From: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
To: Chris Ball <chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org>,
Ulf Hansson <ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Maxime Ripard
<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Cc: "David Lanzendörfer"
<david.lanzendoerfer-Z7Kmv9EsliU@public.gmane.org>,
linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
devicetree <devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org>,
linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
"Hans de Goede"
<hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v12 3/6] ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes
Date: Sun, 11 May 2014 09:46:54 +0200 [thread overview]
Message-ID: <1399794417-9291-4-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1399794417-9291-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Hans de Goede <hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/sun4i-a10-a1000.dts | 1 +
arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 1 +
arch/arm/boot/dts/sun4i-a10-hackberry.dts | 1 +
arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 1 +
arch/arm/boot/dts/sun4i-a10-mini-xplus.dts | 1 +
arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 1 +
arch/arm/boot/dts/sun4i-a10-pcduino.dts | 1 +
7 files changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts
index 93af306..0b97c07 100644
--- a/arch/arm/boot/dts/sun4i-a10-a1000.dts
+++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts
@@ -39,6 +39,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
index 8581385..c200eac 100644
--- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
+++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts
@@ -37,6 +37,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
index 9dc7b1c..547fadc 100644
--- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts
+++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts
@@ -39,6 +39,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
index 297b8f6..f13723e 100644
--- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
+++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
@@ -27,6 +27,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
index b7a4218..c01cea5 100644
--- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
+++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts
@@ -23,6 +23,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 4b7fd04..d46a7db 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -36,6 +36,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
index 4d9c3cd..fb03bcc 100644
--- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts
+++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts
@@ -37,6 +37,7 @@
mmc0: mmc@01c0f000 {
pinctrl-names = "default";
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 1 0>; /* PH1 */
cd-inverted;
--
1.9.0
next prev parent reply other threads:[~2014-05-11 7:46 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-11 7:46 [PATCH v12 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Hans de Goede
[not found] ` <1399794417-9291-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-05-11 7:46 ` [PATCH v12 1/6] " Hans de Goede
[not found] ` <1399794417-9291-2-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-05-12 9:15 ` Ulf Hansson
[not found] ` <CAPDyKFrYeBdB20qhmkcUf5ykw=SbBo6VUPXd=By9dNOvTnvFww-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-12 11:20 ` Hans de Goede
[not found] ` <5370AE98.9050808-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org>
2014-05-12 11:34 ` Ulf Hansson
[not found] ` <CAPDyKFqTT17L23iiF2oXj+bmJruT8_qQBecXbR9iCUKo++KDgQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-12 11:40 ` Hans de Goede
2014-05-11 7:46 ` [PATCH v12 2/6] ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi Hans de Goede
2014-05-11 7:46 ` Hans de Goede [this message]
2014-05-11 7:46 ` [PATCH v12 4/6] ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes Hans de Goede
2014-05-11 7:46 ` [PATCH v12 5/6] ARM: dts: sun6i: Add reg_vcc3v3 to sun6i " Hans de Goede
2014-05-11 7:46 ` [PATCH v12 6/6] ARM: dts: sun7i: Add reg_vcc3v3 to sun7i " Hans de Goede
2014-05-11 17:08 ` [PATCH v12 0/6] ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399794417-9291-4-git-send-email-hdegoede@redhat.com \
--to=hdegoede-h+wxahxf7alqt0dzr+alfa@public.gmane.org \
--cc=chris-OsFVWbfNK3isTnJN9+BGXg@public.gmane.org \
--cc=david.lanzendoerfer-Z7Kmv9EsliU@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
--cc=ulf.hansson-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).