From mboxrd@z Thu Jan 1 00:00:00 1970 From: YoungJun Cho Subject: [PATCH v5 09/14] ARM: dts: s6e3fa0: add DT bindings Date: Tue, 08 Jul 2014 09:39:42 +0900 Message-ID: <1404779987-5337-10-git-send-email-yj44.cho@samsung.com> References: <1404779987-5337-1-git-send-email-yj44.cho@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <1404779987-5337-1-git-send-email-yj44.cho@samsung.com> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" To: airlied@linux.ie, dri-devel@lists.freedesktop.org Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, linux-samsung-soc@vger.kernel.org, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, sw0312.kim@samsung.com, a.hajda@samsung.com, kyungmin.park@samsung.com, robh+dt@kernel.org, galak@codeaurora.org, kgene.kim@samsung.com List-Id: devicetree@vger.kernel.org This patch adds DT bindings for s6e3fa0 panel. The bindings describes panel resources and display timings. Signed-off-by: YoungJun Cho Acked-by: Inki Dae Acked-by: Kyungmin Park --- .../devicetree/bindings/panel/samsung,s6e3fa0.txt | 46 ++++++++++++++++++++++ 1 file changed, 46 insertions(+) create mode 100644 Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt diff --git a/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt new file mode 100644 index 0000000..2cd32f5 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/samsung,s6e3fa0.txt @@ -0,0 +1,46 @@ +Samsung S6E3FA0 AMOLED LCD 5.7 inch panel + +Required properties: + - compatible: "samsung,s6e3fa0" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: core voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin + - det-gpios: a GPIO spec for the OLED detection pin + - te-gpios: a GPIO spec for the TE pin + - display-timings: timings for the connected panel as described by [1] + +Optional properties: + +The device node can contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in [2]. This node should describe +panel's video bus. + +[1]: Documentation/devicetree/bindings/video/display-timing.txt +[2]: Documentation/devicetree/bindings/media/video-interfaces.txt + +Example: + + panel@0 { + compatible = "samsung,s6e3fa0"; + reg = <0>; + vdd3-supply = <&vcclcd_reg>; + vci-supply = <&vlcd_reg>; + reset-gpios = <&gpy7 4 0>; + det-gpios = <&gpg0 6 0>; + te-gpios = <&gpd1 7 0>; + + display-timings { + timings0 { + clock-frequency = <0>; + hactive = <1080>; + vactive = <1920>; + hfront-porch = <2>; + hback-porch = <2>; + hsync-len = <1>; + vfront-porch = <1>; + vback-porch = <4>; + vsync-len = <1>; + }; + }; + }; -- 1.9.0