[PATCH net-next v2 0/3] Driver fir TI CC2520 Radio

[PATCH net-next v2 0/3] Driver fir TI CC2520 Radio

[Varka Bhadram]

This series adds the driver support for TI cc2520 radio.
also devicetree bindings for the driver.

changes since v1:
	- improverment in gpio setup
	- changed len pointer to len variable
	- 
Varka Bhadram (3):
  ieee802154: cc2520: adds driver for TI CC2520 radio
  ieee802154: cc2520: add driver to kernel build system
  devicetree: add devicetree bindings for cc2520 driver

 .../devicetree/bindings/net/ieee802154/cc2520.txt  |   26 +
 drivers/net/ieee802154/Kconfig                     |   11 +
 drivers/net/ieee802154/Makefile                    |    1 +
 drivers/net/ieee802154/cc2520.c                    |  968 ++++++++++++++++++++
 include/linux/spi/cc2520.h                         |   26 +
 5 files changed, 1032 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
 create mode 100644 drivers/net/ieee802154/cc2520.c
 create mode 100644 include/linux/spi/cc2520.h

-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Varka Bhadram]

Driver support:
        - Tx and Rx of IEEE-802.15.4 packets.
        - Energy Detection on channel.
        - Setting the Channel for the radio. [b/w 11 - 26 channels]
        - Start and Stop the radio.

Signed-off-by: Varka Bhadram <varkab@cdac.in>
---
 drivers/net/ieee802154/cc2520.c |  968 +++++++++++++++++++++++++++++++++++++++
 include/linux/spi/cc2520.h      |   26 ++
 2 files changed, 994 insertions(+)
 create mode 100644 drivers/net/ieee802154/cc2520.c
 create mode 100644 include/linux/spi/cc2520.h

