From: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
maxime.coquelin-qxv4g6HH51o@public.gmane.org,
patrice.chotard-qxv4g6HH51o@public.gmane.org,
srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
balbi-l0cyMroinI0@public.gmane.org,
linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>
Subject: [PATCH 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation
Date: Fri, 4 Jul 2014 12:13:51 +0100 [thread overview]
Message-ID: <1404472432-24764-3-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1404472432-24764-1-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
This patch documents the device tree documentation required for
the ST usb3 controller glue layer found in STiH407 devices.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro-qxv4g6HH51o@public.gmane.org>
Signed-off-by: Peter Griffin <peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
Documentation/devicetree/bindings/usb/dwc3-st.txt | 58 +++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt b/Documentation/devicetree/bindings/usb/dwc3-st.txt
new file mode 100644
index 0000000..f14e5da
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -0,0 +1,58 @@
+ST DWC3 glue logic
+
+This file documents the parameters for the dwc3-st driver.
+This driver provides the glue logic to use the dwc3 on STiH407 based platforms.
+
+Required properties:
+ - compatible : must be "st,stih407-dwc3"
+ - reg : glue logic base address and USB syscfg ctrl register offest
+ - reg-names : Should be "reg-glue" and "syscfg-reg".
+ - st,syscon : should be phandle to system configuration node which
+ encompases the glue registers.
+ - resets : phandle pointing to the system powerdown controller
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property.
+
+ - pinctl-names : A pinctrl state named "default" must be defined.
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt.
+
+ - pinctrl-0 : Pin control group
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt.
+
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space.
+
+Optional properties:
+ - st,dwc3-drd-device: to program the HC as "device" (static setup)
+
+Sub-nodes:
+The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+
+st_dwc3: dwc3@8f94000 {
+ status = "disabled";
+ compatible = "st,stih407-dwc3";
+ reg = <0x08f94000 0x1000>, <0x110 0x4>;
+ reg-names = "reg-glue", "syscfg-reg";
+ st,syscfg = <&syscfg_core>;
+ resets = <&powerdown STIH407_USB3_POWERDOWN>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ ranges;
+
+ dwc3: dwc3@9900000 {
+ compatible = "synopsys,dwc3";
+ reg = <0x09900000 0x100000>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+
+ usb-phy = <&usb2_phy>, <&usb3_phy>;
+ };
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-04 11:13 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 11:13 [PATCH 0/3] Add ST dwc3 glue layer driver Peter Griffin
2014-07-04 11:13 ` [PATCH 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC Peter Griffin
2014-07-04 12:27 ` Daniele Forsi
2014-07-05 5:56 ` Peter Griffin
[not found] ` <1404472432-24764-1-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-07-04 11:13 ` Peter Griffin [this message]
[not found] ` <1404472432-24764-3-git-send-email-peter.griffin-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-07-04 12:25 ` [PATCH 2/3] ARM: dts: sti: Add st-dwc3 devicetree bindings documentation Daniele Forsi
2014-07-05 6:14 ` Peter Griffin
2014-07-04 11:13 ` [PATCH 3/3] MAINTAINERS: Add dwc3-st.c file to ARCH/STI architecture Peter Griffin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404472432-24764-3-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=balbi-l0cyMroinI0@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=maxime.coquelin-qxv4g6HH51o@public.gmane.org \
--cc=patrice.chotard-qxv4g6HH51o@public.gmane.org \
--cc=peppe.cavallaro-qxv4g6HH51o@public.gmane.org \
--cc=srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).