devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Ajay Kumar <ajaykumar.rs@samsung.com>
To: linux-arm-kernel@lists.infradead.org,
	linux-samsung-soc@vger.kernel.org, devicetree@vger.kernel.org
Cc: kgene.kim@samsung.com, inki.dae@samsung.com,
	thierry.reding@gmail.com, seanpaul@google.com,
	ajaynumb@gmail.com, jg1.han@samsung.com, joshi@samsung.com,
	prashanth.g@samsung.com, Ajay Kumar <ajaykumar.rs@samsung.com>
Subject: [PATCH V3] ARM: dts: Add DT changes for display on peach_pi
Date: Mon, 04 Aug 2014 15:17:18 +0530	[thread overview]
Message-ID: <1407145638-3803-1-git-send-email-ajaykumar.rs@samsung.com> (raw)

Add DT nodes for panel-simple "auo,b133htn01" panel.
Add backlight enable pin and backlight power supply for pwm-backlight.
Also, add panel phandle needed by dp to enable display on peach_pi.

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
---
Changes since V1:
Remove "simple-panel" compatible string and use only ""auo,b133htn01".

Changes since V2:
As suggested by Andreas,
Use GPIO_ACTIVE_HIGH for backlight enable-gpios instead of using 0.
Change panel node naming from "panel-simple" to "panel".

 arch/arm/boot/dts/exynos5800-peach-pi.dts |   27 ++++++++++-----------------
 1 file changed, 10 insertions(+), 17 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index f3ee48b..f8c2e61 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -28,11 +28,13 @@
 		i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel";
 	};
 
-	backlight {
+	backlight: backlight {
 		compatible = "pwm-backlight";
 		pwms = <&pwm 0 1000000 0>;
 		brightness-levels = <0 100 500 1000 1500 2000 2500 2800>;
 		default-brightness-level = <7>;
+		enable-gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+		power-supply = <&tps65090_fet1>;
 		pinctrl-0 = <&pwm0_out>;
 		pinctrl-names = "default";
 	};
@@ -98,6 +100,12 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	panel: panel {
+		compatible = "auo,b133htn01";
+		power-supply = <&tps65090_fet6>;
+		backlight = <&backlight>;
+	};
 };
 
 &dp {
@@ -111,22 +119,7 @@
 	samsung,link-rate = <0x0a>;
 	samsung,lane-count = <2>;
 	samsung,hpd-gpio = <&gpx2 6 0>;
-
-	display-timings {
-		native-mode = <&timing1>;
-
-		timing1: timing@1 {
-			clock-frequency = <150660000>;
-			hactive = <1920>;
-			vactive = <1080>;
-			hfront-porch = <60>;
-			hback-porch = <172>;
-			hsync-len = <80>;
-			vback-porch = <25>;
-			vfront-porch = <10>;
-			vsync-len = <10>;
-		};
-	};
+	panel = <&panel>;
 };
 
 &fimd {
-- 
1.7.9.5

             reply	other threads:[~2014-08-04  9:47 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-08-04  9:47 Ajay Kumar [this message]
2014-08-25  6:13 ` [PATCH V3] ARM: dts: Add DT changes for display on peach_pi Ajay kumar
2014-09-14  0:23   ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1407145638-3803-1-git-send-email-ajaykumar.rs@samsung.com \
    --to=ajaykumar.rs@samsung.com \
    --cc=ajaynumb@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=inki.dae@samsung.com \
    --cc=jg1.han@samsung.com \
    --cc=joshi@samsung.com \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=prashanth.g@samsung.com \
    --cc=seanpaul@google.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).