diff --git a/drivers/net/ieee802154/cc2520.c b/drivers/net/ieee802154/cc2520.c
new file mode 100644
index 0000000..29ac8d8
--- /dev/null
+++ b/drivers/net/ieee802154/cc2520.c
@@ -0,0 +1,968 @@
+/* Driver for TI CC2520 802.15.4 Wireless-PAN Networking controller
+ *
+ * Copyright (C) 2014 Varka Bhadram <varkab@cdac.in>
+ *		      Md.Jamal Mohiuddin <mjmohiuddin@cdac.in>
+ *		      P Sowjanya <sowjanyap@cdac.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/cc2520.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+
+#include <linux/skbuff.h>
+
+#include <linux/pinctrl/consumer.h>
+
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+
+#include <net/mac802154.h>
+#include <net/wpan-phy.h>
+
+#define	SPI_COMMAND_BUFFER	3
+#define	HIGH			1
+#define	LOW			0
+#define	STATE_IDLE		0
+#define RSSI_VALID		0
+#define RSSI_OFFSET		78
+
+#define CC2520_RAM_SIZE		640
+#define CC2520_FIFO_SIZE	128
+
+#define CC2520RAM_TXFIFO	0x100,
+#define CC2520RAM_RXFIFO	0x180,
+#define CC2520RAM_IEEEADDR	0x3EA,
+#define CC2520RAM_PANID		0x3F2,
+#define CC2520RAM_SHORTADDR	0x3F4,
+
+#define CC2520_FREG_MASK	0x3F
+
+/*status byte values */
+#define	CC2520_STATUS_XOSC32M_STABLE	(1 << 7)
+#define	CC2520_STATUS_RSSI_VALID	(1 << 6)
+#define	CC2520_STATUS_TX_UNDERFLOW	(1 << 3)
+
+/*IEEE 802.15.4 defined constants (2.4 GHz logical channels) */
+#define CC2520_MINCHANNEL		11
+#define CC2520_MAXCHANNEL		26
+#define CC2520_CHANNEL_SPACING		5
+
+/*command strobes*/
+#define	CC2520_CMD_SNOP			0x00
+#define	CC2520_CMD_IBUFLD		0x02
+#define	CC2520_CMD_SIBUFEX		0x03
+#define	CC2520_CMD_SSAMPLECCA		0x04
+#define	CC2520_CMD_SRES			0x0f
+#define	CC2520_CMD_MEMORY_MASK		0x0f
+#define	CC2520_CMD_MEMORY_READ		0x10
+#define	CC2520_CMD_MEMORY_WRITE		0x20
+#define	CC2520_CMD_RXBUF		0x30
+#define	CC2520_CMD_RXBUFCP		0x38
+#define	CC2520_CMD_RXBUFMOV		0x32
+#define	CC2520_CMD_TXBUF		0x3A
+#define	CC2520_CMD_TXBUFCP		0x3E
+#define	CC2520_CMD_RANDOM		0x3C
+#define	CC2520_CMD_SXOSCON		0x40
+#define	CC2520_CMD_STXCAL		0x41
+#define	CC2520_CMD_SRXON		0x42
+#define	CC2520_CMD_STXON		0x43
+#define	CC2520_CMD_STXONCCA		0x44
+#define	CC2520_CMD_SRFOFF		0x45
+#define	CC2520_CMD_SXOSCOFF		0x46
+#define	CC2520_CMD_SFLUSHRX		0x47
+#define	CC2520_CMD_SFLUSHTX		0x48
+#define	CC2520_CMD_SACK			0x49
+#define	CC2520_CMD_SACKPEND		0x4A
+#define	CC2520_CMD_SNACK		0x4B
+#define	CC2520_CMD_SRXMASKBITSET	0x4C
+#define	CC2520_CMD_SRXMASKBITCLR	0x4D
+#define	CC2520_CMD_RXMASKAND		0x4E
+#define	CC2520_CMD_RXMASKOR		0x4F
+#define	CC2520_CMD_MEMCP		0x50
+#define	CC2520_CMD_MEMCPR		0x52
+#define	CC2520_CMD_MEMXCP		0x54
+#define	CC2520_CMD_MEMXWR		0x56
+#define	CC2520_CMD_BCLR			0x58
+#define	CC2520_CMD_BSET			0x59
+#define	CC2520_CMD_CTR_UCTR		0x60
+#define	CC2520_CMD_CBCMAC		0x64
+#define	CC2520_CMD_UCBCMAC		0x66
+#define	CC2520_CMD_CCM			0x68
+#define	CC2520_CMD_UCCM			0x6A
+#define	CC2520_CMD_ECB			0x70
+#define	CC2520_CMD_ECBO			0x72
+#define	CC2520_CMD_ECBX			0x74
+#define	CC2520_CMD_INC			0x78
+#define	CC2520_CMD_ABORT		0x7F
+#define	CC2520_CMD_REGISTER_READ	0x80
+#define	CC2520_CMD_REGISTER_WRITE	0xC0
+
+/* status registers */
+#define	CC2520_CHIPID			0x40
+#define	CC2520_VERSION			0x42
+#define	CC2520_EXTCLOCK			0x44
+#define	CC2520_MDMCTRL0			0x46
+#define	CC2520_MDMCTRL1			0x47
+#define	CC2520_FREQEST			0x48
+#define	CC2520_RXCTRL			0x4A
+#define	CC2520_FSCTRL			0x4C
+#define	CC2520_FSCAL0			0x4E
+#define	CC2520_FSCAL1			0x4F
+#define	CC2520_FSCAL2			0x50
+#define	CC2520_FSCAL3			0x51
+#define	CC2520_AGCCTRL0			0x52
+#define	CC2520_AGCCTRL1			0x53
+#define	CC2520_AGCCTRL2			0x54
+#define	CC2520_AGCCTRL3			0x55
+#define	CC2520_ADCTEST0			0x56
+#define	CC2520_ADCTEST1			0x57
+#define	CC2520_ADCTEST2			0x58
+#define	CC2520_MDMTEST0			0x5A
+#define	CC2520_MDMTEST1			0x5B
+#define CC2520_DACTEST0			0x5C
+#define CC2520_DACTEST1			0x5D
+#define CC2520_ATEST			0x5E
+#define CC2520_DACTEST2			0x5F
+#define CC2520_PTEST0			0x60
+#define CC2520_PTEST1			0x61
+#define CC2520_RESERVED			0x62
+#define CC2520_DPUBIST			0x7A
+#define CC2520_ACTBIST			0x7C
+#define CC2520_RAMBIST			0x7E
+
+/*frame registers*/
+#define CC2520_FRMFILT0			0x00
+#define CC2520_FRMFILT1			0x01
+#define CC2520_SRCMATCH			0x02
+#define CC2520_SRCSHORTEN0		0x04
+#define CC2520_SRCSHORTEN1		0x05
+#define CC2520_SRCSHORTEN2		0x06
+#define CC2520_SRCEXTEN0		0x08
+#define CC2520_SRCEXTEN1		0x09
+#define CC2520_SRCEXTEN2		0x0A
+#define CC2520_FRMCTRL0			0x0C
+#define CC2520_FRMCTRL1			0x0D
+#define CC2520_RXENABLE0		0x0E
+#define CC2520_RXENABLE1		0x0F
+#define CC2520_EXCFLAG0			0x10
+#define CC2520_EXCFLAG1			0x11
+#define CC2520_EXCFLAG2			0x12
+#define CC2520_EXCMASKA0		0x14
+#define CC2520_EXCMASKA1		0x15
+#define CC2520_EXCMASKA2		0x16
+#define CC2520_EXCMASKB0		0x18
+#define CC2520_EXCMASKB1		0x19
+#define CC2520_EXCMASKB2		0x1A
+#define CC2520_EXCBINDX0		0x1C
+#define CC2520_EXCBINDX1		0x1D
+#define CC2520_EXCBINDY0		0x1E
+#define CC2520_EXCBINDY1		0x1F
+#define CC2520_GPIOCTRL0		0x20
+#define CC2520_GPIOCTRL1		0x21
+#define CC2520_GPIOCTRL2		0x22
+#define CC2520_GPIOCTRL3		0x23
+#define CC2520_GPIOCTRL4		0x24
+#define CC2520_GPIOCTRL5		0x25
+#define CC2520_GPIOPOLARITY		0x26
+#define CC2520_GPIOCTRL			0x28
+#define CC2520_DPUCON			0x2A
+#define CC2520_DPUSTAT			0x2C
+#define CC2520_FREQCTRL			0x2E
+#define CC2520_FREQTUNE			0x2F
+#define CC2520_TXPOWER			0x30
+#define CC2520_TXCTRL			0x31
+#define CC2520_FSMSTAT0			0x32
+#define CC2520_FSMSTAT1			0x33
+#define CC2520_FIFOPCTRL		0x34
+#define CC2520_FSMCTRL			0x35
+#define CC2520_CCACTRL0			0x36
+#define CC2520_CCACTRL1			0x37
+#define CC2520_RSSI			0x38
