From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: kishon-l0cyMroinI0@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>,
Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
Jason Gunthorpe
<jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>,
Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>,
Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Subject: [RESEND PATCH 8/8] ARM: dts: dra7: Add dt data for PCIe controller
Date: Mon, 14 Jul 2014 16:12:23 +0530 [thread overview]
Message-ID: <1405334543-25509-9-git-send-email-kishon@ti.com> (raw)
In-Reply-To: <1405334543-25509-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
Added dt data for PCIe controller. This node contains dt data for
both the DRA7 part of designware controller and for the designware core.
The documention for this node can be found @ ../bindings/pci/ti-pci.txt.
Cc: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
Cc: Bjorn Helgaas <bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org>
Cc: Jingoo Han <jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>
Cc: Jason Gunthorpe <jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org>
Cc: Marek Vasut <marex-ynQEQJNshbs@public.gmane.org>
Cc: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
arch/arm/boot/dts/dra7.dtsi | 69 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 69 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index cbaf47d..b6060d3 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -99,6 +99,75 @@
};
};
+ axi@0 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51000000 0x51000000 0x3000
+ 0x0 0x20000000 0x10000000>;
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 232 0x4>, <0 233 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie1";
+ phys = <&pcie1_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 1>,
+ <0 0 0 2 &pcie1_intc 2>,
+ <0 0 0 3 &pcie1_intc 3>,
+ <0 0 0 4 &pcie1_intc 4>;
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
+ axi@1 {
+ compatible = "simple-bus";
+ #size-cells = <1>;
+ #address-cells = <1>;
+ ranges = <0x51800000 0x51800000 0x3000
+ 0x0 0x30000000 0x10000000>;
+ status = "disabled";
+ pcie@51000000 {
+ compatible = "ti,dra7-pcie";
+ reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
+ reg-names = "rc_dbics", "ti_conf", "config";
+ interrupts = <0 355 0x4>, <0 356 0x4>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ ranges = <0x81000000 0 0 0x03000 0 0x00010000
+ 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
+ #interrupt-cells = <1>;
+ num-lanes = <1>;
+ ti,hwmods = "pcie2";
+ phys = <&pcie2_phy>;
+ phy-names = "pcie-phy0";
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 1>,
+ <0 0 0 2 &pcie2_intc 2>,
+ <0 0 0 3 &pcie2_intc 3>,
+ <0 0 0 4 &pcie2_intc 4>;
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+ };
+ };
+
cm_core_aon: cm_core_aon@4a005000 {
compatible = "ti,dra7-cm-core-aon";
reg = <0x4a005000 0x2000>;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2014-07-14 10:42 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-14 10:42 [RESEND PATCH 0/8] arm: dts: dra7: Add PCIe data and PCIe PHY data Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 1/8] ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 2/8] ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 3/8] ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 4/8] ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 5/8] ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe " Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 6/8] ARM: dts: dra7: Add dt data for PCIe PHY control module Kishon Vijay Abraham I
2014-07-14 10:42 ` [RESEND PATCH 7/8] ARM: dts: dra7: Add dt data for PCIe PHY Kishon Vijay Abraham I
[not found] ` <1405334543-25509-1-git-send-email-kishon-l0cyMroinI0@public.gmane.org>
2014-07-14 10:42 ` Kishon Vijay Abraham I [this message]
2014-07-15 7:18 ` [RESEND PATCH 0/8] arm: dts: dra7: Add PCIe data and PCIe PHY data Tony Lindgren
2014-07-16 4:46 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405334543-25509-9-git-send-email-kishon@ti.com \
--to=kishon-l0cymroini0@public.gmane.org \
--cc=arnd-r2nGTMty4D4@public.gmane.org \
--cc=bhelgaas-hpIqsD4AKlfQT0dZR+AlfA@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=jg1.han-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=jgunthorpe-ePGOBjL8dl3ta4EC/59zMFaTQe2KTcn/@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=marex-ynQEQJNshbs@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).