From: Iyappan Subramanian <isubramanian@apm.com>
To: davem@davemloft.net, netdev@vger.kernel.org, devicetree@vger.kernel.org
Cc: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, jcm@redhat.com,
patches@apm.com, Iyappan Subramanian <isubramanian@apm.com>,
Ravi Patel <rapatel@apm.com>, Keyur Chudgar <kchudgar@apm.com>
Subject: [PATCH v5 0/4] net: Add APM X-Gene SoC Ethernet driver support
Date: Mon, 2 Jun 2014 12:39:10 -0700 [thread overview]
Message-ID: <1401737954-26152-1-git-send-email-isubramanian@apm.com> (raw)
Adding APM X-Gene SoC Ethernet driver.
v5: Address comments from v4 review
* Documentation: Added phy-handle, reg-names and changed mdio part
* dtb: Added reg-names supplemental property
* changed platform_get_resource to platform_get_resource_byname
* added separate tx/rx set_desc/get_desc functions to do raw_write/raw_read
* removed set_desc/get_desc table lookup logic
* added error handling logic based on per packet descriptor bits
* added software managed Rx packet and error counters
* added busy wait for register read/writes
* changed mdio_bus->id to avoid conflict
* fixed mdio_bus leak in case of mdio_config error
* changed phy reg hard coded value to MII_BMSR
* changed phy addr hard coded value to phy_device->addr
* added paranthesis around macro arguments
* converted helper macros to inline functions
* changed use of goto's only to common work such as cleanup
v4: Address comments from v3 review
* MAINTAINERS: changed status to supported
* Kconfig: made default to no
* changed to bool data type wherever applicable
* cleaned up single bit set and masking code
* removed statistics counters masking
* removed unnecessary OOM message printing
* fixed dma_map_single and dma_unmap_single size parameter
* changed set bits macro body using new set_bits function
v3: Address comments from v2 review
* cleaned up set_desc and get_desc functions
* added dtb mdio node and phy-handle subnode
* renamed dtb phy-mode to phy-connection-type
* added of_phy_connect call to connec to PHY
* added empty line after last local variable declaration
* removed type casting when not required
* removed inline keyword from source files
* removed CONFIG_CPU_BIG_ENDIAN ifdef
v2
* Completely redesigned ethernet driver
* Added support to work with big endian kernel
* Renamed dtb phyid entry to phy_addr
* Changed dtb local-mac-address entry to byte string format
* Renamed dtb eth8clk entry to menetclk
v1
* Initial version
Signed-off-by: Iyappan Subramanian <isubramanian@apm.com>
Signed-off-by: Ravi Patel <rapatel@apm.com>
Signed-off-by: Keyur Chudgar <kchudgar@apm.com>
---
*** BLURB HERE ***
Iyappan Subramanian (4):
MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver
Documentation: dts: Add bindings for APM X-Gene SoC ethernet driver
dts: Add bindings for APM X-Gene SoC ethernet driver
drivers: net: Add APM X-Gene SoC ethernet driver support.
.../devicetree/bindings/net/apm-xgene-enet.txt | 72 ++
MAINTAINERS | 8 +
arch/arm64/boot/dts/apm-mustang.dts | 4 +
arch/arm64/boot/dts/apm-storm.dtsi | 30 +-
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/apm/Kconfig | 1 +
drivers/net/ethernet/apm/Makefile | 5 +
drivers/net/ethernet/apm/xgene/Kconfig | 9 +
drivers/net/ethernet/apm/xgene/Makefile | 6 +
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c | 901 ++++++++++++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_hw.h | 395 ++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_main.c | 959 ++++++++++++++++++++
drivers/net/ethernet/apm/xgene/xgene_enet_main.h | 131 +++
14 files changed, 2520 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/apm-xgene-enet.txt
create mode 100644 drivers/net/ethernet/apm/Kconfig
create mode 100644 drivers/net/ethernet/apm/Makefile
create mode 100644 drivers/net/ethernet/apm/xgene/Kconfig
create mode 100644 drivers/net/ethernet/apm/xgene/Makefile
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.c
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_hw.h
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.c
create mode 100644 drivers/net/ethernet/apm/xgene/xgene_enet_main.h
--
1.7.9.5
next reply other threads:[~2014-06-02 19:39 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-02 19:39 Iyappan Subramanian [this message]
2014-06-02 19:39 ` [PATCH v5 1/4] MAINTAINERS: Add entry for APM X-Gene SoC ethernet driver Iyappan Subramanian
2014-06-02 19:39 ` [PATCH v5 2/4] Documentation: dts: Add bindings " Iyappan Subramanian
2014-06-02 19:39 ` [PATCH v5 3/4] " Iyappan Subramanian
2014-06-02 19:39 ` [PATCH v5 4/4] drivers: net: Add APM X-Gene SoC ethernet driver support Iyappan Subramanian
[not found] ` <1401737954-26152-5-git-send-email-isubramanian-qTEPVZfXA3Y@public.gmane.org>
2014-06-05 7:45 ` David Miller
[not found] ` <20140605.004555.658378024391856482.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
2014-06-12 1:59 ` Iyappan Subramanian
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401737954-26152-1-git-send-email-isubramanian@apm.com \
--to=isubramanian@apm.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jcm@redhat.com \
--cc=kchudgar@apm.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=patches@apm.com \
--cc=rapatel@apm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).