From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: [PATCH v2 03/11] ARM: stih416: Add DT nodes for PWM Date: Mon, 14 Jul 2014 15:33:24 +0100 Message-ID: <1405348412-7352-4-git-send-email-lee.jones@linaro.org> References: <1405348412-7352-1-git-send-email-lee.jones@linaro.org> Return-path: In-Reply-To: <1405348412-7352-1-git-send-email-lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org Cc: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org, kernel-F5mvAk5X5gdBDgjK7y7TUQ@public.gmane.org, thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org, linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, ajitpal.singh-qxv4g6HH51o@public.gmane.org List-Id: devicetree@vger.kernel.org Supply top level nodes for the STiH416 based development boards. The Pinctrl configuration has already been applied, so the only missing piece of the DT puzzle is for a board's DTB to enable the nodes. Signed-off-by: Ajit Pal Singh Signed-off-by: Lee Jones --- arch/arm/boot/dts/stih416.dtsi | 44 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 43 insertions(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 84758d7..c28ef85 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -102,7 +102,7 @@ interrupts = <0 210 0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; - clocks = <&clk_sysin>; + clocks = <&clk_sysin>; }; i2c@fed40000 { @@ -236,5 +236,47 @@ resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>, <&softreset STIH416_KEYSCAN_SOFTRESET>; }; + + /* SAS PWM Module */ + pwm0: pwm@fed10000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfed10000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_chan0_default + &pinctrl_pwm0_chan1_default + &pinctrl_pwm0_chan2_default + &pinctrl_pwm0_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <4>; + }; + + /* SBC PWM Module */ + pwm1: pwm@fe510000 { + compatible = "st,sti-pwm"; + status = "disabled"; + #pwm-cells = <2>; + reg = <0xfe510000 0x68>; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + /* + * Shared with SBC_OBS_NOTRST. Don't + * enable unless you really know what + * you're doing. + * + * &pinctrl_pwm1_chan1_default + */ + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + + clock-names = "pwm"; + clocks = <&clk_sysin>; + st,pwm-num-chan = <3>; + }; }; }; -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html