From: Tuomas Tynkkynen <ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
To: linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>,
Thierry Reding
<thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
Peter De Schrijver
<pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Prashant Gaikwad
<pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>,
Mike Turquette
<mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
"Rafael J. Wysocki" <rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org>,
Viresh Kumar
<viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
Tuomas Tynkkynen
<ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Subject: [PATCH 10/13] ARM: tegra: Enable the DFLL on the Jetson TK1
Date: Fri, 11 Jul 2014 00:42:46 +0300 [thread overview]
Message-ID: <1405028569-14253-11-git-send-email-ttynkkynen@nvidia.com> (raw)
In-Reply-To: <1405028569-14253-1-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
Add the board-specific properties of the DFLL for the Jetson TK1 board.
On this board, the DFLL will take control of the sd0 regulator on the
on-board AS3722 PMIC.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
---
arch/arm/boot/dts/tegra124-jetson-tk1.dts | 83 ++++++++++++++++++++++++++++++-
1 file changed, 82 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
index 89a772d..2dfd516 100644
--- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts
+++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts
@@ -1453,7 +1453,7 @@
vin-ldo9-10-supply = <&vdd_5v0_sys>;
vin-ldo11-supply = <&vdd_3v3_run>;
- sd0 {
+ vdd_cpu: sd0 {
regulator-name = "+VDD_CPU_AP";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1400000>;
@@ -1636,6 +1636,87 @@
non-removable;
};
+ dfll@0,70110000 {
+ status = "okay";
+ vdd_cpu-supply = <&vdd_cpu>;
+ nvidia,i2c-fs-rate = <400000>;
+ nvidia,pmic-i2c-address = <0x40>;
+ nvidia,pmic-i2c-voltage-register = <0x00>;
+
+ nvidia,pmic-voltage-table =
+ <0x1e 700000>,
+ <0x1f 710000>,
+ <0x20 720000>,
+ <0x21 730000>,
+ <0x22 740000>,
+ <0x23 750000>,
+ <0x24 760000>,
+ <0x25 770000>,
+ <0x26 780000>,
+ <0x27 790000>,
+ <0x28 800000>,
+ <0x29 810000>,
+ <0x2a 820000>,
+ <0x2b 830000>,
+ <0x2c 840000>,
+ <0x2d 850000>,
+ <0x2e 860000>,
+ <0x2f 870000>,
+ <0x30 880000>,
+ <0x31 890000>,
+ <0x32 900000>,
+ <0x33 910000>,
+ <0x34 920000>,
+ <0x35 930000>,
+ <0x36 940000>,
+ <0x37 950000>,
+ <0x38 960000>,
+ <0x39 970000>,
+ <0x3a 980000>,
+ <0x3b 990000>,
+ <0x3c 1000000>,
+ <0x3d 1010000>,
+ <0x3e 1020000>,
+ <0x3f 1030000>,
+ <0x40 1040000>,
+ <0x41 1050000>,
+ <0x42 1060000>,
+ <0x43 1070000>,
+ <0x44 1080000>,
+ <0x45 1090000>,
+ <0x46 1100000>,
+ <0x47 1110000>,
+ <0x48 1120000>,
+ <0x49 1130000>,
+ <0x4a 1140000>,
+ <0x4b 1150000>,
+ <0x4c 1160000>,
+ <0x4d 1170000>,
+ <0x4e 1180000>,
+ <0x4f 1190000>,
+ <0x50 1200000>,
+ <0x51 1210000>,
+ <0x52 1220000>,
+ <0x53 1230000>,
+ <0x54 1240000>,
+ <0x55 1250000>,
+ <0x56 1260000>,
+ <0x57 1270000>,
+ <0x58 1280000>,
+ <0x59 1290000>,
+ <0x5a 1300000>,
+ <0x5b 1310000>,
+ <0x5c 1320000>,
+ <0x5d 1330000>,
+ <0x5e 1340000>,
+ <0x5f 1350000>,
+ <0x60 1360000>,
+ <0x61 1370000>,
+ <0x62 1380000>,
+ <0x63 1390000>,
+ <0x64 1400000>;
+ };
+
ahub@0,70300000 {
i2s@0,70301100 {
status = "okay";
--
1.8.1.5
next prev parent reply other threads:[~2014-07-10 21:42 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 21:42 [PATCH 00/13] Tegra124 CL-DVFS / DFLL clocksource, plus cpufreq Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 01/13] clk: tegra: Add binding for the Tegra124 DFLL clocksource Tuomas Tynkkynen
2014-07-11 16:28 ` Andrew Bresticker
