[PATCH 07/21] gpio: use devm_irq_of_parse_and_map() where appropriate

[nyushchenko@dev.rtsoft.ru]

From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>

This avoids leak of IRQ mapping on error paths, and makes it possible
to use devm_request_irq() without facing unmap-while-handler-installed
issues.

Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
---
 drivers/gpio/gpio-adnp.c     |    4 ++--
 drivers/gpio/gpio-mcp23s08.c |    5 ++++-
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-adnp.c b/drivers/gpio/gpio-adnp.c
index b2239d6..c10e224 100644
--- a/drivers/gpio/gpio-adnp.c
+++ b/drivers/gpio/gpio-adnp.c
@@ -546,8 +546,8 @@ static int adnp_i2c_probe(struct i2c_client *client,
 	if (err < 0)
 		return err;
 
-	client->irq = irq_of_parse_and_map(np, 0);
-	if (!client->irq)
+	client->irq = devm_irq_of_parse_and_map(&client->dev, np, 0);
+	if (client->irq <= 0)
 		return -EPROBE_DEFER;
 
 	adnp = devm_kzalloc(&client->dev, sizeof(*adnp), GFP_KERNEL);
diff --git a/drivers/gpio/gpio-mcp23s08.c b/drivers/gpio/gpio-mcp23s08.c
index 3d53fd6..b6f4217 100644
--- a/drivers/gpio/gpio-mcp23s08.c
+++ b/drivers/gpio/gpio-mcp23s08.c
@@ -779,7 +779,10 @@ static int mcp230xx_probe(struct i2c_client *client,
 	if (match || !pdata) {
 		base = -1;
 		pullups = 0;
-		client->irq = irq_of_parse_and_map(client->dev.of_node, 0);
+		client->irq = devm_irq_of_parse_and_map(&client->dev,
+				client->dev.of_node, 0);
+		if (client->irq < 0)
+			return client->irq;
 	} else {
 		if (!gpio_is_valid(pdata->base)) {
 			dev_dbg(&client->dev, "invalid platform data\n");
-- 
1.7.10.4