From: Krzysztof Kozlowski <k.kozlowski@samsung.com>
To: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Cc: Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
Mike Turquette <mturquette@linaro.org>,
Liam Girdwood <lgirdwood@gmail.com>,
Alessandro Zummo <a.zummo@towertech.it>,
Kukjin Kim <kgene.kim@samsung.com>,
Doug Anderson <dianders@chromium.org>,
Olof Johansson <olof@lixom.net>,
Tomeu Vizoso <tomeu.vizoso@collabora.com>,
Yadwinder Singh Brar <yadi.brar01@gmail.com>,
Tushar Behera <trblinux@gmail.com>,
Andreas Farber <afaerber@suse.de>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-samsung-soc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR.
Date: Mon, 07 Jul 2014 08:09:28 +0200 [thread overview]
Message-ID: <1404713368.4367.1.camel@AMDC1943> (raw)
In-Reply-To: <1404505467-26526-11-git-send-email-javier.martinez@collabora.co.uk>
On pią, 2014-07-04 at 22:24 +0200, Javier Martinez Canillas wrote:
> The MAX77686 RTC chip has two features called SMPL (Sudden Momentary
> Power Loss) and WTSR (Watchdog Timeout and Software Resets).
> Support for these features seems to be implemented in the driver but
> compilation is disabled using a C pre-processor conditional.
>
> This code has been disabled since the driver was original merged in
> commit fca1dd03 ("rtc: max77686: add Maxim 77686 driver").
>
> So, since this code has never been built, let's just remove it.
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
> ---
> drivers/rtc/rtc-max77686.c | 101 ---------------------------------------------
> 1 file changed, 101 deletions(-)
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Best regards,
Krzysztof
>
> diff --git a/drivers/rtc/rtc-max77686.c b/drivers/rtc/rtc-max77686.c
> index c1c6055..7bb5433 100644
> --- a/drivers/rtc/rtc-max77686.c
> +++ b/drivers/rtc/rtc-max77686.c
> @@ -32,15 +32,6 @@
> #define RTC_UDR_MASK (1 << RTC_UDR_SHIFT)
> #define RTC_RBUDR_SHIFT 4
> #define RTC_RBUDR_MASK (1 << RTC_RBUDR_SHIFT)
> -/* WTSR and SMPL Register */
> -#define WTSRT_SHIFT 0
> -#define SMPLT_SHIFT 2
> -#define WTSR_EN_SHIFT 6
> -#define SMPL_EN_SHIFT 7
> -#define WTSRT_MASK (3 << WTSRT_SHIFT)
> -#define SMPLT_MASK (3 << SMPLT_SHIFT)
> -#define WTSR_EN_MASK (1 << WTSR_EN_SHIFT)
> -#define SMPL_EN_MASK (1 << SMPL_EN_SHIFT)
> /* RTC Hour register */
> #define HOUR_PM_SHIFT 6
> #define HOUR_PM_MASK (1 << HOUR_PM_SHIFT)
> @@ -49,7 +40,6 @@
> #define ALARM_ENABLE_MASK (1 << ALARM_ENABLE_SHIFT)
>
> #define MAX77686_RTC_UPDATE_DELAY 16
> -#undef MAX77686_RTC_WTSR_SMPL
>
> enum {
> RTC_SEC = 0,
> @@ -412,64 +402,6 @@ static const struct rtc_class_ops max77686_rtc_ops = {
> .alarm_irq_enable = max77686_rtc_alarm_irq_enable,
> };
>
> -#ifdef MAX77686_RTC_WTSR_SMPL
> -static void max77686_rtc_enable_wtsr(struct max77686_rtc_info *info, bool enable)
> -{
> - int ret;
> - unsigned int val, mask;
> -
> - if (enable)
> - val = (1 << WTSR_EN_SHIFT) | (3 << WTSRT_SHIFT);
> - else
> - val = 0;
> -
> - mask = WTSR_EN_MASK | WTSRT_MASK;
> -
> - dev_info(info->dev, "%s: %s WTSR\n", __func__,
> - enable ? "enable" : "disable");
> -
> - ret = regmap_update_bits(info->max77686->rtc_regmap,
> - MAX77686_WTSR_SMPL_CNTL, mask, val);
> - if (ret < 0) {
> - dev_err(info->dev, "%s: fail to update WTSR reg(%d)\n",
> - __func__, ret);
> - return;
> - }
> -
> - max77686_rtc_update(info, MAX77686_RTC_WRITE);
> -}
> -
> -static void max77686_rtc_enable_smpl(struct max77686_rtc_info *info, bool enable)
