From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board
Date: Wed, 14 May 2014 08:16:00 +0530 [thread overview]
Message-ID: <1400035562-16832-4-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400035562-16832-1-git-send-email-rahul.sharma@samsung.com>
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable hdmi for exynos5420 based peach-pit board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 19 +++++++++++++++++++
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos5420.dtsi | 5 +++++
3 files changed, 31 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index fae33dd..8248255 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -137,6 +137,25 @@
};
};
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ reg = <0x50>;
+ };
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ ddc = <&i2c_2>;
+};
+
/*
* Use longest HW watchdog in SoC (32 seconds) since the hardware
* watchdog provides no debugging information (compared to soft/hard
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index ba686e4..fc17797 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -66,6 +66,13 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
pinctrl@13410000 {
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 016992c..df4422c 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -648,9 +648,14 @@
<&clock CLK_MOUT_HDMI>;
clock-names = "hdmi", "sclk_hdmi", "sclk_pixel",
"sclk_hdmiphy", "mout_hdmi";
+ phy = <&hdmiphy>;
status = "disabled";
};
+ hdmiphy: hdmiphy@145D0000 {
+ reg = <0x145D0000 0x20>;
+ };
+
mixer: mixer@14450000 {
compatible = "samsung,exynos5420-mixer";
reg = <0x14450000 0x10000>;
--
1.7.9.5
next prev parent reply other threads:[~2014-05-14 2:46 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-14 2:45 [PATCH v4 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-14 2:45 ` [PATCH v4 1/5] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-14 19:41 ` Tomasz Figa
2014-05-15 5:22 ` Rahul Sharma
2014-05-14 2:45 ` [PATCH v4 2/5] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-14 19:44 ` Tomasz Figa
2014-05-15 5:25 ` Rahul Sharma
2014-05-14 2:46 ` Rahul Sharma [this message]
2014-05-14 19:50 ` [PATCH v4 3/5] ARM: dts: enable hdmi for exynos5420 based peach-pit board Tomasz Figa
2014-05-15 5:46 ` Rahul Sharma
2014-05-14 2:46 ` [PATCH v4 4/5] ARM: dts: remove chip specific hdmi hpd pin from board Rahul Sharma
2014-05-14 18:45 ` Kukjin Kim
2014-05-14 19:23 ` Rahul Sharma
2014-05-14 19:51 ` Tomasz Figa
2014-05-15 5:47 ` Rahul Sharma
2014-05-14 2:46 ` [PATCH v4 5/5] ARM: dts: enable hdmi for exynos5800 based peach-pi board Rahul Sharma
2014-05-14 19:56 ` Tomasz Figa
2014-05-14 19:57 ` Tomasz Figa
2014-05-15 8:27 ` Rahul Sharma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400035562-16832-4-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).