From mboxrd@z Thu Jan 1 00:00:00 1970 From: Doug Anderson Subject: [PATCH v4 0/2] Add eMMC and SD card support for rk3288-evb Date: Tue, 12 Aug 2014 16:21:12 -0700 Message-ID: <1407885674-16469-1-git-send-email-dianders@chromium.org> Return-path: Sender: linux-mmc-owner@vger.kernel.org To: Heiko Stuebner , Seungwon Jeon , Jaehoon Chung , Chris Ball , Ulf Hansson Cc: Addy Ke , Kever Yang , Sonny Rao , linux-arm-kernel@lists.infradead.org, linux-mmc@vger.kernel.org, Arnd Bergmann , Doug Anderson , mark.rutland@arm.com, devicetree@vger.kernel.org, linux@arm.linux.org.uk, pawel.moll@arm.com, ijc+devicetree@hellion.org.uk, linux-kernel@vger.kernel.org, robh+dt@kernel.org, galak@codeaurora.org List-Id: devicetree@vger.kernel.org This series adds basic eMMC and SD card support for the rk3288-evb board based on Addy's dw_mmc patch. Note that we don't have regulators specified yet (no regulator driver for rk808-based board). We also don't yet support UHS modes or MMC DDR50 (which require regulator support plus dw_mmc driver support for tuning). Those features can come later. Changes in v4: - Add status="disabled". - Squash patch #1 and #4 since Jaehoon's patch landed. - Squashed patches #2 and #3 since Jaehoon's patch landed. Changes in v3: - Removed DDR50 mode since it needs tuning, which isn't there yet. Changes in v2: - Refer to the new title of Jaehoon's patch - New patchwork link for Addy's patch - Squashed in the DDR50 mode since Addy spun his patch. Doug Anderson (2): ARM: dts: Add emmc and sdmmc to the rk3288 device tree ARM: dts: Enable emmc and sdmmc on the rk3288-evb boards arch/arm/boot/dts/rk3288-evb.dtsi | 24 ++++++++++++++++++++++++ arch/arm/boot/dts/rk3288.dtsi | 20 ++++++++++++++++++++ 2 files changed, 44 insertions(+) -- 2.1.0.rc2.206.gedb03e5