From mboxrd@z Thu Jan 1 00:00:00 1970 From: Georgi Djakov Subject: [PATCH v2 4/4] ARM: debug: qcom: add UART addresses to Kconfig help Date: Fri, 23 May 2014 18:12:32 +0300 Message-ID: <1400857952-6963-5-git-send-email-gdjakov@mm-sol.com> References: <1400857952-6963-1-git-send-email-gdjakov@mm-sol.com> Return-path: In-Reply-To: <1400857952-6963-1-git-send-email-gdjakov@mm-sol.com> Sender: linux-kernel-owner@vger.kernel.org To: linux@arm.linux.org.uk, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, sboyd@codeaurora.org, rvaswani@codeaurora.org, davidb@codeaurora.org Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, Georgi Djakov List-Id: devicetree@vger.kernel.org Add information about the APQ8084 debug UART physical and virtual addresses in the DEBUG_QCOM_UARTDM Kconfig help section. Requires: https://lkml.org/lkml/2014/4/14/312 Signed-off-by: Georgi Djakov --- arch/arm/Kconfig.debug | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 40ee328..e71723d 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -376,6 +376,7 @@ choice their output to the serial port on Qualcomm devices. ARCH DEBUG_UART_PHYS DEBUG_UART_BASE + APQ8084 0xf995e000 0xfa75e000 MSM8X60 0x19c40000 0xf0040000 MSM8960 0x16440000 0xf0040000 MSM8974 0xf991e000 0xfa71e000 -- 1.7.9.5