> -{
> - int ret;
> - unsigned int val, mask;
> -
> - if (enable)
> - val = (1 << SMPL_EN_SHIFT) | (0 << SMPLT_SHIFT);
> - else
> - val = 0;
> -
> - mask = SMPL_EN_MASK | SMPLT_MASK;
> -
> - dev_info(info->dev, "%s: %s SMPL\n", __func__,
> - enable ? "enable" : "disable");
> -
> - ret = regmap_update_bits(info->max77686->rtc_regmap,
> - MAX77686_WTSR_SMPL_CNTL, mask, val);
> - if (ret < 0) {
> - dev_err(info->dev, "%s: fail to update SMPL reg(%d)\n",
> - __func__, ret);
> - return;
> - }
> -
> - max77686_rtc_update(info, MAX77686_RTC_WRITE);
> -
> - val = 0;
> - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
> - dev_info(info->dev, "%s: WTSR_SMPL(0x%02x)\n", __func__, val);
> -}
> -#endif /* MAX77686_RTC_WTSR_SMPL */
> -
> static int max77686_rtc_init_reg(struct max77686_rtc_info *info)
> {
> u8 data[2];
> @@ -519,11 +451,6 @@ static int max77686_rtc_probe(struct platform_device *pdev)
> goto err_rtc;
> }
>
> -#ifdef MAX77686_RTC_WTSR_SMPL
> - max77686_rtc_enable_wtsr(info, true);
> - max77686_rtc_enable_smpl(info, true);
> -#endif
> -
> device_init_wakeup(&pdev->dev, 1);
>
> info->rtc_dev = devm_rtc_device_register(&pdev->dev, "max77686-rtc",
> @@ -556,33 +483,6 @@ err_rtc:
> return ret;
> }
>
> -static void max77686_rtc_shutdown(struct platform_device *pdev)
> -{
> -#ifdef MAX77686_RTC_WTSR_SMPL
> - struct max77686_rtc_info *info = platform_get_drvdata(pdev);
> - int i;
> - u8 val = 0;
> -
> - for (i = 0; i < 3; i++) {
> - max77686_rtc_enable_wtsr(info, false);
> - regmap_read(info->max77686->rtc_regmap, MAX77686_WTSR_SMPL_CNTL, &val);
> - dev_info(info->dev, "%s: WTSR_SMPL reg(0x%02x)\n", __func__,
> - val);
> - if (val & WTSR_EN_MASK) {
> - dev_emerg(info->dev, "%s: fail to disable WTSR\n",
> - __func__);
> - } else {
> - dev_info(info->dev, "%s: success to disable WTSR\n",
> - __func__);
> - break;
> - }
> - }
> -
> - /* Disable SMPL when power off */
> - max77686_rtc_enable_smpl(info, false);
> -#endif /* MAX77686_RTC_WTSR_SMPL */
> -}
> -
> #ifdef CONFIG_PM_SLEEP
> static int max77686_rtc_suspend(struct device *dev)
> {
> @@ -622,7 +522,6 @@ static struct platform_driver max77686_rtc_driver = {
> .pm = &max77686_rtc_pm_ops,
> },
> .probe = max77686_rtc_probe,
> - .shutdown = max77686_rtc_shutdown,
> .id_table = rtc_id,
> };
>
next prev parent reply other threads:[~2014-07-07 6:09 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-04 20:24 [PATCH v7 00/24] Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 01/24] mfd: max77686: Convert to use regmap_irq Javier Martinez Canillas
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 02/24] mfd: max77686: Add power management support Javier Martinez Canillas
2014-07-09 14:44 ` Lee Jones
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 03/24] mfd: max77686: Don't define dummy function if OF isn't enabled Javier Martinez Canillas
2014-07-09 14:50 ` Lee Jones
[not found] ` <1404505467-26526-4-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 04/24] mfd: max77686: Make platform data over-rule DT Javier Martinez Canillas
2014-07-09 14:52 ` Lee Jones
2014-07-09 18:15 ` Javier Martinez Canillas
2014-07-18 8:17 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 05/24] mfd: max77686: Return correct error when pdata isn't found Javier Martinez Canillas
2014-07-09 14:53 ` Lee Jones
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 06/24] mfd: max77686: Make error checking consistent Javier Martinez Canillas
