From mboxrd@z Thu Jan 1 00:00:00 1970 From: Hans de Goede Subject: [PATCH v2 4/4] brcmfmac: Fix OOB interrupt not working for BCM43362 Date: Mon, 16 Jun 2014 19:56:47 +0200 Message-ID: <1402941407-8210-5-git-send-email-hdegoede@redhat.com> References: <1402941407-8210-1-git-send-email-hdegoede@redhat.com> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Return-path: In-Reply-To: <1402941407-8210-1-git-send-email-hdegoede-H+wXaHxf7aLQT0dZR+AlfA@public.gmane.org> List-Post: , List-Help: , List-Archive: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Subscribe: , List-Unsubscribe: , To: "John W. Linville" Cc: Arend van Spriel , Chen-Yu Tsai , linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Hans de Goede List-Id: devicetree@vger.kernel.org It has taken me a long long time to get the OOB interrupt working on the AP6210 sdio wifi/bt module found on various Allwinner A20 boards. In the end I found these magic register pokes in the cubietruck kernel tree: https://github.com/cubieboard2/linux-sunxi/commit/7f08ba395617d17e7a711507503d89a50406fe7a I'm not entirely sure if this specific to the AP6210 module, or if this should be done for all BCM43362 sdio devices. Signed-off-by: Hans de Goede --- drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c index 0fc707c..58e86a5 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh.c @@ -39,7 +39,9 @@ #include #include #include +#include #include +#include "chip.h" #include "dhd_bus.h" #include "dhd_dbg.h" #include "sdio_host.h" @@ -119,6 +121,7 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) { int ret = 0; u8 data; + u32 addr, gpiocontrol; unsigned long flags; if ((sdiodev->pdata) && (sdiodev->pdata->oob_irq_supported)) { @@ -148,6 +151,19 @@ int brcmf_sdiod_intr_register(struct brcmf_sdio_dev *sdiodev) sdio_claim_host(sdiodev->func[1]); + if (sdiodev->bus_if->chip == BCM43362_CHIP_ID) { + /* assign GPIO to SDIO core */ + addr = CORE_CC_REG(SI_ENUM_BASE, gpiocontrol); + gpiocontrol = brcmf_sdiod_regrl(sdiodev, addr, &ret); + gpiocontrol |= 0x2; + brcmf_sdiod_regwl(sdiodev, addr, gpiocontrol, &ret); + + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_SELECT, 0xf, + &ret); + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_OUT, 0, &ret); + brcmf_sdiod_regwb(sdiodev, SBSDIO_GPIO_EN, 0x2, &ret); + } + /* must configure SDIO_CCCR_IENx to enable irq */ data = brcmf_sdiod_regrb(sdiodev, SDIO_CCCR_IENx, &ret); data |= 1 << SDIO_FUNC_1 | 1 << SDIO_FUNC_2 | 1; -- 2.0.0