From mboxrd@z Thu Jan 1 00:00:00 1970 From: Andrew Bresticker Subject: [RFC PATCH 10/10] ARM: tegra124: Enable XHCI on Venice2 Date: Wed, 14 May 2014 17:33:06 -0700 Message-ID: <1400113986-339-11-git-send-email-abrestic@chromium.org> References: <1400113986-339-1-git-send-email-abrestic@chromium.org> Return-path: In-Reply-To: <1400113986-339-1-git-send-email-abrestic-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org> Sender: linux-usb-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Stephen Warren , Thierry Reding , Russell King , Peter De Schrijver , Prashant Gaikwad , Mike Turquette , Kishon Vijay Abraham I , Greg Kroah-Hartman , Mathias Nyman , Grant Likely , Randy Dunlap , Andrew Bresticker List-Id: devicetree@vger.kernel.org Enable the XHCI host controller and XUSB PHY on Venice2. All three USB2.0 ports are owned by the XHCI controller and the two SuperSpeed ports are mapped to the external USB2.0 ports. Signed-off-by: Andrew Bresticker --- arch/arm/boot/dts/tegra124-venice2.dts | 46 ++++++++++++++-------------------- 1 file changed, 19 insertions(+), 27 deletions(-) diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index f0bb842..dcfc0c7 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -940,6 +940,25 @@ nvidia,sys-clock-req-active-high; }; + usb@0,70090000 { + status = "okay"; + s1p05v-supply = <&vdd_1v05_run>; + s3p3v-supply = <&vdd_3v3_lp0>; + s1p8v-supply = <&vddio_1v8>; + }; + + phy@0,7009f000 { + status = "okay"; + nvidia,ss-pads = <0x3>; + nvidia,hsic-pads = <0x0>; + nvidia,utmi-pads = <0x7>; + nvidia,ss-port0-map = <0>; + nvidia,ss-port1-map = <2>; + vbus1-supply = <&vdd_usb1_vbus>; + vbus2-supply = <&vdd_run_cam>; + vbus3-supply = <&vdd_usb3_vbus>; + }; + sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -960,33 +979,6 @@ }; }; - usb@0,7d000000 { - status = "okay"; - }; - - usb-phy@0,7d000000 { - status = "okay"; - vbus-supply = <&vdd_usb1_vbus>; - }; - - usb@0,7d004000 { - status = "okay"; - }; - - usb-phy@0,7d004000 { - status = "okay"; - vbus-supply = <&vdd_run_cam>; - }; - - usb@0,7d008000 { - status = "okay"; - }; - - usb-phy@0,7d008000 { - status = "okay"; - vbus-supply = <&vdd_usb3_vbus>; - };