devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sean Cross <xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
To: lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
	Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
	Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>,
	Grant Likely
	<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
	Fabio Estevam
	<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	Nicolin Chen <b42378-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: bunnie-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org,
	Sean Cross <xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v3 0/3] Add ES8328 audio codec
Date: Tue, 17 Jun 2014 17:32:49 +0800	[thread overview]
Message-ID: <1402997571-1255-1-git-send-email-xobs@kosagi.com> (raw)

This patchset adds support for the Everest Semi ES8328 audio codec.  It also
adds support for using the es8328 on IMX boards.

We write a machine driver rather than using simple-card because the machine
driver needs to support regulators for the codec itself and speaker amps,
have headphone support, and must supply an unusual frequency to the codec chip.

Changes since v2:
    - Change deemph to a bool, and update based on sample rate
    - Replace value enums with regular enums
    - Break SPI and I2C drivers into their own modules
    - Rename everest,es8328 to es8328 as the module wasn't getting detected.
      Because of this, the patch to vendor-prefixes.txt has been dropped.

Changes since v1:
    - Rename HP/Speaker to OUT1/OUT2
    - Use DAPM widgets for startup/shutdown
    - Add regulator support to machine driver

*** BLURB HERE ***

Sean Cross (2):
  ASoC: add es8328 codec driver
  ASoC: fsl: add imx-es8328 machine driver

 Documentation/devicetree/bindings/sound/es8328.txt |  18 +
 .../devicetree/bindings/sound/imx-audio-es8328.txt |  60 ++
 sound/soc/codecs/Kconfig                           |  13 +
 sound/soc/codecs/Makefile                          |   6 +
 sound/soc/codecs/es8328-i2c.c                      |  55 ++
 sound/soc/codecs/es8328-spi.c                      |  44 ++
 sound/soc/codecs/es8328.c                          | 625 +++++++++++++++++++++
 sound/soc/codecs/es8328.h                          | 313 +++++++++++
 sound/soc/fsl/Kconfig                              |  14 +
 sound/soc/fsl/Makefile                             |   2 +
 sound/soc/fsl/imx-es8328.c                         | 359 ++++++++++++
 11 files changed, 1509 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/sound/es8328.txt
 create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
 create mode 100644 sound/soc/codecs/es8328-i2c.c
 create mode 100644 sound/soc/codecs/es8328-spi.c
 create mode 100644 sound/soc/codecs/es8328.c
 create mode 100644 sound/soc/codecs/es8328.h
 create mode 100644 sound/soc/fsl/imx-es8328.c

-- 
2.0.0

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2014-06-17  9:32 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-17  9:32 Sean Cross [this message]
     [not found] ` <1402997571-1255-1-git-send-email-xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-17  9:32   ` [PATCH v3 1/2] ASoC: add es8328 codec driver Sean Cross
     [not found]     ` <1402997571-1255-2-git-send-email-xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-17 10:46       ` [alsa-devel] " Charles Keepax
     [not found]         ` <20140617104639.GD26741-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>
2014-06-17 11:36           ` Sean Cross
     [not found]             ` <53A02844.9050701-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-17 11:42               ` Lars-Peter Clausen
     [not found]                 ` <53A029A4.1020304-Qo5EllUWu/uELgA04lAiVw@public.gmane.org>
2014-06-17 11:48                   ` Varka Bhadram
2014-06-17 16:00           ` Mark Rutland
2014-06-17  9:32   ` [PATCH v3 2/2] ASoC: fsl: add imx-es8328 machine driver Sean Cross
     [not found]     ` <1402997571-1255-3-git-send-email-xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-17 16:07       ` Mark Rutland

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1402997571-1255-1-git-send-email-xobs@kosagi.com \
    --to=xobs-nxmmniax+rbqt0dzr+alfa@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=b42378-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=bunnie-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
    --cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
    --cc=perex-/Fr2/VpizcU@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=tiwai-l3A5Bk7waGM@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).