From: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
spi-devel-general@lists.sourceforge.net,
linux-samsung-soc@vger.kernel.org
Cc: naveenkrishna.ch@gmail.com, broonie@kernel.org,
grant.likely@secretlab.ca, jaswinder.singh@linaro.org,
kgene.kim@samsung.com, cpgs@samsung.com,
devicetree@vger.kernel.org,
Javier Martinez Canillas <javier.martinez@collabora.co.uk>,
Doug Anderson <dianders@chromium.org>,
Tomasz Figa <t.figa@samsung.com>
Subject: [PATCH 3/3 v4] ARM: DTS: fix the chip select gpios definition in the SPI nodes
Date: Thu, 12 Jun 2014 18:43:41 +0530 [thread overview]
Message-ID: <1402578821-27338-3-git-send-email-ch.naveen@samsung.com> (raw)
In-Reply-To: <1402578821-27338-1-git-send-email-ch.naveen@samsung.com>
This patch replaces the "cs-gpio" from "controller-data" node
as was specified in the old binding and use the standard
"cs-gpios" property expected by the SPI core as is defined in
the new binding.
Respective changes are preposed to spi-s3c64xx.c driver.
@ http://www.spinics.net/lists/linux-samsung-soc/msg32282.html
Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Doug Anderson <dianders@chromium.org>
Cc: Tomasz Figa <t.figa@samsung.com>
---
arch/arm/boot/dts/exynos4210-smdkv310.dts | 2 +-
arch/arm/boot/dts/exynos4412-trats2.dts | 2 +-
arch/arm/boot/dts/exynos5250-smdk5250.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts
index 636d166..9191491 100644
--- a/arch/arm/boot/dts/exynos4210-smdkv310.dts
+++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts
@@ -169,6 +169,7 @@
spi_2: spi@13940000 {
status = "okay";
+ cs-gpios = <&gpc1 2 0>;
w25x80@0 {
#address-cells = <1>;
@@ -178,7 +179,6 @@
spi-max-frequency = <1000000>;
controller-data {
- cs-gpio = <&gpc1 2 0>;
samsung,spi-feedback-delay = <0>;
};
diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 8a558b7..204b0de 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -512,6 +512,7 @@
spi_1: spi@13930000 {
pinctrl-names = "default";
pinctrl-0 = <&spi1_bus>;
+ cs-gpios = <&gpb 5 0>;
status = "okay";
s5c73m3_spi: s5c73m3 {
@@ -519,7 +520,6 @@
spi-max-frequency = <50000000>;
reg = <0>;
controller-data {
- cs-gpio = <&gpb 5 0>;
samsung,spi-feedback-delay = <2>;
};
};
diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts
index a794a70..0c6433a 100644
--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts
@@ -316,6 +316,7 @@
};
spi_1: spi@12d30000 {
+ cs-gpios = <&gpa2 5 0>;
status = "okay";
w25q80bw@0 {
@@ -326,7 +327,6 @@
spi-max-frequency = <1000000>;
controller-data {
- cs-gpio = <&gpa2 5 0>;
samsung,spi-feedback-delay = <0>;
};
--
1.7.9.5
next prev parent reply other threads:[~2014-06-12 13:13 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-12 13:13 [PATCH 1/3 v4] spi: s3c64xx: fix broken "cs_gpios" usage in the driver Naveen Krishna Chatradhi
2014-06-12 13:13 ` [PATCH 2/3 v4] spi: s3c64xx: for DT platofrms always get the chipselect info from DT node Naveen Krishna Chatradhi
2014-06-12 14:06 ` Javier Martinez Canillas
2014-06-12 16:09 ` Naveen Krishna Ch
2014-06-12 23:26 ` Doug Anderson
2014-06-12 13:13 ` Naveen Krishna Chatradhi [this message]
2014-06-12 14:07 ` [PATCH 3/3 v4] ARM: DTS: fix the chip select gpios definition in the SPI nodes Javier Martinez Canillas
2014-06-12 23:14 ` Doug Anderson
[not found] ` <1402578821-27338-1-git-send-email-ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
2014-06-12 14:00 ` [PATCH 1/3 v4] spi: s3c64xx: fix broken "cs_gpios" usage in the driver Javier Martinez Canillas
2014-06-12 16:06 ` Naveen Krishna Ch
2014-06-12 23:25 ` Doug Anderson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402578821-27338-3-git-send-email-ch.naveen@samsung.com \
--to=ch.naveen@samsung.com \
--cc=broonie@kernel.org \
--cc=cpgs@samsung.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=grant.likely@secretlab.ca \
--cc=jaswinder.singh@linaro.org \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=naveenkrishna.ch@gmail.com \
--cc=spi-devel-general@lists.sourceforge.net \
--cc=t.figa@samsung.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).