From: Rahul Sharma <rahul.sharma@samsung.com>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
tomasz.figa@gmail.com, joshi@samsung.com, r.sh.open@gmail.com,
Rahul Sharma <rahul.sharma@samsung.com>
Subject: [PATCH v5 4/4] ARM: dts: enable hdmi for exynos5800 based peach-pi board
Date: Thu, 15 May 2014 20:34:24 +0530 [thread overview]
Message-ID: <1400166264-3428-5-git-send-email-rahul.sharma@samsung.com> (raw)
In-Reply-To: <1400166264-3428-1-git-send-email-rahul.sharma@samsung.com>
From: Rahul Sharma <Rahul.Sharma@samsung.com>
Enable hdmi for peach-pi board.
Signed-off-by: Rahul Sharma <Rahul.Sharma@samsung.com>
---
arch/arm/boot/dts/exynos5800-peach-pi.dts | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 742655b..5a44871 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -72,6 +72,13 @@
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
};
&rtc {
@@ -134,6 +141,21 @@
};
};
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+};
+
+&hdmi {
+ status = "okay";
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ ddc = <&i2c_2>;
+};
+
/*
* Use longest HW watchdog in SoC (32 seconds) since the hardware
* watchdog provides no debugging information (compared to soft/hard
--
1.7.9.5
next prev parent reply other threads:[~2014-05-15 15:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-15 15:04 [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 1/4] ARM: dts: enable hdmi for exynos5250 based snow board Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 2/4] ARM: dts: change to correct compatible string for exynos5420 hdmi Rahul Sharma
2014-05-15 15:04 ` [PATCH v5 3/4] ARM: dts: enable hdmi for exynos5420 based peach-pit board Rahul Sharma
2014-05-15 15:04 ` Rahul Sharma [this message]
2014-05-15 19:25 ` [PATCH v5 0/5] ARM: dts: enable hdmi for exynos5 based peach and snow boards Tomasz Figa
2014-05-15 20:02 ` Kukjin Kim
2014-05-15 20:28 ` Kukjin Kim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400166264-3428-5-git-send-email-rahul.sharma@samsung.com \
--to=rahul.sharma@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=inki.dae@samsung.com \
--cc=joshi@samsung.com \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=r.sh.open@gmail.com \
--cc=tomasz.figa@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).