From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Lee Jones <lee.jones@linaro.org>,
Samuel Ortiz <sameo@linux.intel.com>,
Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Sjoerd Simons <sjoerd.simons@collabora.co.uk>,
Daniel Stone <daniels@collabora.com>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v4 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system
Date: Thu, 26 Jun 2014 11:03:59 +0200 [thread overview]
Message-ID: <1403773439.27156.1.camel@AMDC1943> (raw)
In-Reply-To: <1403723019-6212-3-git-send-email-javier.martinez@collabora.co.uk>
On śro, 2014-06-25 at 21:03 +0200, Javier Martinez Canillas wrote:
> From: Doug Anderson <dianders@chromium.org>
>
> The max77686 includes an RTC that keeps power during suspend. It's
> convenient to be able to use it as a wakeup source.
>
> NOTE: due to wakeup ordering problems this patch alone doesn't work so
> well on exynos5250-snow. You also need something that brings the i2c
> bus up before the max77686 wakeup runs.
>
> Signed-off-by: Doug Anderson <dianders@chromium.org>
> Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
>
> Changes since v3:
> - Keep the note that this patch needs another change due wakeup
> ordering problems.
>
> drivers/rtc/rtc-max77686.c | 28 ++++++++++++++++++++++++++++
> 1 file changed, 28 insertions(+)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
> diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
> index d20a7f0..c1c6055 100644
> --- a/drivers/rtc/rtc-max77686.c
> +++ b/drivers/rtc/rtc-max77686.c
> @@ -583,6 +583,33 @@ static void max77686_rtc_shutdown(struct platform_device *pdev)
> #endif /* MAX77686_RTC_WTSR_SMPL */
> }
>
> +#ifdef CONFIG_PM_SLEEP
> +static int max77686_rtc_suspend(struct device *dev)
> +{
> + if (device_may_wakeup(dev)) {
> + struct max77686_rtc_info *info = dev_get_drvdata(dev);
> +
> + return enable_irq_wake(info->virq);
> + }
> +
> + return 0;
> +}
> +
> +static int max77686_rtc_resume(struct device *dev)
> +{
> + if (device_may_wakeup(dev)) {
> + struct max77686_rtc_info *info = dev_get_drvdata(dev);
> +
> + return disable_irq_wake(info->virq);
> + }
> +
> + return 0;
> +}
> +#endif
> +
> +static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
> + max77686_rtc_suspend, max77686_rtc_resume);
> +
> static const struct platform_device_id rtc_id[] = {
> { "max77686-rtc", 0 },
> {},
> @@ -592,6 +619,7 @@ static struct platform_driver max77686_rtc_driver = {
> .driver = {
> .name = "max77686-rtc",
> .owner = THIS_MODULE,
> + .pm = &max77686_rtc_pm_ops,
> },
> .probe = max77686_rtc_probe,
> .shutdown = max77686_rtc_shutdown,
next prev parent reply other threads:[~2014-06-26 9:03 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-25 19:03 [PATCH v4 00/14] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 01/14] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 02/14] mfd: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-06-26 9:03 ` Krzysztof Kozlowski [this message]
2014-06-25 19:03 ` [PATCH v4 03/14] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 04/14] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-06-25 19:54 ` Doug Anderson
2014-06-25 19:03 ` [PATCH v4 05/14] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-06-26 9:00 ` Krzysztof Kozlowski
2014-06-26 11:51 ` Yadwinder Singh Brar
2014-06-26 12:31 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 06/14] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 07/14] mfd: Add driver for Maxim 77802 Power Management IC Javier Martinez Canillas
2014-06-26 9:31 ` Krzysztof Kozlowski
2014-06-26 11:13 ` Javier Martinez Canillas
2014-06-26 16:12 ` Doug Anderson
[not found] ` <CAD=FV=U5sBQ4VDG65D4rTnfruo5XzQH_EMs4SMpO4BjY1UHA5Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-06-26 16:18 ` Javier Martinez Canillas
2014-06-26 16:29 ` Doug Anderson
2014-06-26 16:36 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 08/14] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 09/14] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 10/14] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-06-26 10:08 ` Krzysztof Kozlowski
2014-06-26 11:26 ` Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 11/14] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
[not found] ` <1403723019-6212-12-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-06-26 10:40 ` Krzysztof Kozlowski
2014-06-25 19:03 ` [PATCH v4 12/14] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 13/14] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-06-25 19:03 ` [PATCH v4 14/14] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
2014-06-26 13:32 ` [PATCH v4 00/14] Add Maxim 77802 PMIC support Naveen Krishna Ch
[not found] ` <CAHfPSqB9620OiHxd_w3ReS6gg7PzYK1eN11rH6Z6boai0x=2og-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-06-26 13:56 ` Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403773439.27156.1.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=a.zummo@towertech.it \
--cc=broonie@kernel.org \
--cc=daniels@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=sameo@linux.intel.com \
--cc=sjoerd.simons@collabora.co.uk \
--cc=tomeu.vizoso@collabora.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).