From: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
To: linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, linux-pm@vger.kernel.org
Cc: Stephen Warren <swarren@wwwdotorg.org>,
Thierry Reding <thierry.reding@gmail.com>,
Peter De Schrijver <pdeschrijver@nvidia.com>,
Prashant Gaikwad <pgaikwad@nvidia.com>,
Mike Turquette <mturquette@linaro.org>,
"Rafael J. Wysocki" <rjw@rjwysocki.net>,
Viresh Kumar <viresh.kumar@linaro.org>,
devicetree@vger.kernel.org,
Tuomas Tynkkynen <ttynkkynen@nvidia.com>
Subject: [PATCH 04/13] clk: tegra: Add functions for parsing CVB tables
Date: Fri, 11 Jul 2014 00:42:40 +0300 [thread overview]
Message-ID: <1405028569-14253-5-git-send-email-ttynkkynen@nvidia.com> (raw)
In-Reply-To: <1405028569-14253-1-git-send-email-ttynkkynen@nvidia.com>
Tegra CVB tables encode the relationship between operating voltage and
optimal frequency as a second-order polynomial of the so-called speedo
value. The speedo value is written to the on-chip fuses at the factory,
which allows the voltage-frequency operating points to be calculated on
an per-chip basis.
Add utility functions to parse the Tegra-specific tables and export the
voltage-frequency pairs to the generic OPP framework for other drivers
to use.
Signed-off-by: Tuomas Tynkkynen <ttynkkynen@nvidia.com>
---
arch/arm/mach-tegra/Kconfig | 1 +
drivers/clk/tegra/cvb.c | 133 ++++++++++++++++++++++++++++++++++++++++++++
drivers/clk/tegra/cvb.h | 67 ++++++++++++++++++++++
3 files changed, 201 insertions(+)
create mode 100644 drivers/clk/tegra/cvb.c
create mode 100644 drivers/clk/tegra/cvb.h
diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index 0953996..0d5832f 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -7,6 +7,7 @@ menuconfig ARCH_TEGRA
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select PINCTRL
+ select PM_OPP
select ARCH_HAS_RESET_CONTROLLER
select RESET_CONTROLLER
select SOC_BUS
diff --git a/drivers/clk/tegra/cvb.c b/drivers/clk/tegra/cvb.c
new file mode 100644
index 0000000..69c74ee
--- /dev/null
+++ b/drivers/clk/tegra/cvb.c
@@ -0,0 +1,133 @@
+/*
+ * Utility functions for parsing Tegra CVB voltage tables
+ *
+ * Copyright (C) 2012-2014 NVIDIA Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/pm_opp.h>
+
+#include "cvb.h"
+
+/* cvb_mv = ((c2 * speedo / s_scale + c1) * speedo / s_scale + c0) */
+static inline int get_cvb_voltage(int speedo, int s_scale,
+ const struct cvb_coefficients *cvb)
+{
+ int mv;
+
+ /* apply only speedo scale: output mv = cvb_mv * v_scale */
+ mv = DIV_ROUND_CLOSEST(cvb->c2 * speedo, s_scale);
+ mv = DIV_ROUND_CLOSEST((mv + cvb->c1) * speedo, s_scale) + cvb->c0;
+ return mv;
+}
+
+static int round_cvb_voltage(int mv, int v_scale,
+ const struct rail_alignment *align)
+{
+ /* combined: apply voltage scale and round to cvb alignment step */
+ int uv;
+ int step = (align->step_uv ? : 1000) * v_scale;
+ int offset = align->offset_uv * v_scale;
+
+ uv = max(mv * 1000, offset) - offset;
+ uv = DIV_ROUND_UP(uv, step) * align->step_uv + align->offset_uv;
+ return uv / 1000;
+}
+
+enum {
+ DOWN,
+ UP
+};
+
+static int round_voltage(int mv, const struct rail_alignment *align, int up)
+{
+ if (align->step_uv) {
+ int uv;
+
+ uv = max(mv * 1000, align->offset_uv) - align->offset_uv;
+ uv = (uv + (up ? align->step_uv - 1 : 0)) / align->step_uv;
+ return (uv * align->step_uv + align->offset_uv) / 1000;
+ }
+ return mv;
+}
+
+static int build_opp_table(const struct cvb_table *d,
+ int speedo_value,
+ unsigned long max_freq,
+ struct device *opp_dev)
+{