+#define CC2520_RSSISTAT			0x39
+#define CC2520_RXFIRST			0x3C
+#define CC2520_RXFIFOCNT		0x3E
+#define CC2520_TXFIFOCNT		0x3F
+
+/* Driver private information */
+struct cc2520_private {
+	struct spi_device *spi;		/* spi device structure */
+	struct ieee802154_dev *dev;	/* Ieee802.15.4 device */
+	u8 *buf;			/* SPI TX/Rx data buffer */
+	struct mutex buffer_mutex;	/* SPI buffer mutex */
+	unsigned is_tx:1;		/* Flag for sync b/w Tx and Rx */
+	int fifo_pin;			/* FIFO GPIO pin number */
+	struct work_struct fifop_irqwork;/* Workqueue for FIFOP */
+	spinlock_t lock;		/* Spin lock */
+	struct completion tx_complete;	/* Work completion for Tx */
+};
+
+/* Generic Functions */
+static int
+cc2520_cmd_strobe(struct cc2520_private *priv, u8 cmd)
+{
+	int ret;
+	u8 status = 0xff;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer.len++] = cmd;
+	dev_vdbg(&priv->spi->dev,
+		 "command strobe buf[0] = %02x\n",
+		 priv->buf[0]);
+
+	ret = spi_sync(priv->spi, &msg);
+	if (!ret)
+		status = priv->buf[0];
+	dev_vdbg(&priv->spi->dev,
+		 "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return ret;
+}
+
+static int
+cc2520_get_status(struct cc2520_private *priv, u8 *status)
+{
+	int ret;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer.len++] = CC2520_CMD_SNOP;
+	dev_vdbg(&priv->spi->dev,
+		 "get status command buf[0] = %02x\n", priv->buf[0]);
+
+	ret = spi_sync(priv->spi, &msg);
+	if (!ret)
+		*status = priv->buf[0];
+	dev_vdbg(&priv->spi->dev,
+		 "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return ret;
+}
+
+static int
+cc2520_write_register(struct cc2520_private *priv, u8 reg, u8 value)
+{
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+
+	if (reg <= CC2520_FREG_MASK) {
+		priv->buf[xfer.len++] = CC2520_CMD_REGISTER_WRITE | reg;
+		priv->buf[xfer.len++] = value;
+	} else {
+		priv->buf[xfer.len++] = CC2520_CMD_MEMORY_WRITE;
+		priv->buf[xfer.len++] = reg;
+		priv->buf[xfer.len++] = value;
+	}
+	status = spi_sync(priv->spi, &msg);
+	if (msg.status)
+		status = msg.status;
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_read_register(struct cc2520_private *priv, u8 reg, u8 *data)
+{
+	int status;
+	struct spi_message msg;
+	struct spi_transfer xfer1 = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+
+	struct spi_transfer xfer2 = {
+		.len = 1,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer1, &msg);
+	spi_message_add_tail(&xfer2, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer1.len++] = CC2520_CMD_MEMORY_READ;
+	priv->buf[xfer1.len++] = reg;
+
+	status = spi_sync(priv->spi, &msg);
+	dev_dbg(&priv->spi->dev,
+		"spi status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_write_txfifo(struct cc2520_private *priv, u8 *data, u8 len)
+{
+	int status;
+
+	/*
+	 *length byte must include FCS even
+	 *if it is calculated in the hardware
+	 */
+	int len_byte = len + 2;
+
+	struct spi_message msg;
+
+	struct spi_transfer xfer_head = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+	struct spi_transfer xfer_len = {
+		.len = 1,
+		.tx_buf = &len_byte,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.tx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_len, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer_head.len++] = CC2520_CMD_TXBUF;
+	dev_vdbg(&priv->spi->dev,
+		 "TX_FIFO cmd buf[0] = %02x\n", priv->buf[0]);
+
+	status = spi_sync(priv->spi, &msg);
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	dev_vdbg(&priv->spi->dev, "buf[0] = %02x\n", priv->buf[0]);
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int
+cc2520_read_rxfifo(struct cc2520_private *priv, u8 *data, u8 len, u8 *lqi)
+{
+	int status;
+	struct spi_message msg;
+
+	struct spi_transfer xfer_head = {
+		.len = 0,
+		.tx_buf = priv->buf,
+		.rx_buf = priv->buf,
+	};
+	struct spi_transfer xfer_buf = {
+		.len = len,
+		.rx_buf = data,
+	};
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer_head, &msg);
+	spi_message_add_tail(&xfer_buf, &msg);
+
+	mutex_lock(&priv->buffer_mutex);
+	priv->buf[xfer_head.len++] = CC2520_CMD_RXBUF;
+
+	dev_vdbg(&priv->spi->dev, "read rxfifo buf[0] = %02x\n", priv->buf[0]);
+	dev_vdbg(&priv->spi->dev, "buf[1] = %02x\n", priv->buf[1]);
+
+	status = spi_sync(priv->spi, &msg);
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	if (msg.status)
+		status = msg.status;
+	dev_vdbg(&priv->spi->dev, "status = %d\n", status);
+	dev_vdbg(&priv->spi->dev,
+		 "return status buf[0] = %02x\n", priv->buf[0]);
+	dev_vdbg(&priv->spi->dev, "length buf[1] = %02x\n", priv->buf[1]);
+
+	*lqi = data[priv->buf[1] - 1] & 0x7f;
+
+	mutex_unlock(&priv->buffer_mutex);
+
+	return status;
+}
+
+static int cc2520_start(struct ieee802154_dev *dev)
+{
+	return cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRXON);
+}
+
+static void cc2520_stop(struct ieee802154_dev *dev)
+{
+	cc2520_cmd_strobe(dev->priv, CC2520_CMD_SRFOFF);
+}
+
+static int
+cc2520_tx(struct ieee802154_dev *dev, struct sk_buff *skb)
+{
+	struct cc2520_private *priv = dev->priv;
+	unsigned long flags;
+	int rc;
+	u8 status = 0;
+
+	rc = cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
+	if (rc)
+		goto err_tx;
+
+	rc = cc2520_write_txfifo(priv, skb->data, skb->len);
+	if (rc)
+		goto err_tx;
+
+	rc = cc2520_get_status(priv, &status);
+	if (rc)
+		goto err_tx;
+
+	if (status & CC2520_STATUS_TX_UNDERFLOW) {
+		dev_err(&priv->spi->dev, "cc2520 tx underflow exception\n");
+		goto err_tx;
+	}
+
+	spin_lock_irqsave(&priv->lock, flags);
+	BUG_ON(priv->is_tx);
+	priv->is_tx = 1;
+	spin_unlock_irqrestore(&priv->lock, flags);
+
+	rc = cc2520_cmd_strobe(priv, CC2520_CMD_STXONCCA);
