From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v3 1/5] ARM: dts: enable hdmi for exynos5250 based snow board
Date: Mon, 12 May 2014 15:54:04 +0530 [thread overview]
Message-ID: <1399890248-27409-2-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1399890248-27409-1-git-send-email-rahul.sharma@samsung.com>
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable support for HDMI for exynos5250 based Snow board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5250-cros-common.dtsi | 6 +++++-
arch/arm/boot/dts/exynos5250-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos5250-snow.dts | 7 +++++++
3 files changed, 19 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
index 2c1560d..89ac90f 100644
--- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi
+++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi
@@ -240,7 +240,7 @@
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- hdmiphy@38 {
+ hdmiphy: hdmiphy@38 {
compatible = "samsung,exynos4212-hdmiphy";
reg = <0x38>;
};
@@ -304,6 +304,10 @@
hdmi {
hpd-gpio = <&gpx3 7 0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
};
gpio-keys {
diff --git a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
index 9a49e68..da3ae66 100644
--- a/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5250-pinctrl.dtsi
@@ -560,6 +560,13 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@13400000 {
diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts
index 1ce1088..696850a 100644
--- a/arch/arm/boot/dts/exynos5250-snow.dts
+++ b/arch/arm/boot/dts/exynos5250-snow.dts
@@ -206,4 +206,11 @@
clock-frequency = <24000000>;
};
};
+
+ hdmi {
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ };
};
--
1.7.9.5
next prev parent reply other threads:[~2014-05-12 10:24 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 10:24 [PATCH v3 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-12 10:24 ` Rahul Sharma [this message]
2014-05-12 10:24 ` [PATCH v3 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-12 10:24 ` [PATCH v3 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-12 10:24 ` [PATCH v3 4/5] ARM: dts: remove chip specific hdmi hpd pin from board Rahul Sharma
2014-05-12 10:24 ` [PATCH v3 5/5] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-12 10:52 ` Arun Kumar K
2014-05-12 10:53 ` Rahul Sharma
2014-05-12 10:58 ` [PATCH v3 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399890248-27409-2-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).