2014-07-09 14:54 ` Lee Jones
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 07/24] mfd: max77686: Remove unneeded OOM error message Javier Martinez Canillas
[not found] ` <1404505467-26526-8-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-18 8:18 ` Lee Jones
2014-07-04 20:24 ` [PATCH v7 08/24] mfd: max77686: Add Dynamic Voltage Scaling (DVS) support Javier Martinez Canillas
2014-07-09 15:13 ` Lee Jones
2014-07-09 18:40 ` Javier Martinez Canillas
[not found] ` <1404505467-26526-9-git-send-email-javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
2014-07-10 9:46 ` Linus Walleij
2014-07-11 0:51 ` Javier Martinez Canillas
2014-07-10 9:59 ` amit daniel kachhap
2014-07-11 1:45 ` Javier Martinez Canillas
2014-07-11 4:02 ` Doug Anderson
2014-07-11 9:37 ` amit daniel kachhap
2014-07-11 9:43 ` Tomasz Figa
2014-07-11 10:15 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 09/24] rtc: max77686: Allow the max77686 rtc to wakeup the system Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 10/24] rtc: max77686: Remove dead code for SMPL and WTSR Javier Martinez Canillas
2014-07-07 6:09 ` Krzysztof Kozlowski [this message]
2014-07-04 20:24 ` [PATCH v7 11/24] clk: max77686: Add DT include for MAX77686 PMIC clock Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 12/24] clk: Add generic driver for Maxim PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 13/24] clk: max77686: Convert to the generic max clock driver Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 14/24] clk: max77686: Improve Maxim 77686 PMIC clocks binding Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 15/24] regmap: Add regmap_reg_copy function Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 16/24] regulator: max77686: Setup DVS-related GPIOs on probe Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 17/24] mfd: max77686: Add documentation for DVS bindings Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 18/24] mfd: max77686: Add Maxim 77802 PMIC support Javier Martinez Canillas
2014-07-09 15:31 ` Lee Jones
2014-07-09 18:43 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 19/24] mfd: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 20/24] regulator: Add driver for Maxim 77802 PMIC regulators Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 21/24] clk: Add driver for Maxim 77802 PMIC clocks Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 22/24] clk: max77802: Add DT binding documentation Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 23/24] rtc: Add driver for Maxim 77802 PMIC Real-Time-Clock Javier Martinez Canillas
2014-07-07 6:06 ` Krzysztof Kozlowski
2014-07-07 6:57 ` Javier Martinez Canillas
2014-07-04 20:24 ` [PATCH v7 24/24] ARM: dts: Add max77802 to exynos5420-peach-pit and exynos5800-peach-pi Javier Martinez Canillas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404713368.4367.1.camel@AMDC1943 \
--to=k.kozlowski@samsung.com \
--cc=a.zummo@towertech.it \
--cc=afaerber@suse.de \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dianders@chromium.org \
--cc=javier.martinez@collabora.co.uk \
--cc=kgene.kim@samsung.com \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-samsung-soc@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=olof@lixom.net \
--cc=tomeu.vizoso@collabora.com \
--cc=trblinux@gmail.com \
--cc=yadi.brar01@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).