+	if (rc)
+		goto err;
+
+	rc = wait_for_completion_interruptible(&priv->tx_complete);
+	if (rc < 0)
+		goto err;
+
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHTX);
+	cc2520_cmd_strobe(priv, CC2520_CMD_SRXON);
+
+	return rc;
+err:
+	spin_lock_irqsave(&priv->lock, flags);
+	priv->is_tx = 0;
+	spin_unlock_irqrestore(&priv->lock, flags);
+err_tx:
+	return rc;
+}
+
+
+static int cc2520_rx(struct cc2520_private *priv)
+{
+	u8 len = 0, lqi = 0, bytes = 1;
+	struct sk_buff *skb;
+
+	cc2520_read_rxfifo(priv, &len, bytes, &lqi);
+
+	skb = alloc_skb(len, GFP_KERNEL);
+	if (!skb)
+		return -ENOMEM;
+
+	cc2520_read_rxfifo(priv, skb_put(skb, len), len, &lqi);
+	if (len < 2) {
+		kfree_skb(skb);
+		return -EINVAL;
+	}
+
+	skb_trim(skb, skb->len - 2);
+
+	ieee802154_rx_irqsafe(priv->dev, skb, lqi);
+
+	dev_vdbg(&priv->spi->dev, "RXFIFO: %x %x\n", len, lqi);
+
+	return 0;
+}
+
+static int
+cc2520_ed(struct ieee802154_dev *dev, u8 *level)
+{
+	struct cc2520_private *priv = dev->priv;
+	u8 status = 0xff;
+	u8 rssi;
+	int ret;
+
+	ret = cc2520_read_register(priv , CC2520_RSSISTAT, &status);
+	if (ret)
+		return ret;
+
+	if (status != RSSI_VALID) {
+		ret = -EINVAL;
+		return ret;
+	}
+
+	ret = cc2520_read_register(priv , CC2520_RSSI, &rssi);
+	if (ret)
+		return ret;
+
+	/* level = RSSI(rssi) - OFFSET [dBm] : offset is 76dBm*/
+	*level = rssi - RSSI_OFFSET;
+
+	return ret;
+}
+
+static int
+cc2520_set_channel(struct ieee802154_dev *dev, int page, int channel)
+{
+	struct cc2520_private *priv = dev->priv;
+	int ret;
+
+	might_sleep();
+	dev_dbg(&priv->spi->dev, "trying to set channel\n");
+
+	BUG_ON(page != 0);
+	BUG_ON(channel < CC2520_MINCHANNEL);
+	BUG_ON(channel > CC2520_MAXCHANNEL);
+
+	ret = cc2520_write_register(priv, CC2520_FREQCTRL,
+				    11 + 5*(channel - 11));
+
+	return ret;
+}
+
+static struct ieee802154_ops cc2520_ops = {
+	.owner = THIS_MODULE,
+	.start = cc2520_start,
+	.stop = cc2520_stop,
+	.xmit = cc2520_tx,
+	.ed = cc2520_ed,
+	.set_channel = cc2520_set_channel,
+};
+
+static int cc2520_register(struct cc2520_private *priv)
+{
+	int ret = -ENOMEM;
+
+	priv->dev = ieee802154_alloc_device(sizeof(*priv), &cc2520_ops);
+	if (!priv->dev)
+		goto err_ret;
+
+	priv->dev->priv = priv;
+	priv->dev->parent = &priv->spi->dev;
+	priv->dev->extra_tx_headroom = 0;
+
+	/* We do support only 2.4 Ghz */
+	priv->dev->phy->channels_supported[0] = 0x7FFF800;
+	priv->dev->flags = IEEE802154_HW_OMIT_CKSUM;
+
+	dev_vdbg(&priv->spi->dev, "registered cc2520\n");
+	ret = ieee802154_register_device(priv->dev);
+	if (ret)
+		goto err_free_device;
+
+	return 0;
+
+err_free_device:
+	ieee802154_free_device(priv->dev);
+err_ret:
+	return ret;
+}
+
+static void cc2520_fifop_irqwork(struct work_struct *work)
+{
+	struct cc2520_private *priv
+		= container_of(work, struct cc2520_private, fifop_irqwork);
+
+	dev_dbg(&priv->spi->dev, "fifop interrupt received\n");
+
+	if (gpio_get_value(priv->fifo_pin))
+		cc2520_rx(priv);
+	else
+		dev_err(&priv->spi->dev, "rxfifo overflow\n");
+
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
+	cc2520_cmd_strobe(priv, CC2520_CMD_SFLUSHRX);
+}
+
+static irqreturn_t cc2520_fifop_isr(int irq, void *data)
+{
+	struct cc2520_private *priv = data;
+
+	schedule_work(&priv->fifop_irqwork);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t cc2520_sfd_isr(int irq, void *data)
+{
+	struct cc2520_private *priv = data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	if (priv->is_tx) {
+		priv->is_tx = 0;
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&priv->spi->dev, "SFD for TX\n");
+		complete(&priv->tx_complete);
+	} else {
+		spin_unlock_irqrestore(&priv->lock, flags);
+		dev_dbg(&priv->spi->dev, "SFD for RX\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int cc2520_hw_init(struct cc2520_private *priv)
+{
+	u8 status = 0, state = 0xff;
+	int ret;
+	int timeout = 100;
+
+	ret = cc2520_read_register(priv, CC2520_FSMSTAT1, &state);
+	if (ret)
+		goto err_ret;
+
+	if (state != STATE_IDLE)
+		return -EINVAL;
+
+	do {
+		ret = cc2520_get_status(priv, &status);
+		if (ret)
+			goto err_ret;
+
+		if (timeout-- <= 0) {
+			dev_err(&priv->spi->dev, "oscillator start failed!\n");
+			return ret;
+		}
+		udelay(1);
+	} while (!(status & CC2520_STATUS_XOSC32M_STABLE));
+
+	dev_vdbg(&priv->spi->dev, "oscillator successfully brought up\n");
+
+	/*Registers default value: section 28.1 in Datasheet*/
+	ret = cc2520_write_register(priv, CC2520_TXPOWER, 0xF7);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_CCACTRL0, 0x1A);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_MDMCTRL0, 0x85);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_MDMCTRL1, 0x14);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_RXCTRL, 0x3f);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FSCTRL, 0x5a);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FSCAL1, 0x2b);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_AGCCTRL1, 0x11);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST0, 0x10);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST1, 0x0e);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_ADCTEST2, 0x03);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FRMCTRL0, 0x60);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FRMCTRL1, 0x03);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FRMFILT0, 0x00);
+	if (ret)
+		goto err_ret;
+
+	ret = cc2520_write_register(priv, CC2520_FIFOPCTRL, 127);
+	if (ret)
+		goto err_ret;
+
+	return 0;
+
+err_ret:
+	return ret;
+}
+
+static struct cc2520_platform_data *
+cc2520_get_platform_data(struct spi_device *spi)
+{
