From: Tushar Behera <tushar.behera@linaro.org>
To: alsa-devel@alsa-project.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org
Cc: tiwai@suse.de, perex@perex.cz, broonie@kernel.org,
dianders@chromium.org, jerry.wong@maximintegrated.com
Subject: [PATCH 1/2] ASoC: max98090: Add master clock handling
Date: Thu, 22 May 2014 14:47:07 +0530 [thread overview]
Message-ID: <1400750228-13750-2-git-send-email-tushar.behera@linaro.org> (raw)
In-Reply-To: <1400750228-13750-1-git-send-email-tushar.behera@linaro.org>
If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.
Documentation has been updated to reflect the change.
Signed-off-by: Tushar Behera <tushar.behera@linaro.org>
---
.../devicetree/bindings/sound/max98090.txt | 6 ++++++
sound/soc/codecs/max98090.c | 13 +++++++++++++
sound/soc/codecs/max98090.h | 1 +
3 files changed, 20 insertions(+)
diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt
index e4c8b36..a5e63fa 100644
--- a/Documentation/devicetree/bindings/sound/max98090.txt
+++ b/Documentation/devicetree/bindings/sound/max98090.txt
@@ -10,6 +10,12 @@ Required properties:
- interrupts : The CODEC's interrupt output.
+Optional properties:
+
+- clocks: The phandle of the master clock to the CODEC
+
+- clock-names: Should be "mclk"
+
Pins on the device (for linking into audio routes):
* MIC1
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c
index 9b76f5a..41c61eb 100644
--- a/sound/soc/codecs/max98090.c
+++ b/sound/soc/codecs/max98090.c
@@ -17,6 +17,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/acpi.h>
+#include <linux/clk.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
@@ -1929,6 +1930,11 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai,
if (freq == max98090->sysclk)
return 0;
+ if (!IS_ERR(max98090->mclk)) {
+ freq = clk_round_rate(max98090->mclk, freq);
+ clk_set_rate(max98090->mclk, freq);
+ }
+
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 40MHz)..
@@ -2213,6 +2219,10 @@ static int max98090_probe(struct snd_soc_codec *codec)
dev_dbg(codec->dev, "max98090_probe\n");
+ max98090->mclk = devm_clk_get(codec->dev, "mclk");
+ if (!IS_ERR(max98090->mclk))
+ clk_prepare_enable(max98090->mclk);
+
max98090->codec = codec;
/* Reset the codec, the DSP core, and disable all interrupts */
@@ -2308,6 +2318,9 @@ static int max98090_remove(struct snd_soc_codec *codec)
cancel_delayed_work_sync(&max98090->jack_work);
+ if (!IS_ERR(max98090->mclk))
+ clk_disable_unprepare(max98090->mclk);
+
return 0;
}
diff --git a/sound/soc/codecs/max98090.h b/sound/soc/codecs/max98090.h
index 5a3c8d0..cf1b606 100644
--- a/sound/soc/codecs/max98090.h
+++ b/sound/soc/codecs/max98090.h
@@ -1524,6 +1524,7 @@ struct max98090_priv {
struct snd_soc_codec *codec;
enum max98090_type devtype;
struct max98090_pdata *pdata;
+ struct clk *mclk;
unsigned int sysclk;
unsigned int bclk;
unsigned int lrclk;
--
1.7.9.5
next prev parent reply other threads:[~2014-05-22 9:17 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-22 9:17 [PATCH 0/2] ASoC: max98090/max98095: Add master clock handing Tushar Behera
2014-05-22 9:17 ` Tushar Behera [this message]
2014-05-22 10:30 ` [PATCH 1/2] ASoC: max98090: Add master clock handling Mark Brown
[not found] ` <20140522103039.GD12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-05-23 5:35 ` Tushar Behera
[not found] ` <CAHbNUh2QHv8n7Y19qfO7BagX5AWe0i17MjDvr7yOpHf6YNGW4A-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-23 11:14 ` Mark Brown
[not found] ` <20140523111446.GA12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-05-23 11:36 ` Tushar Behera
[not found] ` <CAHbNUh152xgyVxcCHiv0M6PLw8DE7KZ990WG7uRWWFBc8sPWRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-05-23 11:41 ` Mark Brown
[not found] ` <20140523114113.GE12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-05-23 12:02 ` Tushar Behera
2014-05-22 15:51 ` Stephen Warren
[not found] ` <537E1D0A.6020303-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-05-22 17:34 ` Mark Brown
[not found] ` <20140522173403.GL12304-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-05-22 17:50 ` Stephen Warren
[not found] ` <537E38FF.9000407-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
2014-05-22 18:19 ` Mark Brown
2014-05-22 22:24 ` Stephen Warren
2014-05-22 23:36 ` Mark Brown
2014-05-22 9:17 ` [PATCH 2/2] ASoC: max98095: " Tushar Behera
2014-05-22 10:31 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400750228-13750-2-git-send-email-tushar.behera@linaro.org \
--to=tushar.behera@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=jerry.wong@maximintegrated.com \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).