+ int i, ret, dfll_mv, min_mv, max_mv;
+ const struct cvb_table_freq_entry *table = NULL;
+ const struct rail_alignment *align = &d->alignment;
+
+ min_mv = round_voltage(d->min_millivolts, align, UP);
+ max_mv = round_voltage(d->max_millivolts, align, DOWN);
+
+ for (i = 0; i < MAX_DVFS_FREQS; i++) {
+ table = &d->cvb_table[i];
+ if (!table->freq || (table->freq > max_freq))
+ break;
+
+ dfll_mv = get_cvb_voltage(
+ speedo_value, d->speedo_scale, &table->coefficients);
+ dfll_mv = round_cvb_voltage(dfll_mv, d->voltage_scale, align);
+ dfll_mv = clamp(dfll_mv, min_mv, max_mv);
+
+ ret = dev_pm_opp_add(opp_dev, table->freq, dfll_mv * 1000);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * tegra_cvb_build_opp_table - build OPP table from Tegra CVB tables
+ * @cvb_tables: array of CVB tables
+ * @sz: size of the previously mentioned array
+ * @process_id: process id of the HW module
+ * @speedo_id: speedo id of the HW module
+ * @speedo_value: speedo value of the HW module
+ * @max_rate: highest safe clock rate
+ * @opp_dev: the struct device * for which the OPP table is built
+ *
+ * On Tegra, a CVB table encodes the relationship between operating voltage
+ * and safe maximal frequency for a given module (e.g. GPU or CPU). This
+ * function calculates the optimal voltage-frequency operating points
+ * for the given arguments and exports them via the OPP library for the
+ * given @opp_dev. Returns a pointer to the struct cvb_table that matched
+ * or an ERR_PTR on failure.
+ */
+const struct cvb_table *tegra_cvb_build_opp_table(
+ const struct cvb_table *cvb_tables,
+ size_t sz, int process_id,
+ int speedo_id, int speedo_value,
+ unsigned long max_rate,
+ struct device *opp_dev)
+{
+ int i, ret;
+
+ for (i = 0; i < sz; i++) {
+ const struct cvb_table *d = &cvb_tables[i];
+
+ if (d->speedo_id != -1 && d->speedo_id != speedo_id)
+ continue;
+ if (d->process_id != -1 && d->process_id != process_id)
+ continue;
+
+ ret = build_opp_table(d, speedo_value, max_rate, opp_dev);
+ return ret ? ERR_PTR(ret) : d;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
diff --git a/drivers/clk/tegra/cvb.h b/drivers/clk/tegra/cvb.h
new file mode 100644
index 0000000..f62cdc4
--- /dev/null
+++ b/drivers/clk/tegra/cvb.h
@@ -0,0 +1,67 @@
+/*
+ * Utility functions for parsing Tegra CVB voltage tables
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __DRIVERS_CLK_TEGRA_CVB_H
+#define __DRIVERS_CLK_TEGRA_CVB_H
+
+#include <linux/types.h>
+
+struct device;
+
+#define MAX_DVFS_FREQS 40
+
+struct rail_alignment {
+ int offset_uv;
+ int step_uv;
+};
+
+struct cvb_coefficients {
+ int c0;
+ int c1;
+ int c2;
+};
+
+struct cvb_table_freq_entry {
+ unsigned long freq;
+ struct cvb_coefficients coefficients;
+};
+
+struct cvb_cpu_dfll_data {
+ u32 tune0_low;
+ u32 tune0_high;
+ u32 tune1;
+};
+
+struct cvb_table {
+ int speedo_id;
+ int process_id;
+
+ int min_millivolts;
+ int max_millivolts;
+ struct rail_alignment alignment;
+
+ int speedo_scale;
+ int voltage_scale;
+ struct cvb_table_freq_entry cvb_table[MAX_DVFS_FREQS];
+ struct cvb_cpu_dfll_data cpu_dfll_data;
+};
+
+const struct cvb_table *tegra_cvb_build_opp_table(
+ const struct cvb_table *cvb_tables,
+ size_t sz, int process_id,
+ int speedo_id, int speedo_value,
+ unsigned long max_rate,
+ struct device *opp_dev);
+
+#endif
--
1.8.1.5
next prev parent reply other threads:[~2014-07-10 21:42 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-10 21:42 [PATCH 00/13] Tegra124 CL-DVFS / DFLL clocksource, plus cpufreq Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 01/13] clk: tegra: Add binding for the Tegra124 DFLL clocksource Tuomas Tynkkynen