+	struct cc2520_platform_data *pdata;
+	struct device_node __maybe_unused *np = spi->dev.of_node;
+	struct cc2520_private *priv = spi_get_drvdata(spi);
+
+	if (!IS_ENABLED(CONFIG_OF) || !np)
+		return spi->dev.platform_data;
+
+	pdata = devm_kzalloc(&spi->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		goto done;
+
+	pdata->fifo = of_get_named_gpio(np, "fifo-gpio", 0);
+	priv->fifo_pin = pdata->fifo;
+
+	pdata->fifop = of_get_named_gpio(np, "fifop-gpio", 0);
+
+	pdata->sfd = of_get_named_gpio(np, "sfd-gpio", 0);
+	pdata->cca = of_get_named_gpio(np, "cca-gpio", 0);
+	pdata->vreg = of_get_named_gpio(np, "vreg-gpio", 0);
+	pdata->reset = of_get_named_gpio(np, "reset-gpio", 0);
+
+	spi->dev.platform_data = pdata;
+
+done:
+	return pdata;
+}
+
+static int cc2520_probe(struct spi_device *spi)
+{
+	struct cc2520_private *priv;
+	struct pinctrl *pinctrl;
+	struct cc2520_platform_data *pdata;
+	struct device_node __maybe_unused *np = spi->dev.of_node;
+	int ret;
+
+	priv = devm_kzalloc(&spi->dev,
+			    sizeof(struct cc2520_private), GFP_KERNEL);
+	if (!priv) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	spi_set_drvdata(spi, priv);
+
+	pinctrl = devm_pinctrl_get_select_default(&spi->dev);
+	if (IS_ERR(pinctrl))
+		dev_warn(&spi->dev,
+			 "pinctrl pins are not configured from the driver");
+
+	pdata = cc2520_get_platform_data(spi);
+	if (!pdata) {
+		dev_err(&spi->dev, "no platform data\n");
+		return -EINVAL;
+	}
+
+	priv->spi = spi;
+
+	priv->buf = devm_kzalloc(&spi->dev,
+				 SPI_COMMAND_BUFFER, GFP_KERNEL);
+	if (!priv->buf) {
+		ret = -ENOMEM;
+		goto err_ret;
+	}
+
+	mutex_init(&priv->buffer_mutex);
+	INIT_WORK(&priv->fifop_irqwork, cc2520_fifop_irqwork);
+	spin_lock_init(&priv->lock);
+	init_completion(&priv->tx_complete);
+
+	/* Request all the gpio's */
+	if (!gpio_is_valid(pdata->fifo)) {
+		dev_err(&spi->dev, "fifo gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->fifo,
+				    GPIOF_IN, "fifo");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata->cca)) {
+		dev_err(&spi->dev, "cca gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->cca,
+				    GPIOF_IN, "cca");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata->fifop)) {
+		dev_err(&spi->dev, "fifop gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->fifop,
+				    GPIOF_IN, "fifop");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata->sfd)) {
+		dev_err(&spi->dev, "sfd gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->sfd,
+				    GPIOF_IN, "sfd");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata->reset)) {
+		dev_err(&spi->dev, "reset gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->reset,
+				    GPIOF_OUT_INIT_LOW, "reset");
+	if (ret)
+		goto err_hw_init;
+
+	if (!gpio_is_valid(pdata->vreg)) {
+		dev_err(&spi->dev, "vreg gpio is not valid\n");
+		ret = -EINVAL;
+		goto err_hw_init;
+	}
+
+	ret = devm_gpio_request_one(&spi->dev, pdata->vreg,
+				    GPIOF_OUT_INIT_LOW, "vreg");
+	if (ret)
+		goto err_hw_init;
+
+
+	gpio_set_value(pdata->vreg, HIGH);
+	udelay(100);
+
+	gpio_set_value(pdata->reset, HIGH);
+	udelay(200);
+
+	ret = cc2520_hw_init(priv);
+	if (ret)
+		goto err_hw_init;
+
+	/* Set up fifop interrupt */
+	ret = devm_request_irq(&spi->dev,
+			       gpio_to_irq(pdata->fifop),
+			       cc2520_fifop_isr,
+			       IRQF_TRIGGER_RISING,
+			       dev_name(&spi->dev),
+			       priv);
+	if (ret) {
+		dev_err(&spi->dev, "could not get fifop irq\n");
+		goto err_hw_init;
+	}
+
+	/* Set up sfd interrupt */
+	ret = devm_request_irq(&spi->dev,
+			       gpio_to_irq(pdata->sfd),
+			       cc2520_sfd_isr,
+			       IRQF_TRIGGER_FALLING,
+			       dev_name(&spi->dev),
+			       priv);
+	if (ret) {
+		dev_err(&spi->dev, "could not get sfd irq\n");
+		goto err_hw_init;
+	}
+
+	ret = cc2520_register(priv);
+	if (ret)
+		goto err_hw_init;
+
+	return 0;
+
+err_hw_init:
+	mutex_destroy(&priv->buffer_mutex);
+	flush_work(&priv->fifop_irqwork);
+
+err_ret:
+	return ret;
+}
+
+static int cc2520_remove(struct spi_device *spi)
+{
+	struct cc2520_private *priv = spi_get_drvdata(spi);
+
+	ieee802154_unregister_device(priv->dev);
+	ieee802154_free_device(priv->dev);
+
+	mutex_destroy(&priv->buffer_mutex);
+	flush_work(&priv->fifop_irqwork);
+
+	return 0;
+}
+
+static const struct spi_device_id cc2520_ids[] = {
+	{"cc2520", },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, cc2520_ids);
+
+static const struct of_device_id cc2520_of_ids[] = {
+	{.compatible = "ti,cc2520", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, cc2520_of_ids);
+
+/*SPI driver structure*/
+static struct spi_driver cc2520_driver = {
+	.driver = {
+		.name = "cc2520",
+		.bus = &spi_bus_type,
+		.owner = THIS_MODULE,
+		.of_match_table = of_match_ptr(cc2520_of_ids),
+	},
+	.id_table = cc2520_ids,
+	.probe = cc2520_probe,
+	.remove = cc2520_remove,
+};
+module_spi_driver(cc2520_driver);
+
+MODULE_AUTHOR("Varka Bhadram <varkab@cdac.in>");
+MODULE_DESCRIPTION("CC2520 Transceiver Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/spi/cc2520.h b/include/linux/spi/cc2520.h
new file mode 100644
index 0000000..56ce81e
--- /dev/null
+++ b/include/linux/spi/cc2520.h
@@ -0,0 +1,26 @@
+/* Header file cc2520 driver
+ *
+ * Copyright (C) 2014 Varka Bhadram <varkab@cdac.in>
+ *                    Md.Jamal Mohiuddin <mjmohiuddin@cdac.in>
+ *                    P Sowjanya <sowjanyap@cdac.in>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __CC2520_H
+#define __CC2520_H
+
+struct cc2520_platform_data {
+	int fifo;
+	int fifop;
+	int cca;
+	int sfd;
+	int reset;
+	int vreg;
+};
+
+#endif
-- 
1.7.9.5

