From: Gabriel FERNANDEZ <gabriel.fernandez@st.com>
To: mturquette@linaro.org, robh+dt@kernel.org, pawel.moll@arm.com,
mark.rutland@arm.com, ijc+devicetree@hellion.org.uk,
galak@codeaurora.org
Cc: devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, kernel@stlinux.com,
Lee Jones <lee.jones@linaro.org>,
Gabriel Fernandez <gabriel.fernandez@linaro.org>
Subject: [PATCH v2 13/14] drivers: clk: st: Update frequency tables for fs660c32 and fs432c65
Date: Fri, 27 Jun 2014 15:25:10 +0200 [thread overview]
Message-ID: <1403875511-7710-14-git-send-email-gabriel.fernandez@linaro.org> (raw)
In-Reply-To: <1403875511-7710-1-git-send-email-gabriel.fernandez@linaro.org>
This patch extend the range of possible frequencies of the fs432c65
and fs660c32 Quad frequency synthesizers.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: Peter Griffin <peter.griffin@linaro.org>
---
drivers/clk/st/clkgen-fsyn.c | 67 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 59 insertions(+), 8 deletions(-)
diff --git a/drivers/clk/st/clkgen-fsyn.c b/drivers/clk/st/clkgen-fsyn.c
index 2b6cb1c..b4a3e50 100644
--- a/drivers/clk/st/clkgen-fsyn.c
+++ b/drivers/clk/st/clkgen-fsyn.c
@@ -50,17 +50,68 @@ static const struct stm_fs fs216c65_rtbl[] = {
};
static const struct stm_fs fs432c65_rtbl[] = {
- { .mdiv = 0x1f, .pe = 0x0, .sdiv = 0x7, .nsdiv = 0 }, /* 625 Khz */
- { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x2, .nsdiv = 1 }, /* 108 MHz */
- { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x0, .nsdiv = 1 }, /* 297 MHz */
+ { .mdiv = 0x1f, .pe = 0x0, .sdiv = 0x7, .nsdiv = 0 }, /* 625 Khz */
+ { .mdiv = 0x13, .pe = 0x777c, .sdiv = 0x4, .nsdiv = 1 }, /* 25.175 MHz */
+ { .mdiv = 0x19, .pe = 0x4d35, .sdiv = 0x2, .nsdiv = 0 }, /* 25.200 MHz */
+ { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x4, .nsdiv = 1 }, /* 27.000 MHz */
+ { .mdiv = 0x17, .pe = 0x28f5, .sdiv = 0x2, .nsdiv = 0 }, /* 27.027 MHz */
+ { .mdiv = 0x16, .pe = 0x3359, .sdiv = 0x2, .nsdiv = 0 }, /* 28.320 MHz */
+ { .mdiv = 0x1f, .pe = 0x2083, .sdiv = 0x3, .nsdiv = 1 }, /* 30.240 MHz */
+ { .mdiv = 0x1e, .pe = 0x430d, .sdiv = 0x3, .nsdiv = 1 }, /* 31.500 MHz */
+ { .mdiv = 0x17, .pe = 0x0, .sdiv = 0x3, .nsdiv = 1 }, /* 40.000 MHz */
+ { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x1, .nsdiv = 0 }, /* 49.500 MHz */
+ { .mdiv = 0x13, .pe = 0x6667, .sdiv = 0x3, .nsdiv = 1 }, /* 50.000 MHz */
+ { .mdiv = 0x10, .pe = 0x1ee6, .sdiv = 0x3, .nsdiv = 1 }, /* 57.284 MHz */
+ { .mdiv = 0x1d, .pe = 0x3b14, .sdiv = 0x2, .nsdiv = 1 }, /* 65.000 MHz */
+ { .mdiv = 0x12, .pe = 0x7c65, .sdiv = 0x1, .nsdiv = 0 }, /* 71.000 MHz */
+ { .mdiv = 0x19, .pe = 0xecd, .sdiv = 0x2, .nsdiv = 1 }, /* 74.176 MHz */
+ { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x2, .nsdiv = 1 }, /* 74.250 MHz */
+ { .mdiv = 0x19, .pe = 0x3334, .sdiv = 0x2, .nsdiv = 1 }, /* 75.000 MHz */
+ { .mdiv = 0x18, .pe = 0x5138, .sdiv = 0x2, .nsdiv = 1 }, /* 78.800 MHz */
+ { .mdiv = 0x1d, .pe = 0x77d, .sdiv = 0x0, .nsdiv = 0 }, /* 85.500 MHz */