[not found] ` <CAL1qeaFF0ZpUFovxTuLXrBPRg2Lbf-754Z=ztD5HFZPbfnDsAw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 16:48 ` Tuomas Tynkkynen
2014-07-11 17:08 ` Andrew Bresticker
[not found] ` <CAL1qeaHETQ7kSGNjPiwi_9WNMtr9qZp0KwjZCCxY29+_N4AcuA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 17:21 ` Tuomas Tynkkynen
2014-07-14 8:38 ` Thierry Reding
2014-07-14 9:12 ` Mark Brown
[not found] ` <20140714091233.GC6800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-07-14 9:24 ` Thierry Reding
2014-07-14 10:22 ` Mark Brown
2014-07-15 20:23 ` Tuomas Tynkkynen
[not found] ` <53C58DCB.90502-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-15 22:52 ` Mark Brown
2014-07-16 8:01 ` Thierry Reding
2014-07-16 11:00 ` Mark Brown
2014-07-10 21:42 ` [PATCH 02/13] clk: tegra: Add library for the DFLL clock source (open-loop mode) Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 03/13] clk: tegra: Add closed loop support for the DFLL Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 04/13] clk: tegra: Add functions for parsing CVB tables Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 05/13] clk: tegra: Add DFLL DVCO reset control for Tegra124 Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 06/13] clk: tegra: Add Tegra124 DFLL clocksource platform driver Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 07/13] clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 08/13] clk: tegra: Add the DFLL as a possible parent of the cclk_g clock Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 09/13] ARM: tegra: Add the DFLL to Tegra124 device tree Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 11/13] cpufreq: tegra124: Add device tree bindings Tuomas Tynkkynen
[not found] ` <1405028569-14253-1-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-10 21:42 ` Tuomas Tynkkynen [this message]
2014-07-11 7:14 ` [PATCH 10/13] ARM: tegra: Enable the DFLL on the Jetson TK1 Mikko Perttunen
2014-07-10 21:42 ` [PATCH 12/13] cpufreq: Add cpufreq driver for Tegra124 Tuomas Tynkkynen
[not found] ` <1405028569-14253-13-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 4:35 ` Viresh Kumar
[not found] ` <CAKohpom9ORXFiUU4=V+CxgN0ZOFLMEhEjHiU8HsYUYDybNXgHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 9:12 ` Peter De Schrijver
2014-07-11 9:14 ` Viresh Kumar
[not found] ` <20140711091207.GY23218-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2014-07-11 14:57 ` Thierry Reding
2014-07-11 15:11 ` Tuomas Tynkkynen
2014-07-11 15:15 ` Thierry Reding
2014-07-11 15:29 ` Tuomas Tynkkynen
[not found] ` <53C002BE.90805-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 16:33 ` Andrew Bresticker
2014-07-11 14:14 ` Tuomas Tynkkynen
[not found] ` <53BFF132.3020700-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 14:37 ` Viresh Kumar
2014-07-11 15:32 ` [PATCH 00/13] Tegra124 CL-DVFS / DFLL clocksource, plus cpufreq Mike Turquette
2014-07-10 21:42 ` [PATCH 13/13] ARM: tegra: Add entries for cpufreq on Tegra124 Tuomas Tynkkynen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405028569-14253-11-git-send-email-ttynkkynen@nvidia.com \
--to=ttynkkynen-ddmlm1+adcrqt0dzr+alfa@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-tegra-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=pdeschrijver-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=pgaikwad-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org \
--cc=rjw-LthD3rsA81gm4RdzfppkhA@public.gmane.org \
--cc=swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org \
--cc=thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=viresh.kumar-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).