[PATCH net-next v2 2/3] ieee802154: cc2520: add driver to kernel build system

[Varka Bhadram]

Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
---
 drivers/net/ieee802154/Kconfig  |   11 +++++++++++
 drivers/net/ieee802154/Makefile |    1 +
 2 files changed, 12 insertions(+)

diff --git a/drivers/net/ieee802154/Kconfig b/drivers/net/ieee802154/Kconfig
index 3e89bea..680422f 100644
--- a/drivers/net/ieee802154/Kconfig
+++ b/drivers/net/ieee802154/Kconfig
@@ -51,3 +51,14 @@ config IEEE802154_MRF24J40
 
 	  This driver can also be built as a module. To do so, say M here.
 	  the module will be called 'mrf24j40'.
+
+config IEEE802154_CC2520
+	depends on IEEE802154_DRIVERS && MAC802154
+	tristate "cc2520 transceiver driver"
+	depends on SPI
+	---help---
+	  Say Y here to enable the CC2520 SPI 802.15.4 wireless
+	  controller.
+
+	  This driver can also be built as a module. To do so, say M here.
+	  the module will be called 'cc2520'.
diff --git a/drivers/net/ieee802154/Makefile b/drivers/net/ieee802154/Makefile
index abb0c08..655cb95 100644
--- a/drivers/net/ieee802154/Makefile
+++ b/drivers/net/ieee802154/Makefile
@@ -2,3 +2,4 @@ obj-$(CONFIG_IEEE802154_FAKEHARD) += fakehard.o
 obj-$(CONFIG_IEEE802154_FAKELB) += fakelb.o
 obj-$(CONFIG_IEEE802154_AT86RF230) += at86rf230.o
 obj-$(CONFIG_IEEE802154_MRF24J40) += mrf24j40.o
+obj-$(CONFIG_IEEE802154_CC2520) += cc2520.o
-- 
1.7.9.5


------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems

[PATCH net-next v2 3/3] devicetree: add devicetree bindings for cc2520 driver

[Varka Bhadram]

devicetree bindings for cc2520 radio driver.

Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
---
 .../devicetree/bindings/net/ieee802154/cc2520.txt  |   26 ++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/ieee802154/cc2520.txt

diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
new file mode 100644
index 0000000..f0a749d
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
@@ -0,0 +1,26 @@
+CC2520 IEEE 802.15.4 Compatible Radio
+
+Required properties:
+	- compatible:		should be "ti,cc2520"
+	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
+				sync or async operation mode
+	- reg:			the chipselect index
+	- mode:			SPI mode
+Example:
+
+	cc2520@0 {
+		compatible = "ti,cc2520";
+		reg = <0>;
+		spi-max-frequency = <4000000>;
+		mode = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&cc2520_cape_pins>;	/*GPIO pin muxing details*/
+
+		fifo-gpio = <&gpio1 18 0>;
+		fifop-gpio = <&gpio1 19 0>;
+		sfd-gpio = <&gpio1 13 0>;
+		cca-gpio = <&gpio1 16 0>;
+		vreg-gpio = <&gpio0 31 0>;
+		reset-gpio = <&gpio1 12 0>;
+	};
-- 
1.7.9.5


------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems

Re: [PATCH net-next v2 3/3] devicetree: add devicetree bindings for cc2520 driver

