[PATCH 4/7] ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E

[Lee Jones <lee.jones@linaro.org>]

All the infrastructure is now in place for ST's PWM controller.  This
patch takes the final step and enables the IP on the 2020 Rev-E
development platform.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
 arch/arm/boot/dts/stih416-b2020e.dts | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm/boot/dts/stih416-b2020e.dts b/arch/arm/boot/dts/stih416-b2020e.dts
index ba0fa2c..07cbf5b 100644
--- a/arch/arm/boot/dts/stih416-b2020e.dts
+++ b/arch/arm/boot/dts/stih416-b2020e.dts
@@ -31,5 +31,15 @@
 		ethernet1: dwmac@fef08000 {
 			snps,reset-gpio = <&PIO0 7>;
 		};
+
+		/* SAS PWM Module */
+		pwm0: pwm@fed10000 {
+			status		= "okay";
+		};
+
+		/* SBC PWM Module */
+		pwm1: pwm@fe510000 {
+			status		= "okay";
+		};
 	};
 };
-- 
1.8.3.2