From mboxrd@z Thu Jan 1 00:00:00 1970 From: Laurent Pinchart Subject: [PATCH v2] i2c: pca954x: Use the descriptor-based GPIO API Date: Tue, 3 Jun 2014 13:15:26 +0200 Message-ID: <1401794126-22244-1-git-send-email-laurent.pinchart@ideasonboard.com> References: <1401754973-13274-1-git-send-email-laurent.pinchart@ideasonboard.com> Return-path: In-Reply-To: <1401754973-13274-1-git-send-email-laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org> Sender: linux-i2c-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-i2c-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: Wolfram Sang , devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, laurent.pinchart-ryLnwIuWjnjg/C1BVhZhaw@public.gmane.org, Alexandre Courbot , Linus Walleij , Thierry Reding List-Id: devicetree@vger.kernel.org The ID-based GPIO API pushes handling of GPIO polarity to drivers. Simplify the driver by switching to the descriptor-based GPIO API. This also fixes a mismatch between the pca954x DT bindings that document a "reset-gpios" property and the driver that requests a "reset-gpio" property. Signed-off-by: Laurent Pinchart --- drivers/i2c/muxes/i2c-mux-pca954x.c | 21 +++++---------------- 1 file changed, 5 insertions(+), 16 deletions(-) diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c index 550bd36..c2c443f 100644 --- a/drivers/i2c/muxes/i2c-mux-pca954x.c +++ b/drivers/i2c/muxes/i2c-mux-pca954x.c @@ -186,7 +186,7 @@ static int pca954x_probe(struct i2c_client *client, { struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent); struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev); - struct device_node *np = client->dev.of_node; + struct gpio_desc *gpio; int num, force, class; struct pca954x *data; int ret; @@ -200,21 +200,10 @@ static int pca954x_probe(struct i2c_client *client, i2c_set_clientdata(client, data); - if (IS_ENABLED(CONFIG_OF) && np) { - enum of_gpio_flags flags; - int gpio; - - /* Get the mux out of reset if a reset GPIO is specified. */ - gpio = of_get_named_gpio_flags(np, "reset-gpio", 0, &flags); - if (gpio_is_valid(gpio)) { - ret = devm_gpio_request_one(&client->dev, gpio, - flags & OF_GPIO_ACTIVE_LOW ? - GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW, - "pca954x reset"); - if (ret < 0) - return ret; - } - } + /* Get the mux out of reset if a reset GPIO is specified. */ + gpio = devm_gpiod_get(&client->dev, "reset"); + if (!IS_ERR(gpio)) + gpiod_direction_output(gpio, 0); /* Write the mux register at addr to verify * that the mux is in fact present. This also -- Regards, Laurent Pinchart