2014-07-11 16:28 ` Andrew Bresticker
[not found] ` <CAL1qeaFF0ZpUFovxTuLXrBPRg2Lbf-754Z=ztD5HFZPbfnDsAw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 16:48 ` Tuomas Tynkkynen
2014-07-11 17:08 ` Andrew Bresticker
[not found] ` <CAL1qeaHETQ7kSGNjPiwi_9WNMtr9qZp0KwjZCCxY29+_N4AcuA-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 17:21 ` Tuomas Tynkkynen
2014-07-14 8:38 ` Thierry Reding
2014-07-14 9:12 ` Mark Brown
[not found] ` <20140714091233.GC6800-GFdadSzt00ze9xe1eoZjHA@public.gmane.org>
2014-07-14 9:24 ` Thierry Reding
2014-07-14 10:22 ` Mark Brown
2014-07-15 20:23 ` Tuomas Tynkkynen
[not found] ` <53C58DCB.90502-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-15 22:52 ` Mark Brown
2014-07-16 8:01 ` Thierry Reding
2014-07-16 11:00 ` Mark Brown
2014-07-10 21:42 ` [PATCH 02/13] clk: tegra: Add library for the DFLL clock source (open-loop mode) Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 03/13] clk: tegra: Add closed loop support for the DFLL Tuomas Tynkkynen
2014-07-10 21:42 ` Tuomas Tynkkynen [this message]
2014-07-10 21:42 ` [PATCH 05/13] clk: tegra: Add DFLL DVCO reset control for Tegra124 Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 06/13] clk: tegra: Add Tegra124 DFLL clocksource platform driver Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 07/13] clk: tegra: Save/restore CCLKG_BURST_POLICY on suspend Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 08/13] clk: tegra: Add the DFLL as a possible parent of the cclk_g clock Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 09/13] ARM: tegra: Add the DFLL to Tegra124 device tree Tuomas Tynkkynen
[not found] ` <1405028569-14253-1-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-10 21:42 ` [PATCH 10/13] ARM: tegra: Enable the DFLL on the Jetson TK1 Tuomas Tynkkynen
2014-07-11 7:14 ` Mikko Perttunen
2014-07-10 21:42 ` [PATCH 12/13] cpufreq: Add cpufreq driver for Tegra124 Tuomas Tynkkynen
[not found] ` <1405028569-14253-13-git-send-email-ttynkkynen-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 4:35 ` Viresh Kumar
[not found] ` <CAKohpom9ORXFiUU4=V+CxgN0ZOFLMEhEjHiU8HsYUYDybNXgHQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2014-07-11 9:12 ` Peter De Schrijver
2014-07-11 9:14 ` Viresh Kumar
[not found] ` <20140711091207.GY23218-Rysk9IDjsxmJz7etNGeUX8VPkgjIgRvpAL8bYrjMMd8@public.gmane.org>
2014-07-11 14:57 ` Thierry Reding
2014-07-11 15:11 ` Tuomas Tynkkynen
2014-07-11 15:15 ` Thierry Reding
2014-07-11 15:29 ` Tuomas Tynkkynen
[not found] ` <53C002BE.90805-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 16:33 ` Andrew Bresticker
2014-07-11 14:14 ` Tuomas Tynkkynen
[not found] ` <53BFF132.3020700-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
2014-07-11 14:37 ` Viresh Kumar
2014-07-11 15:32 ` [PATCH 00/13] Tegra124 CL-DVFS / DFLL clocksource, plus cpufreq Mike Turquette
2014-07-10 21:42 ` [PATCH 11/13] cpufreq: tegra124: Add device tree bindings Tuomas Tynkkynen
2014-07-10 21:42 ` [PATCH 13/13] ARM: tegra: Add entries for cpufreq on Tegra124 Tuomas Tynkkynen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405028569-14253-5-git-send-email-ttynkkynen@nvidia.com \
--to=ttynkkynen@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=pdeschrijver@nvidia.com \
--cc=pgaikwad@nvidia.com \
--cc=rjw@rjwysocki.net \
--cc=swarren@wwwdotorg.org \
--cc=thierry.reding@gmail.com \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).