From: Guodong Xu <guodong.xu@linaro.org>
To: robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com,
ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
linux@arm.linux.org.uk, sameo@linux.intel.com,
lee.jones@linaro.org, lgirdwood@gmail.com, broonie@kernel.org,
grant.likely@linaro.org, khilman@linaro.org,
haojian.zhuang@linaro.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, axel.lin@ingics.com,
zhangnian@huawei.com
Cc: Guodong Xu <guodong.xu@linaro.org>
Subject: [PATCH v6 6/6] ARM: dts: hi3620-hi4511: Add HI6421 MFD and regulator nodes
Date: Mon, 18 Aug 2014 21:09:16 +0800 [thread overview]
Message-ID: <1408367356-2628-7-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1408367356-2628-1-git-send-email-guodong.xu@linaro.org>
Add Hi6421 MFD dts node and regulator nodes into hi3620-hi4511
board config dts file.
Signed-off-by: Guodong Xu <guodong.xu@linaro.org>
---
arch/arm/boot/dts/hi3620-hi4511.dts | 233 ++++++++++++++++++++++++++++++++++++
1 file changed, 233 insertions(+)
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index fe62392..312c3f9 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -635,6 +635,239 @@
pinctrl-single,bias-pullup = <0 1 0 1>;
};
};
+
+ pmic: pmic@c00000 {
+ compatible = "hisilicon,hi6421-pmic";
+ reg = <0xc00000 0x0180>; /* 0x60 << 2 */
+
+ regulators {
+ // supply for MLC NAND/ eMMC
+ hi6421_vout0_reg: hi6421_vout0 {
+ regulator-name = "VOUT0";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for 26M Oscillator
+ hi6421_vout1_reg: hi6421_vout1 {
+ regulator-name = "VOUT1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for AP system
+ hi6421_vout2_reg: hi6421_vout2 {
+ regulator-name = "VOUT2";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for DDR PHY I/O
+ hi6421_vout3_reg: hi6421_vout3 {
+ regulator-name = "VOUT3";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for MIPI, USB2.0, PCIe, PLL Analog
+ hi6421_vout4_reg: hi6421_vout4 {
+ regulator-name = "VOUT4";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for I/O 1.8V
+ hi6421_vout5_reg: hi6421_vout5 {
+ regulator-name = "VOUT5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for I/O 2.6V
+ hi6421_vout6_reg: hi6421_vout6 {
+ regulator-name = "VOUT6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for SD I/O
+ hi6421_vout7_reg: hi6421_vout7 {
+ regulator-name = "VOUT7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for USB PHY
+ hi6421_vout8_reg: hi6421_vout8 {
+ regulator-name = "VOUT8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Efuse power
+ hi6421_vout9_reg: hi6421_vout9 {
+ regulator-name = "VOUT9";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for BT RF&PA
+ hi6421_vout10_reg: hi6421_vout10 {
+ regulator-name = "VOUT10";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for GPS RF&PA
+ hi6421_vout11_reg: hi6421_vout11 {
+ regulator-name = "VOUT11";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for SD card
+ hi6421_vout12_reg: hi6421_vout12 {
+ regulator-name = "VOUT12";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for CMMB
+ hi6421_vout13_reg: hi6421_vout13 {
+ regulator-name = "VOUT13";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for WIFI I/O
+ hi6421_vout14_reg: hi6421_vout14 {
+ regulator-name = "VOUT14";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for WIFI core & PA
+ hi6421_vout15_reg: hi6421_vout15 {
+ regulator-name = "VOUT15";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for LCD I/O
+ hi6421_vout16_reg: hi6421_vout16 {
+ regulator-name = "VOUT16";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ // supply for LCD Ananlog
+ hi6421_vout17_reg: hi6421_vout17 {
+ regulator-name = "VOUT17";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ // supply for Camera I/O
+ hi6421_vout18_reg: hi6421_vout18 {
+ regulator-name = "VOUT18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Camera Analog
+ hi6421_vout19_reg: hi6421_vout19 {
+ regulator-name = "VOUT19";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Camera VCM
+ hi6421_vout20_reg: hi6421_vout20 {
+ regulator-name = "VOUT20";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Audio, incl. HKADC
+ hi6421_vout_audio_reg: hi6421_vout_audio {
+ regulator-name = "AVDD2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for Cortex-A9 CPU core
+ hi6421_buck0_reg: hi6421_buck0 {
+ regulator-name = "VBUCK0";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Cortex-A9 CPU core
+ hi6421_buck1_reg: hi6421_buck1 {
+ regulator-name = "VBUCK1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for GPU
+ hi6421_buck2_reg: hi6421_buck2 {
+ regulator-name = "VBUCK2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ };
+
+ // supply for Peripheral
+ hi6421_buck3_reg: hi6421_buck3 {
+ regulator-name = "VBUCK3";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for LPDDR2 and AP I/O
+ hi6421_buck4_reg: hi6421_buck4 {
+ regulator-name = "VBUCK4";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Low voltage
+ hi6421_buck5_reg: hi6421_buck5 {
+ regulator-name = "VBUCK5";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
};
gpio-keys {
--
1.9.1
prev parent reply other threads:[~2014-08-18 13:09 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-18 13:09 [PATCH v6 0/6] Add MFD and regulator drivers for Hi6421 PMIC SoC Guodong Xu
2014-08-18 13:09 ` [PATCH v6 1/6] regulator: core: add const qualifier to ops in struct regulator_desc Guodong Xu
2014-08-18 13:09 ` [PATCH v6 2/6] regulator: core: factor out delay function from _regulator_do_enable Guodong Xu
2014-08-18 13:09 ` [PATCH v6 3/6] regulator: core: add guard delay between calling regulator_disable and _enable Guodong Xu
2014-08-18 13:09 ` [PATCH v6 4/6] mfd: Add hi6421 PMIC core driver Guodong Xu
[not found] ` <1408367356-2628-5-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-08-18 13:57 ` Mark Brown
2014-08-20 8:09 ` Lee Jones
2014-08-25 9:16 ` Guodong Xu
[not found] ` <53FAFF03.1000301-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-08-26 9:07 ` Lee Jones
2014-08-18 13:09 ` [PATCH v6 5/6] regulator: add driver for hi6421 voltage regulator Guodong Xu
2014-08-18 13:09 ` Guodong Xu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408367356-2628-7-git-send-email-guodong.xu@linaro.org \
--to=guodong.xu@linaro.org \
--cc=axel.lin@ingics.com \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=grant.likely@linaro.org \
--cc=haojian.zhuang@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
--cc=sameo@linux.intel.com \
--cc=zhangnian@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).