[Mark Rutland]

On Wed, Jun 18, 2014 at 06:16:05AM +0100, Varka Bhadram wrote:
> devicetree bindings for cc2520 radio driver.
> 
> Signed-off-by: Varka Bhadram <varkab@cdac.in>
> ---
>  .../devicetree/bindings/net/ieee802154/cc2520.txt  |   26 ++++++++++++++++++++
>  1 file changed, 26 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
> 
> diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
> new file mode 100644
> index 0000000..f0a749d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
> @@ -0,0 +1,26 @@
> +CC2520 IEEE 802.15.4 Compatible Radio
> +
> +Required properties:
> +	- compatible:		should be "ti,cc2520"
> +	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
> +				sync or async operation mode
> +	- reg:			the chipselect index
> +	- mode:			SPI mode

What exactly is this property? It doesn't seem to be used by the driver,
the example is opaque, and this doesn't seem to match any existing
bindings (a grep for "mode" in Documentation/devicetree/bindings/spi
only found me a string "mode" property).

The example has several properties (the GPIOs and pinctrl) not listed
here...

Mark.

> +Example:
> +
> +	cc2520@0 {
> +		compatible = "ti,cc2520";
> +		reg = <0>;
> +		spi-max-frequency = <4000000>;
> +		mode = <1>;
> +
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&cc2520_cape_pins>;	/*GPIO pin muxing details*/
> +
> +		fifo-gpio = <&gpio1 18 0>;
> +		fifop-gpio = <&gpio1 19 0>;
> +		sfd-gpio = <&gpio1 13 0>;
> +		cca-gpio = <&gpio1 16 0>;
> +		vreg-gpio = <&gpio0 31 0>;
> +		reset-gpio = <&gpio1 12 0>;
> +	};
> -- 
> 1.7.9.5
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

Re: [PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Mark Rutland]

On Wed, Jun 18, 2014 at 06:16:03AM +0100, Varka Bhadram wrote:
> Driver support:
>         - Tx and Rx of IEEE-802.15.4 packets.
>         - Energy Detection on channel.
>         - Setting the Channel for the radio. [b/w 11 - 26 channels]
>         - Start and Stop the radio.
>
> Signed-off-by: Varka Bhadram <varkab@cdac.in>
> ---
>  drivers/net/ieee802154/cc2520.c |  968 +++++++++++++++++++++++++++++++++++++++
>  include/linux/spi/cc2520.h      |   26 ++
>  2 files changed, 994 insertions(+)
>  create mode 100644 drivers/net/ieee802154/cc2520.c
>  create mode 100644 include/linux/spi/cc2520.h

[...]

> +static struct cc2520_platform_data *
> +cc2520_get_platform_data(struct spi_device *spi)
> +{
> +       struct cc2520_platform_data *pdata;
> +       struct device_node __maybe_unused *np = spi->dev.of_node;
> +       struct cc2520_private *priv = spi_get_drvdata(spi);
> +
> +       if (!IS_ENABLED(CONFIG_OF) || !np)
> +               return spi->dev.platform_data;

Surely "if (!np)" is good enough?

[...]

> +static int cc2520_probe(struct spi_device *spi)
> +{
> +       struct cc2520_private *priv;
> +       struct pinctrl *pinctrl;
> +       struct cc2520_platform_data *pdata;
> +       struct device_node __maybe_unused *np = spi->dev.of_node;

This looks to be definitely unused rather than __maybe_unused. There are
no other occuences of "np" in this function.

Mark.

Re: [PATCH net-next v2 3/3] devicetree: add devicetree bindings for cc2520 driver

[Varka Bhadram]

Hi,

On 06/18/2014 02:35 PM, Mark Rutland wrote:
> On Wed, Jun 18, 2014 at 06:16:05AM +0100, Varka Bhadram wrote:
>> devicetree bindings for cc2520 radio driver.
>>
>> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
>> ---
>>   .../devicetree/bindings/net/ieee802154/cc2520.txt  |   26 ++++++++++++++++++++
>>   1 file changed, 26 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
>>
>> diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
>> new file mode 100644
>> index 0000000..f0a749d
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt
>> @@ -0,0 +1,26 @@
>> +CC2520 IEEE 802.15.4 Compatible Radio
>> +
>> +Required properties:
>> +	- compatible:		should be "ti,cc2520"
>> +	- spi-max-frequency:	maximal bus speed (8000000), should be set to 4000000 depends
>> +				sync or async operation mode
>> +	- reg:			the chipselect index
>> +	- mode:			SPI mode
> What exactly is this property? It doesn't seem to be used by the driver,
> the example is opaque, and this doesn't seem to match any existing
> bindings (a grep for "mode" in Documentation/devicetree/bindings/spi
> only found me a string "mode" property).
>
> The example has several properties (the GPIOs and pinctrl) not listed
> here...

Previously is used this 'mode' property to set the SPI mode. but i am not using now. I will remove it.
And also i will add the optional properties GPIO and pinctrl in next version.

Thanks for comments.

-Varka Bhadram.

