From: Sean Cross <xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
To: Charles Keepax
<ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org>,
lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
Takashi Iwai <tiwai-l3A5Bk7waGM@public.gmane.org>,
Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
Philipp Zabel <p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>,
Fabio Estevam
<fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
Nicolin Chen <b42378-KZfg59tc24xl57MIdRCFDg@public.gmane.org>,
alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: bunnie-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org,
Sean Cross <xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH v6 0/3] Add ES8328 audio codec
Date: Mon, 23 Jun 2014 18:35:39 +0800 [thread overview]
Message-ID: <1403519742-4076-1-git-send-email-xobs@kosagi.com> (raw)
This patchset adds support for the Everest Semi ES8328 audio codec. It also
adds support for using the es8328 on IMX boards.
We write a machine driver rather than using simple-card because the machine
driver needs to support regulators for the speaker amps and as well as
supporting headphone jacks.
Changes since v5:
- Removed empty imx_set_frequency function from imx-es8328.c
- Move the clock from imx-audio-es8328 to the es8328 codec itself
- Add support for 2x (22.5792 MHz) and 1x (11.2896 MHz) source clocks
- Restore registers on resume
- Document pins for ES8328, including input pins
Changes since v4:
- Simplify clock handling and use assigned-clock-parents
- Move the codec regulator from the machine driver to the codec
- Specify all four regulators, and require their presence
- Fix audio recording, such that it enables the PGA
Changes since v3:
- Add OF bindings for everest,es8328
- Add back in patch to add everest as a vendor prefix
- Give clocks more generic names
- Document required clocks in DT bindings document
Changes since v2:
- Change deemph to a bool, and update based on sample rate
- Replace value enums with regular enums
- Break SPI and I2C drivers into their own modules
- Rename everest,es8328 to es8328 as the module wasn't getting detected.
Because of this, the patch to vendor-prefixes.txt has been dropped.
Changes since v1:
- Rename HP/Speaker to OUT1/OUT2
- Use DAPM widgets for startup/shutdown
- Add regulator support to machine driver
Sean Cross (3):
devicetree: bindings: Add Everest Semicodunctor
ASoC: add es8328 codec driver
ASoC: fsl: add imx-es8328 machine driver
Documentation/devicetree/bindings/sound/es8328.txt | 38 ++
.../devicetree/bindings/sound/imx-audio-es8328.txt | 61 ++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
sound/soc/codecs/Kconfig | 13 +
sound/soc/codecs/Makefile | 6 +
sound/soc/codecs/es8328-i2c.c | 60 ++
sound/soc/codecs/es8328-spi.c | 49 ++
sound/soc/codecs/es8328.c | 719 +++++++++++++++++++++
sound/soc/codecs/es8328.h | 314 +++++++++
sound/soc/fsl/Kconfig | 14 +
sound/soc/fsl/Makefile | 2 +
sound/soc/fsl/imx-es8328.c | 224 +++++++
12 files changed, 1501 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/es8328.txt
create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
create mode 100644 sound/soc/codecs/es8328-i2c.c
create mode 100644 sound/soc/codecs/es8328-spi.c
create mode 100644 sound/soc/codecs/es8328.c
create mode 100644 sound/soc/codecs/es8328.h
create mode 100644 sound/soc/fsl/imx-es8328.c
--
2.0.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-06-23 10:35 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-23 10:35 Sean Cross [this message]
[not found] ` <1403519742-4076-1-git-send-email-xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-23 10:35 ` [PATCH v6 1/3] devicetree: bindings: Add Everest Semicodunctor Sean Cross
2014-06-23 10:35 ` [PATCH v6 2/3] ASoC: add es8328 codec driver Sean Cross
2014-06-23 10:35 ` [PATCH v6 3/3] ASoC: fsl: add imx-es8328 machine driver Sean Cross
[not found] ` <1403519742-4076-4-git-send-email-xobs-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org>
2014-06-25 11:00 ` Mark Rutland
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403519742-4076-1-git-send-email-xobs@kosagi.com \
--to=xobs-nxmmniax+rbqt0dzr+alfa@public.gmane.org \
--cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
--cc=b42378-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=bunnie-nXMMniAx+RbQT0dZR+AlfA@public.gmane.org \
--cc=ckeepax-yzvPICuk2AATkU/dhu1WVueM+bqZidxxQQ4Iyu8u01E@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=fabio.estevam-KZfg59tc24xl57MIdRCFDg@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lars-Qo5EllUWu/uELgA04lAiVw@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org \
--cc=perex-/Fr2/VpizcU@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=tiwai-l3A5Bk7waGM@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).