайло Димитров" <freemangordon@abv.bg>,
"Joni Lapilainen" <joni.lapilainen@gmail.com>,
"Aaro Koskinen" <aaro.koskinen@iki.fi>,
"Pavel Machek" <pavel@ucw.cz>
Subject: [PATCHv5 09/10] DTS: ARM: OMAP3-N900: Add SSI support
Date: Sat, 10 May 2014 18:37:49 +0200 [thread overview]
Message-ID: <1399739870-13526-10-git-send-email-sre@kernel.org> (raw)
In-Reply-To: <1399739870-13526-1-git-send-email-sre@kernel.org>
Add SSI device tree data for OMAP3 and Nokia N900.
Signed-off-by: Sebastian Reichel <sre@kernel.org>
Reviewed-by: Pavel Machek <pavel@ucw.cz>
Tested-By: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>
---
arch/arm/boot/dts/omap3-n900.dts | 24 +++++++++++++++++++++
arch/arm/boot/dts/omap3.dtsi | 45 ++++++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/omap34xx.dtsi | 11 ++++++++++
arch/arm/boot/dts/omap36xx.dtsi | 11 ++++++++++
4 files changed, 91 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-n900.dts b/arch/arm/boot/dts/omap3-n900.dts
index 1a57b61..ef8b241 100644
--- a/arch/arm/boot/dts/omap3-n900.dts
+++ b/arch/arm/boot/dts/omap3-n900.dts
@@ -173,6 +173,19 @@
0x0da (PIN_OUTPUT | MUX_MODE1) /* dss_data23.sdi_clkn */
>;
};
+
+ ssi_pins: pinmux_ssi {
+ pinctrl-single,pins = <
+ 0x150 (PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
+ 0x14e (PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
+ 0x152 (PIN_INPUT | WAKEUP_EN | MUX_MODE4) /* ssi1_wake_tx (cawake) */
+ 0x14c (PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
+ 0x154 (PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
+ 0x156 (PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
+ 0x158 (PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
+ 0x15a (PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
+ >;
+ };
};
&i2c1 {
@@ -662,3 +675,14 @@
};
};
};
+
+&ssi_port1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ssi_pins>;
+
+ ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
+};
+
+&ssi_port2 {
+ status = "disabled";
+};
\ No newline at end of file
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index acb9019..b8cd2d7 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -757,6 +757,51 @@
clock-names = "fck";
};
};
+
+ ssi: ssi-controller@48058000 {
+ compatible = "ti,omap3-ssi";
+ ti,hwmods = "ssi";
+
+ status = "disabled";
+
+ reg = <0x48058000 0x1000>,
+ <0x48059000 0x1000>;
+ reg-names = "sys",
+ "gdd";
+
+ interrupts = <71>;
+ interrupt-names = "gdd_mpu";
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ ssi_port1: ssi-port@4805a000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805a000 0x800>,
+ <0x4805a800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <67>,
+ <68>;
+ };
+
+ ssi_port2: ssi-port@4805b000 {
+ compatible = "ti,omap3-ssi-port";
+
+ reg = <0x4805b000 0x800>,
+ <0x4805b800 0x800>;
+ reg-names = "tx",
+ "rx";
+
+ interrupt-parent = <&intc>;
+ interrupts = <69>,
+ <70>;
+ };
+ };
};
};
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 2e92360..3819c1e 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -40,6 +40,17 @@
};
};
+&ssi {
+ status = "ok";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 22cf464..541704a 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -78,6 +78,17 @@
clock-names = "fck", "tv_dac_clk";
};
+&ssi {
+ status = "ok";
+
+ clocks = <&ssi_ssr_fck>,
+ <&ssi_sst_fck>,
+ <&ssi_ick>;
+ clock-names = "ssi_ssr_fck",
+ "ssi_sst_fck",
+ "ssi_ick";
+};
+
/include/ "omap34xx-omap36xx-clocks.dtsi"
/include/ "omap36xx-omap3430es2plus-clocks.dtsi"
/include/ "omap36xx-am35xx-omap3430es2plus-clocks.dtsi"
--
2.0.0.rc0
next prev parent reply other threads:[~2014-05-10 16:37 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-10 16:37 [PATCHv5 00/10] OMAP SSI driver / N900 modem support Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 01/10] HSI: method to unregister clients from an hsi port Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 02/10] HSI: Add channel resource support to HSI clients Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 03/10] HSI: export method to (un)register clients Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 04/10] HSI: Add common DT binding for HSI client devices Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 05/10] HSI: Introduce OMAP SSI driver Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 06/10] Documentation: DT: omap-ssi binding documentation Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 07/10] HSI: Introduce driver for SSI Protocol Sebastian Reichel
2014-05-10 16:37 ` [PATCHv5 08/10] HSI: Introduce Nokia N900 modem driver Sebastian Reichel
2014-05-10 16:37 ` Sebastian Reichel [this message]
2014-05-14 21:55 ` [PATCHv5 09/10] DTS: ARM: OMAP3-N900: Add SSI support Tony Lindgren
2014-05-20 0:35 ` Tony Lindgren
2014-05-21 18:25 ` Sebastian Reichel
2014-05-21 18:43 ` Tony Lindgren
2014-05-21 19:45 ` Tony Lindgren
2014-05-21 21:50 ` Sebastian Reichel
2014-05-21 22:08 ` Tony Lindgren
2014-05-22 0:05 ` Sebastian Reichel
[not found] ` <20140522000558.GC29118-SfvFxonMDyemK9LvCR3Hrw@public.gmane.org>
2014-05-27 20:35 ` Tony Lindgren
2014-05-27 20:47 ` Sebastian Reichel
[not found] ` <20140521184319.GL17417-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2014-05-21 20:09 ` Sebastian Reichel
2014-05-21 21:09 ` Tony Lindgren
2014-05-10 16:37 ` [PATCHv5 10/10] DTS: ARM: OMAP3-N900: Add modem support Sebastian Reichel
2014-05-14 21:55 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399739870-13526-10-git-send-email-sre@kernel.org \
--to=sre@kernel.org \
--cc=aaro.koskinen@iki.fi \
--cc=cch.devel@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=freemangordon@abv.bg \
--cc=galak@codeaurora.org \
--cc=joni.lapilainen@gmail.com \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=omaplinuxkernel@gmail.com \
--cc=pali.rohar@gmail.com \
--cc=pavel@ucw.cz \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).