From: Heiko Stuebner <heiko@sntech.de>
To: arnd@arndb.de, linux-arm-kernel@lists.infradead.org,
olof@lixom.net, devicetree@vger.kernel.org, b.galvani@gmail.com,
max.schwarz@online.de
Cc: Heiko Stuebner <heiko@sntech.de>
Subject: [PATCH v2 05/15] ARM: dts: rockchip: add handles for shared nodes that don't have one yet
Date: Sun, 27 Jul 2014 01:18:21 +0200 [thread overview]
Message-ID: <1406416711-28006-6-git-send-email-heiko@sntech.de> (raw)
In-Reply-To: <1406416711-28006-1-git-send-email-heiko@sntech.de>
Some nodes that are changed in the dtsi hierarchy do not have handles yet.
As it was suggested in the rk3288 submission to do subsequent nodes changes
through such handle-references, add the missing ones.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
arch/arm/boot/dts/rk3066a.dtsi | 2 +-
arch/arm/boot/dts/rk3188.dtsi | 2 +-
arch/arm/boot/dts/rk3xxx.dtsi | 8 ++++----
3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi
index 4ad8f59..ecf722e 100644
--- a/arch/arm/boot/dts/rk3066a.dtsi
+++ b/arch/arm/boot/dts/rk3066a.dtsi
@@ -86,7 +86,7 @@
#reset-cells = <1>;
};
- pinctrl@20008000 {
+ pinctrl: pinctrl@20008000 {
compatible = "rockchip,rk3066a-pinctrl";
rockchip,grf = <&grf>;
#address-cells = <1>;
diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi
index 038d9d4..7b631ec 100644
--- a/arch/arm/boot/dts/rk3188.dtsi
+++ b/arch/arm/boot/dts/rk3188.dtsi
@@ -82,7 +82,7 @@
#reset-cells = <1>;
};
- pinctrl@20008000 {
+ pinctrl: pinctrl@20008000 {
compatible = "rockchip,rk3188-pinctrl";
rockchip,grf = <&grf>;
rockchip,pmu = <&pmu>;
diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi
index f70addd..10e7586 100644
--- a/arch/arm/boot/dts/rk3xxx.dtsi
+++ b/arch/arm/boot/dts/rk3xxx.dtsi
@@ -57,14 +57,14 @@
cache-level = <2>;
};
- global-timer@1013c200 {
+ global_timer: global-timer@1013c200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1013c200 0x20>;
interrupts = <GIC_PPI 11 0x304>;
clocks = <&cru CORE_PERI>;
};
- local-timer@1013c600 {
+ local_timer: local-timer@1013c600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1013c600 0x20>;
interrupts = <GIC_PPI 13 0x304>;
@@ -111,7 +111,7 @@
status = "disabled";
};
- dwmmc@10214000 {
+ mmc0: dwmmc@10214000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -124,7 +124,7 @@
status = "disabled";
};
- dwmmc@10218000 {
+ mmc1: dwmmc@10218000 {
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
--
2.0.1
next prev parent reply other threads:[~2014-07-26 23:18 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-26 23:18 [PATCH v2 00/15] ARM: dts: rockchip: collected changes for existing boards Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 01/15] ARM: dts: rockchip: add cru nodes and update device clocks to use it Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 02/15] ARM: dts: rockchip: move oscillator input clock into main dtsi Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 03/15] arm: dts: rockchip: remove obsolete clock gate definitions Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 04/15] ARM: dts: rockchip: remove soc subnodes Heiko Stuebner
2014-07-26 23:18 ` Heiko Stuebner [this message]
2014-07-26 23:18 ` [PATCH v2 06/15] ARM: dts: uses handles to reference nodes for changes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 07/15] ARM: dts: rockchip: remove address from pinctrl nodes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 08/15] ARM: dts: rockchip: order nodes by register address Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 09/15] ARM: dts: add rk3066 and rk3188 i2c device nodes and pinctrl settings Heiko Stuebner
[not found] ` <1406416711-28006-1-git-send-email-heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2014-07-26 23:18 ` [PATCH v2 10/15] ARM: dts: rockchip: add tps65910 regulator for bqcurie2 Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 11/15] ARM: dts: add i2c and regulator nodes to rk3188-radxarock Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 12/15] ARM: dts: rk3188-radxarock: enable sd-card slot Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 13/15] ARM: dts: rockchip: add both clocks to uart nodes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 14/15] ARM: dts: rockchip: add pwm nodes Heiko Stuebner
2014-07-26 23:18 ` [PATCH v2 15/15] ARM: dts: rk3188-radxarock: add GPIO IR receiver node Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1406416711-28006-6-git-send-email-heiko@sntech.de \
--to=heiko@sntech.de \
--cc=arnd@arndb.de \
--cc=b.galvani@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=max.schwarz@online.de \
--cc=olof@lixom.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).