devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: arnd-r2nGTMty4D4@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	b.galvani-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
	max.schwarz-BGeptl67XyCzQB+pC5nmwQ@public.gmane.org
Cc: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Subject: [PATCH v2 10/15] ARM: dts: rockchip: add tps65910 regulator for bqcurie2
Date: Sun, 27 Jul 2014 01:18:26 +0200	[thread overview]
Message-ID: <1406416711-28006-11-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1406416711-28006-1-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>

The Curie2 uses a tps659102 as its main pmic, so add the i2c1 and tps65910
node as well as define the used voltages and regulator-names according to
the schematics.

Also fix the supply of the sd0 regulator, as it is supplied by the vio reg.

Signed-off-by: Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
---
 arch/arm/boot/dts/rk3066a-bqcurie2.dts | 87 ++++++++++++++++++++++++++++++++++
 1 file changed, 87 insertions(+)

diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
index 38910f6..8b479f7 100644
--- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts
+++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts
@@ -31,6 +31,7 @@
 		regulator-max-microvolt = <3000000>;
 		gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
 		startup-delay-us = <100000>;
+		vin-supply = <&vcc_io>;
 	};
 
 	gpio-keys {
@@ -59,6 +60,92 @@
 	};
 };
 
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps: tps@2d {
+		reg = <0x2d>;
+
+		interrupt-parent = <&gpio6>;
+		interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+
+		vcc5-supply = <&vcc_io>;
+		vcc6-supply = <&vcc_io>;
+
+		regulators {
+			vcc_rtc: regulator@0 {
+				regulator-name = "vcc_rtc";
+				regulator-always-on;
+			};
+
+			vcc_io: regulator@1 {
+				regulator-name = "vcc_io";
+				regulator-always-on;
+			};
+
+			vdd_arm: regulator@2 {
+				regulator-name = "vdd_arm";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc_ddr: regulator@3 {
+				regulator-name = "vcc_ddr";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vcc18_cif: regulator@5 {
+				regulator-name = "vcc18_cif";
+				regulator-always-on;
+			};
+
+			vdd_11: regulator@6 {
+				regulator-name = "vdd_11";
+				regulator-always-on;
+			};
+
+			vcc_25: regulator@7 {
+				regulator-name = "vcc_25";
+				regulator-always-on;
+			};
+
+			vcc_18: regulator@8 {
+				regulator-name = "vcc_18";
+				regulator-always-on;
+			};
+
+			vcc25_hdmi: regulator@9 {
+				regulator-name = "vcc25_hdmi";
+				regulator-always-on;
+			};
+
+			vcca_33: regulator@10 {
+				regulator-name = "vcca_33";
+				regulator-always-on;
+			};
+
+			vcc_tp: regulator@11 {
+				regulator-name = "vcc_tp";
+				regulator-always-on;
+			};
+
+			vcc28_cif: regulator@12 {
+				regulator-name = "vcc28_cif";
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
 &mmc0 { /* sdmmc */
 	num-slots = <1>;
 	status = "okay";
-- 
2.0.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-07-26 23:18 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-26 23:18 [PATCH v2 00/15] ARM: dts: rockchip: collected changes for existing boards Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 01/15] ARM: dts: rockchip: add cru nodes and update device clocks to use it Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 02/15] ARM: dts: rockchip: move oscillator input clock into main dtsi Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 03/15] arm: dts: rockchip: remove obsolete clock gate definitions Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 04/15] ARM: dts: rockchip: remove soc subnodes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 05/15] ARM: dts: rockchip: add handles for shared nodes that don't have one yet Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 06/15] ARM: dts: uses handles to reference nodes for changes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 07/15] ARM: dts: rockchip: remove address from pinctrl nodes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 08/15] ARM: dts: rockchip: order nodes by register address Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 09/15] ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings Heiko Stuebner
     [not found] ` <1406416711-28006-1-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-07-26 23:18   ` Heiko Stuebner [this message]
2014-07-26 23:18   ` [PATCH v2 11/15] ARM: dts: add i2c and regulator nodes to rk3188-radxarock Heiko Stuebner
2014-07-26 23:18   ` [PATCH v2 12/15] ARM: dts: rk3188-radxarock: enable sd-card slot Heiko Stuebner
2014-07-26 23:18   ` [PATCH v2 13/15] ARM: dts: rockchip: add both clocks to uart nodes Heiko Stuebner
2014-07-26 23:18   ` [PATCH v2 14/15] ARM: dts: rockchip: add pwm nodes Heiko Stuebner
2014-07-26 23:18   ` [PATCH v2 15/15] ARM: dts: rk3188-radxarock: add GPIO IR receiver node Heiko Stuebner

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406416711-28006-11-git-send-email-heiko@sntech.de \
    --to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
    --cc=arnd-r2nGTMty4D4@public.gmane.org \
    --cc=b.galvani-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=max.schwarz-BGeptl67XyCzQB+pC5nmwQ@public.gmane.org \
    --cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).