From: Zhou Wang <wangzhou.bry@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Kumar Gala <galak@codeaurora.org>,
Russell King <linux@arm.linux.org.uk>,
David Woodhouse <dwmw2@infradead.org>,
Brian Norris <computersforpeace@gmail.com>,
Grant Likely <grant.likely@linaro.org>,
Ezequiel Garcia <ezequiel.garcia@free-electrons.com>,
Pekon Gupta <pekon@ti.com>,
Artem Bityutskiy <artem.bityutskiy@linux.intel.com>,
Alexander Shiyan <shc_work@mail.ru>,
Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>,
Jussi Kivilinna <jussi.kivilinna@iki.fi>,
Joern Engel <joern@logfs.org>,
Randy Dunlap <rdunlap@infradead.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-mtd@lists.infradead.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: wangzhou1@hisilicon.com, caizhiyong@huawei.com,
Zhou Wang <wangzhou.bry@gmail.com>
Subject: [PATCH v1 0/3] mtd: hisilicon: add a new driver for NAND controller of hisilicon hip04 Soc
Date: Tue, 15 Jul 2014 18:58:23 +0800 [thread overview]
Message-ID: <1405421906-660-1-git-send-email-wangzhou.bry@gmail.com> (raw)
This series patches add the support for NAND controller of hisilicon
hip04 Soc. These patches are base on branch integration-hilt-working-v3.14
in linaro landing-team git repository[1].
The NAND controller IP was developed by hisilicon and need a new driver
to support. The driver is usable and I tested it on hisilicon hip04-d01
board.
Changes in v1:
- Remove callback functions out of struct hinfc_host, and call them directly
in relative functions.
- Change hinfc_read and hinfc_write from macros to inline functions.
- Instead of putting pointers, embed struct nand_chip and struct mtd_info in
struct hinfc_host directly.
- rewrite some unclear lines in device tree binding document, correct some
code style error.
[1] ssh://git@git.linaro.org/landing-teams/working/hisilicon/kernel.git
Zhou Wang (3):
mtd: hisilicon: add device tree node for nand controller
mtd: hisilicon: add a new nand controller driver for hisilicon hip04 Soc
mtd: hisilicon: add device tree binding documentation
.../devicetree/bindings/mtd/hisi-nand.txt | 40 +
arch/arm/boot/dts/hip04.dtsi | 31 +
drivers/mtd/nand/Kconfig | 5 +
drivers/mtd/nand/Makefile | 1 +
drivers/mtd/nand/hisi_nand.c | 836 ++++++++++++++++++++
5 files changed, 913 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mtd/hisi-nand.txt
create mode 100644 drivers/mtd/nand/hisi_nand.c
--
1.7.9.5
next reply other threads:[~2014-07-15 10:58 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-15 10:58 Zhou Wang [this message]
2014-07-15 10:58 ` [PATCH v1 1/3] mtd: hisilicon: add device tree node for nand controller Zhou Wang
2014-07-15 10:58 ` [PATCH v1 2/3] mtd: hisilicon: add a new nand controller driver for hisilicon hip04 Soc Zhou Wang
2014-07-23 6:54 ` Zhou Wang
2014-07-15 10:58 ` [PATCH v1 3/3] mtd: hisilicon: add device tree binding documentation Zhou Wang
2014-07-23 7:03 ` Zhou Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1405421906-660-1-git-send-email-wangzhou.bry@gmail.com \
--to=wangzhou.bry@gmail.com \
--cc=artem.bityutskiy@linux.intel.com \
--cc=caizhiyong@huawei.com \
--cc=computersforpeace@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=ezequiel.garcia@free-electrons.com \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=ivan.khoronzhuk@ti.com \
--cc=joern@logfs.org \
--cc=jussi.kivilinna@iki.fi \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mtd@lists.infradead.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=pekon@ti.com \
--cc=rdunlap@infradead.org \
--cc=robh+dt@kernel.org \
--cc=shc_work@mail.ru \
--cc=wangzhou1@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).