devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
To: Lee Jones <lee.jones@linaro.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Kukjin Kim <kgene.kim@samsung.com>,
	Mike Turquette <mturquette@linaro.org>,
	Tomeu Vizoso <tomeu.vizoso@collabora.com>,
	devicetree@vger.kernel.org,
	Yadwinder Singh Brar <yadi.brar01@gmail.com>,
	linux-kernel@vger.kernel.org, Liam Girdwood <lgirdwood@gmail.com>,
	Doug Anderson <dianders@chromium.org>,
	Tushar Behera <trblinux@gmail.com>,
	Mark Brown <broonie@kernel.org>,
	linux-samsung-soc@vger.kernel.org,
	Olof Johansson <olof@lixom.net>,
	Andreas Farber <afaerber@suse.de>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 09/24] rtc: max77686: Allow the max77686 rtc to wakeup the system
Date: Fri,  4 Jul 2014 22:24:12 +0200	[thread overview]
Message-ID: <1404505467-26526-10-git-send-email-javier.martinez@collabora.co.uk> (raw)
In-Reply-To: <1404505467-26526-1-git-send-email-javier.martinez@collabora.co.uk>

From: Doug Anderson <dianders@chromium.org>

The max77686 includes an RTC that keeps power during suspend.  It's
convenient to be able to use it as a wakeup source.

NOTE: due to wakeup ordering problems this patch alone doesn't work so
well on exynos5250-snow.  You also need something that brings the i2c
bus up before the max77686 wakeup runs.

Signed-off-by: Doug Anderson <dianders@chromium.org>
Reviewed-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---

Changes since v6: None

Changes since v5:
 - Fix $SUBJECT since the patch does not actually touch the mfd subsys.
   Suggested by Lee Jones.

Changes since v4: None

Changes since v3:
 - Keep the note that this patch needs another change due wakeup
   ordering problems.
---
 drivers/rtc/rtc-max77686.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
index d20a7f0..c1c6055 100644
--- a/drivers/rtc/rtc-max77686.c
+++ b/drivers/rtc/rtc-max77686.c
@@ -583,6 +583,33 @@ static void max77686_rtc_shutdown(struct platform_device *pdev)
 #endif /* MAX77686_RTC_WTSR_SMPL */
 }
 
+#ifdef CONFIG_PM_SLEEP
+static int max77686_rtc_suspend(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return enable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+
+static int max77686_rtc_resume(struct device *dev)
+{
+	if (device_may_wakeup(dev)) {
+		struct max77686_rtc_info *info = dev_get_drvdata(dev);
+
+		return disable_irq_wake(info->virq);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(max77686_rtc_pm_ops,
+			 max77686_rtc_suspend, max77686_rtc_resume);
+
 static const struct platform_device_id rtc_id[] = {
 	{ "max77686-rtc", 0 },
 	{},
@@ -592,6 +619,7 @@ static struct platform_driver max77686_rtc_driver = {
 	.driver		= {
 		.name	= "max77686-rtc",
 		.owner	= THIS_MODULE,
+		.pm	= &max77686_rtc_pm_ops,
 	},
 	.probe		= max77686_rtc_probe,
 	.shutdown	= max77686_rtc_shutdown,
-- 
2.0.0.rc2

  parent reply	other threads:[~2014-07-04 20:24 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-04 20:24 [PATCH v7 00/24] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 01/24] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-18  8:17   ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 02/24] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-09 14:44   ` Lee Jones
2014-07-18  8:17   ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 03/24] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-09 14:50   ` Lee Jones
     [not found]   ` <1404505467-26526-4-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-18  8:17     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 04/24] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-09 14:52   ` Lee Jones
2014-07-09 18:15     ` Javier Martinez Canillas
2014-07-18  8:17   ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 05/24] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-09 14:53   ` Lee Jones
2014-07-18  8:18   ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 06/24] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-09 14:54   ` Lee Jones
2014-07-18  8:18   ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 07/24] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
     [not found]   ` <1404505467-26526-8-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-18  8:18     ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 08/24] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-09 15:13   ` Lee Jones
2014-07-09 18:40     ` Javier Martinez Canillas
     [not found]   ` <1404505467-26526-9-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-10  9:46     ` Linus Walleij
2014-07-11  0:51       ` Javier Martinez Canillas
2014-07-10  9:59   ` amit daniel kachhap
2014-07-11  1:45     ` Javier Martinez Canillas
2014-07-11  4:02       ` Doug Anderson
2014-07-11  9:37       ` amit daniel kachhap
2014-07-11  9:43       ` Tomasz Figa
2014-07-11 10:15         ` Javier Martinez Canillas
2014-07-04 20:24 ` Javier Martinez Canillas [this message]
2014-07-04 20:24 ` [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR Javier Martinez Canillas
2014-07-07  6:09   ` Krzysztof Kozlowski
2014-07-04 20:24 ` [PATCH v7 11/24] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 13/24] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 15/24] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 16/24] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 17/24] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 18/24] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-09 15:31   ` Lee Jones
2014-07-09 18:43     ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 19/24] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 20/24] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 21/24] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 22/24] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-07  6:06   ` Krzysztof Kozlowski
2014-07-07  6:57     ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 24/24] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404505467-26526-10-git-send-email-javier.martinez@collabora.co.uk \
    --to=javier.martinez@collabora.co.uk \
    --cc=a.zummo@towertech.it \
    --cc=afaerber@suse.de \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=k.kozlowski@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=mturquette@linaro.org \
    --cc=olof@lixom.net \
    --cc=tomeu.vizoso@collabora.com \
    --cc=trblinux@gmail.com \
    --cc=yadi.brar01@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).