+ { .mdiv = 0x1c, .pe = 0x13d5, .sdiv = 0x0, .nsdiv = 0 }, /* 88.750 MHz */
+ { .mdiv = 0x11, .pe = 0x1c72, .sdiv = 0x2, .nsdiv = 1 }, /* 108.000 MHz */
+ { .mdiv = 0x17, .pe = 0x28f5, .sdiv = 0x0, .nsdiv = 0 }, /* 108.108 MHz */
+ { .mdiv = 0x10, .pe = 0x6e26, .sdiv = 0x2, .nsdiv = 1 }, /* 118.963 MHz */
+ { .mdiv = 0x15, .pe = 0x3e63, .sdiv = 0x0, .nsdiv = 0 }, /* 119.000 MHz */
+ { .mdiv = 0x1c, .pe = 0x471d, .sdiv = 0x1, .nsdiv = 1 }, /* 135.000 MHz */
+ { .mdiv = 0x19, .pe = 0xecd, .sdiv = 0x1, .nsdiv = 1 }, /* 148.352 MHz */
+ { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x1, .nsdiv = 1 }, /* 148.500 MHz */
+ { .mdiv = 0x19, .pe = 0x121a, .sdiv = 0x0, .nsdiv = 1 }, /* 297 MHz */
};
static const struct stm_fs fs660c32_rtbl[] = {
- { .mdiv = 0x01, .pe = 0x2aaa, .sdiv = 0x8, .nsdiv = 0 }, /* 600 KHz */
- { .mdiv = 0x02, .pe = 0x3d33, .sdiv = 0x0, .nsdiv = 0 }, /* 148.5 Mhz */
- { .mdiv = 0x13, .pe = 0x5bcc, .sdiv = 0x0, .nsdiv = 1 }, /* 297 Mhz */
- { .mdiv = 0x0e, .pe = 0x1025, .sdiv = 0x0, .nsdiv = 1 }, /* 333 Mhz */
- { .mdiv = 0x0b, .pe = 0x715f, .sdiv = 0x0, .nsdiv = 1 }, /* 350 Mhz */
+ { .mdiv = 0x14, .pe = 0x376b, .sdiv = 0x4, .nsdiv = 1 }, /* 25.175 MHz */
+ { .mdiv = 0x14, .pe = 0x30c3, .sdiv = 0x4, .nsdiv = 1 }, /* 25.200 MHz */
+ { .mdiv = 0x10, .pe = 0x71c7, .sdiv = 0x4, .nsdiv = 1 }, /* 27.000 MHz */
+ { .mdiv = 0x00, .pe = 0x47af, .sdiv = 0x3, .nsdiv = 0 }, /* 27.027 MHz */
+ { .mdiv = 0x0e, .pe = 0x4e1a, .sdiv = 0x4, .nsdiv = 1 }, /* 28.320 MHz */
+ { .mdiv = 0x0b, .pe = 0x534d, .sdiv = 0x4, .nsdiv = 1 }, /* 30.240 MHz */
+ { .mdiv = 0x17, .pe = 0x6fbf, .sdiv = 0x2, .nsdiv = 0 }, /* 31.500 MHz */
+ { .mdiv = 0x01, .pe = 0x0, .sdiv = 0x4, .nsdiv = 1 }, /* 40.000 MHz */
+ { .mdiv = 0x15, .pe = 0x2aab, .sdiv = 0x3, .nsdiv = 1 }, /* 49.500 MHz */
+ { .mdiv = 0x14, .pe = 0x6666, .sdiv = 0x3, .nsdiv = 1 }, /* 50.000 MHz */
+ { .mdiv = 0x1d, .pe = 0x395f, .sdiv = 0x1, .nsdiv = 0 }, /* 57.284 MHz */
+ { .mdiv = 0x08, .pe = 0x4ec5, .sdiv = 0x3, .nsdiv = 1 }, /* 65.000 MHz */
+ { .mdiv = 0x05, .pe = 0x1770, .sdiv = 0x3, .nsdiv = 1 }, /* 71.000 MHz */
+ { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x3, .nsdiv = 1 }, /* 74.176 MHz */
+ { .mdiv = 0x0f, .pe = 0x3426, .sdiv = 0x1, .nsdiv = 0 }, /* 74.250 MHz */
+ { .mdiv = 0x0e, .pe = 0x7777, .sdiv = 0x1, .nsdiv = 0 }, /* 75.000 MHz */
+ { .mdiv = 0x01, .pe = 0x4053, .sdiv = 0x3, .nsdiv = 1 }, /* 78.800 MHz */
+ { .mdiv = 0x09, .pe = 0x15b5, .sdiv = 0x1, .nsdiv = 0 }, /* 85.500 MHz */
+ { .mdiv = 0x1b, .pe = 0x3f19, .sdiv = 0x2, .nsdiv = 1 }, /* 88.750 MHz */
+ { .mdiv = 0x10, .pe = 0x71c7, .sdiv = 0x2, .nsdiv = 1 }, /* 108.000 MHz */
+ { .mdiv = 0x00, .pe = 0x47af, .sdiv = 0x1, .nsdiv = 0 }, /* 108.108 MHz */
+ { .mdiv = 0x0c, .pe = 0x3118, .sdiv = 0x2, .nsdiv = 1 }, /* 118.963 MHz */
+ { .mdiv = 0x0c, .pe = 0x2f54, .sdiv = 0x2, .nsdiv = 1 }, /* 119.000 MHz */
+ { .mdiv = 0x07, .pe = 0xe39, .sdiv = 0x2, .nsdiv = 1 }, /* 135.000 MHz */
+ { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x2, .nsdiv = 1 }, /* 148.352 MHz */
+ { .mdiv = 0x0f, .pe = 0x3426, .sdiv = 0x0, .nsdiv = 0 }, /* 148.500 MHz */
+ { .mdiv = 0x03, .pe = 0x4ba7, .sdiv = 0x1, .nsdiv = 1 }, /* 296.704 MHz */
+ { .mdiv = 0x03, .pe = 0x471c, .sdiv = 0x1, .nsdiv = 1 }, /* 297.000 MHz */
+ { .mdiv = 0x00, .pe = 0x295f, .sdiv = 0x1, .nsdiv = 1 }, /* 326.700 MHz */
+ { .mdiv = 0x1f, .pe = 0x3633, .sdiv = 0x0, .nsdiv = 1 }, /* 333.000 MHz */
+ { .mdiv = 0x1c, .pe = 0x0, .sdiv = 0x0, .nsdiv = 1 }, /* 352.000 Mhz */
};
struct clkgen_quadfs_data {
--
1.9.1
next prev parent reply other threads:[~2014-06-27 13:25 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-27 13:24 [PATCH v2 00/14] Add Flexgen Clock support Gabriel FERNANDEZ
2014-06-27 13:24 ` [PATCH v2 01/14] clk: st: Update ST clock binding documentation Gabriel FERNANDEZ
2014-06-30 9:23 ` Mark Rutland
2014-07-01 12:11 ` Gabriel Fernandez
2014-06-27 13:24 ` [PATCH v2 02/14] drivers: clk: st: use static const for stm_fs tables Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 03/14] drivers: clk: st: use static const for clkgen_pll_data tables Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 04/14] clk: st: Adds Flexgen clock binding Gabriel FERNANDEZ
2014-06-30 9:26 ` Mark Rutland
2014-07-01 12:11 ` Gabriel Fernandez
[not found] ` <1403875511-7710-1-git-send-email-gabriel.fernandez-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-06-27 13:25 ` [PATCH v2 05/14] drivers: clk: st: STiH407: Support for Flexgen Clocks Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 06/14] drivers: clk: st: STiH407: Support for A9 MUX Clocks Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 07/14] drivers: clk: st: STiH407: Support for clockgenA0 Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 08/14] drivers: clk: st: Add polarity bit indication Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 09/14] drivers: clk: st: Add quadfs reset handling Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 10/14] drivers: clk: st: STiH407: Support for clockgenC0 Gabriel FERNANDEZ
2014-06-30 9:30 ` Mark Rutland
2014-07-01 12:11 ` Gabriel Fernandez
2014-06-27 13:25 ` [PATCH v2 11/14] drivers: clk: st: STiH407: Support for clockgenD0/D2/D3 Gabriel FERNANDEZ
2014-06-27 13:25 ` [PATCH v2 12/14] drivers: clk: st: STiH407: Support for clockgenA9 Gabriel FERNANDEZ
2014-06-27 13:25 ` Gabriel FERNANDEZ [this message]
2014-06-27 13:25 ` [PATCH v2 14/14] drivers: clk: st: Use round to closest divider flag Gabriel FERNANDEZ
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1403875511-7710-14-git-send-email-gabriel.fernandez@linaro.org \
--to=gabriel.fernandez@st.com \
--cc=devicetree@vger.kernel.org \
--cc=gabriel.fernandez@linaro.org \
--cc=galak@codeaurora.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=kernel@stlinux.com \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mturquette@linaro.org \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).