>
> Mark.
>
>> +Example:
>> +
>> +	cc2520@0 {
>> +		compatible = "ti,cc2520";
>> +		reg = <0>;
>> +		spi-max-frequency = <4000000>;
>> +		mode = <1>;
>> +
>> +		pinctrl-names = "default";
>> +		pinctrl-0 = <&cc2520_cape_pins>;	/*GPIO pin muxing details*/
>> +
>> +		fifo-gpio = <&gpio1 18 0>;
>> +		fifop-gpio = <&gpio1 19 0>;
>> +		sfd-gpio = <&gpio1 13 0>;
>> +		cca-gpio = <&gpio1 16 0>;
>> +		vreg-gpio = <&gpio0 31 0>;
>> +		reset-gpio = <&gpio1 12 0>;
>> +	};
>> -- 
>> 1.7.9.5
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe devicetree" in
>> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>


------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems

Re: [PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Varka Bhadram]

[-- Attachment #1.1: Type: text/plain, Size: 1785 bytes --]

On 06/18/2014 02:40 PM, Mark Rutland wrote:
> On Wed, Jun 18, 2014 at 06:16:03AM +0100, Varka Bhadram wrote:
>> Driver support:
>>          - Tx and Rx of IEEE-802.15.4 packets.
>>          - Energy Detection on channel.
>>          - Setting the Channel for the radio. [b/w 11 - 26 channels]
>>          - Start and Stop the radio.
>>
>> Signed-off-by: Varka Bhadram <varkab-If5XQcfNmg0@public.gmane.org>
>> ---
>>   drivers/net/ieee802154/cc2520.c |  968 +++++++++++++++++++++++++++++++++++++++
>>   include/linux/spi/cc2520.h      |   26 ++
>>   2 files changed, 994 insertions(+)
>>   create mode 100644 drivers/net/ieee802154/cc2520.c
>>   create mode 100644 include/linux/spi/cc2520.h
> [...]
>
>> +static struct cc2520_platform_data *
>> +cc2520_get_platform_data(struct spi_device *spi)
>> +{
>> +       struct cc2520_platform_data *pdata;
>> +       struct device_node __maybe_unused *np = spi->dev.of_node;
>> +       struct cc2520_private *priv = spi_get_drvdata(spi);
>> +
>> +       if (!IS_ENABLED(CONFIG_OF) || !np)
>> +               return spi->dev.platform_data;
> Surely "if (!np)" is good enough?

This condition i chooses because either of thing is defined.
If the CONFIG_OF is enabled or devicetree node defined in the devicetree source.

I think checking np is enough.

> [...]
>
>> +static int cc2520_probe(struct spi_device *spi)
>> +{
>> +       struct cc2520_private *priv;
>> +       struct pinctrl *pinctrl;
>> +       struct cc2520_platform_data *pdata;
>> +       struct device_node __maybe_unused *np = spi->dev.of_node;
> This looks to be definitely unused rather than __maybe_unused. There are
> no other occuences of "np" in this function.

|This macro defined like this.
#define  __maybe_unused  __attribute__((unused))

|

> Mark.

Varka Bhadram



[-- Attachment #1.2: Type: text/html, Size: 2939 bytes --]

[-- Attachment #2: Type: text/plain, Size: 370 bytes --]

------------------------------------------------------------------------------
HPCC Systems Open Source Big Data Platform from LexisNexis Risk Solutions
Find What Matters Most in Your Big Data with HPCC Systems
Open Source. Fast. Scalable. Simple. Ideal for Dirty Data.
Leverages Graph Analysis for Fast Processing & Easy Data Exploration
http://p.sf.net/sfu/hpccsystems

[-- Attachment #3: Type: text/plain, Size: 213 bytes --]

_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f@public.gmane.org
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel

Re: [PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Mark Rutland]

On Wed, Jun 18, 2014 at 10:26:16AM +0100, Varka Bhadram wrote:
> +static int cc2520_probe(struct spi_device *spi)
> +{
> +       struct cc2520_private *priv;
> +       struct pinctrl *pinctrl;
> +       struct cc2520_platform_data *pdata;
> +       struct device_node __maybe_unused *np = spi->dev.of_node;
> 
> This looks to be definitely unused rather than __maybe_unused. There are
> no other occuences of "np" in this function.
> 
> This macro defined like this.
> #define __maybe_unused  __attribute__((unused))

Sure, but that's irrelevant. There's absolutely no point in this
variable existing at all, and it can simply disappear.

Mark.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Varka Bhadram]

On 06/18/2014 03:25 PM, Mark Rutland wrote:
> On Wed, Jun 18, 2014 at 10:26:16AM +0100, Varka Bhadram wrote:
>> +static int cc2520_probe(struct spi_device *spi)
>> +{
>> +       struct cc2520_private *priv;
>> +       struct pinctrl *pinctrl;
>> +       struct cc2520_platform_data *pdata;
>> +       struct device_node __maybe_unused *np = spi->dev.of_node;
>>
>> This looks to be definitely unused rather than __maybe_unused. There are
>> no other occuences of "np" in this function.
>>
>> This macro defined like this.
>> #define __maybe_unused  __attribute__((unused))
> Sure, but that's irrelevant. There's absolutely no point in this
> variable existing at all, and it can simply disappear.
>
> Mark.

If we don't use that macro the compiler triggers warnings saying that:  warning: unused variable ‘np’ [-Wunused-variable]


Varka Bhadram

Re: [PATCH net-next v2 1/3] ieee802154: cc2520: adds driver for TI CC2520 radio

[Mark Rutland]

On Wed, Jun 18, 2014 at 12:13:06PM +0100, Varka Bhadram wrote:
> On 06/18/2014 03:25 PM, Mark Rutland wrote:
> > On Wed, Jun 18, 2014 at 10:26:16AM +0100, Varka Bhadram wrote:
> >> +static int cc2520_probe(struct spi_device *spi)
> >> +{
> >> +       struct cc2520_private *priv;
> >> +       struct pinctrl *pinctrl;
> >> +       struct cc2520_platform_data *pdata;
> >> +       struct device_node __maybe_unused *np = spi->dev.of_node;
> >>
> >> This looks to be definitely unused rather than __maybe_unused. There are
> >> no other occuences of "np" in this function.
> >>
> >> This macro defined like this.
> >> #define __maybe_unused  __attribute__((unused))
> > Sure, but that's irrelevant. There's absolutely no point in this
> > variable existing at all, and it can simply disappear.
> >
> > Mark.
> 
> If we don't use that macro the compiler triggers warnings saying that:  warning: unused variable ‘np’ [-Wunused-variable]

Then drop the _variable_, not just the annotation.

Mark.