From: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Shawn Guo <shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Ian Campbell
<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Subject: [PATCH 2/4] of: Add new compatibles for CODA bindings
Date: Fri, 13 Jun 2014 19:13:59 +0200 [thread overview]
Message-ID: <1402679641-868-2-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1402679641-868-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
This patch adds new compatibles using the new Chips&Media vendor
prefix "cnm" and CODA model name as well as a Freescale specific
compatible value for i.MX6DL/S.
The latter is because for some reason the i.MX6DL/S firmware
provided by Freescale differs from the i.MX6Q/D version.
Signed-off-by: Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
---
Documentation/devicetree/bindings/media/coda.txt | 11 ++++++-----
1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/coda.txt b/Documentation/devicetree/bindings/media/coda.txt
index 2865d04..f5e4d4b 100644
--- a/Documentation/devicetree/bindings/media/coda.txt
+++ b/Documentation/devicetree/bindings/media/coda.txt
@@ -5,10 +5,11 @@ Coda codec IPs are present in i.MX SoCs in various versions,
called VPU (Video Processing Unit).
Required properties:
-- compatible : should be "fsl,<chip>-src" for i.MX SoCs:
- (a) "fsl,imx27-vpu" for CodaDx6 present in i.MX27
- (b) "fsl,imx53-vpu" for CODA7541 present in i.MX53
- (c) "fsl,imx6q-vpu" for CODA960 present in i.MX6q
+- compatible : should be "fsl,<chip>-src", "cnm,coda<model>" for i.MX SoCs:
+ (a) "fsl,imx27-vpu", "cnm,codadx6" for CodaDx6 present in i.MX27
+ (b) "fsl,imx53-vpu", "cnm,coda7541" for CODA7541 present in i.MX53
+ (c) "fsl,imx6q-vpu", "cnm,coda960" for CODA960 present in i.MX6Q/D
+ (d) "fsl,imx6dl-vpu", "cnm,coda960" for CODA960 present in i.MX6DL/S
- reg: should be register base and length as documented in the
SoC reference manual
- interrupts : Should contain the VPU interrupt. For CODA960,
@@ -21,7 +22,7 @@ Required properties:
Example:
vpu: vpu@63ff4000 {
- compatible = "fsl,imx53-vpu";
+ compatible = "fsl,imx53-vpu", "cnm,coda7541";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
clocks = <&clks 63>, <&clks 63>;
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-06-13 17:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-13 17:13 [PATCH 1/4] of: Add vendor prefix for Chips&Media, Inc Philipp Zabel
2014-06-13 17:14 ` [PATCH 4/4] ARM: dts: imx6qdl: Enable CODA960 VPU Philipp Zabel
[not found] ` <1402679641-868-4-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-06-13 20:46 ` Rob Herring
[not found] ` <CAL_JsqL+o+CCRUzXaAmBJBGSxt60k_858S7wQT4TLY0kZC9jgw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-06-13 21:16 ` Philipp Zabel
2014-06-18 15:12 ` Shawn Guo
2014-07-16 8:27 ` Philipp Zabel
[not found] ` <1402679641-868-1-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2014-06-13 17:13 ` Philipp Zabel [this message]
2014-06-13 17:14 ` [PATCH 3/4] of: Add named interrupts to CODA bindings Philipp Zabel
2014-11-14 19:50 ` [PATCH 1/4] of: Add vendor prefix for Chips&Media, Inc Fabio Estevam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402679641-868-2-git-send-email-p.zabel@pengutronix.de \
--to=p.zabel-bicnvbalz9megne8c9+irq@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).