From: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
To: robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org,
mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org,
olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org,
sonnyrao-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
dtor-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org,
javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org,
kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org,
Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
Subject: [PATCH v3 5/5] Clk: RK808: Add clkout driver for RK808
Date: Sat, 23 Aug 2014 19:07:04 +0800 [thread overview]
Message-ID: <1408792024-17367-1-git-send-email-zyw@rock-chips.com> (raw)
Signed-off-by: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
---
Changes in v4:
Advices by Doug
- add a "#clock-cells" propertiy
- update the example
Changes in v3: None
Changes in v2: None
drivers/clk/Kconfig | 9 ++
drivers/clk/Makefile | 1 +
drivers/clk/clk-rk808.c | 162 ++++++++++++++++++++++++++++
include/dt-bindings/clock/rockchip,rk808.h | 11 ++
4 files changed, 183 insertions(+)
create mode 100644 drivers/clk/clk-rk808.c
create mode 100644 include/dt-bindings/clock/rockchip,rk808.h
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index cfd3af7..84e0590 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -38,6 +38,15 @@ config COMMON_CLK_MAX77686
---help---
This driver supports Maxim 77686 crystal oscillator clock.
+config COMMON_CLK_RK808
+ tristate "Clock driver for RK808"
+ depends on MFD_RK808
+ ---help---
+ This driver supports RK808 crystal oscillator clock. These
+ multi-function devices have two fixed-rate oscillators,
+ clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
+ by control register.
+
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index f537a0b..99f53d5 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
obj-$(CONFIG_CLK_PPC_CORENET) += clk-ppc-corenet.o
+obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
diff --git a/drivers/clk/clk-rk808.c b/drivers/clk/clk-rk808.c
new file mode 100644
index 0000000..50a25fc
--- /dev/null
+++ b/drivers/clk/clk-rk808.c
@@ -0,0 +1,162 @@
+/*
+ * Clkout driver for Rockchip RK808
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * Author: Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+ * Author: Zhang Qing <zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/rk808.h>
+#include <linux/i2c.h>
+
+struct rk808_clkout {
+ struct rk808 *rk808;
+ struct clk_onecell_data clk_data;
+ struct clk_hw clkout1_hw;
+ struct clk_hw clkout2_hw;
+};
+
+static unsigned long rk808_clkout_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ return 32768;
+}
+
+static int rk808_clkout1_is_prepared(struct clk_hw *hw)
+{
+ return 1;
+}
+
+static int rk808_clkout2_control(struct clk_hw *hw, bool enable)
+{
+ struct rk808_clkout *rk808_clkout = container_of(hw,
+ struct rk808_clkout,
+ clkout2_hw);
+ struct rk808 *rk808 = rk808_clkout->rk808;
+
+ return regmap_update_bits(rk808->regmap, RK808_CLK32OUT_REG,
+ CLK32KOUT2_EN, enable ? CLK32KOUT2_EN : 0);
+}
+
+static int rk808_clkout2_prepare(struct clk_hw *hw)
+{
+ return rk808_clkout2_control(hw, 1);
+}
+
+static void rk808_clkout2_unprepare(struct clk_hw *hw)
+{
+ rk808_clkout2_control(hw, 0);
+}
+
+static int rk808_clkout2_is_prepared(struct clk_hw *hw)
+{
+ struct rk808_clkout *rk808_clkout = container_of(hw,
+ struct rk808_clkout,
+ clkout2_hw);
+ struct rk808 *rk808 = rk808_clkout->rk808;
+ uint32_t val;
+
+ int ret = regmap_read(rk808->regmap, RK808_CLK32OUT_REG, &val);
+
+ if (ret < 0)
+ return ret;
+
+ return (val & CLK32KOUT2_EN) ? 1 : 0;
+}
+
+static const struct clk_ops rk808_clkout1_ops = {
+ .is_prepared = rk808_clkout1_is_prepared,
+ .recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static const struct clk_ops rk808_clkout2_ops = {
+ .prepare = rk808_clkout2_prepare,
+ .unprepare = rk808_clkout2_unprepare,
+ .is_prepared = rk808_clkout2_is_prepared,
+ .recalc_rate = rk808_clkout_recalc_rate,
+};
+
+static int rk808_clkout_probe(struct platform_device *pdev)
+{
+ struct rk808 *rk808 = dev_get_drvdata(pdev->dev.parent);
+ struct i2c_client *client = rk808->i2c;
+ struct device_node *node = client->dev.of_node;
+ struct clk_init_data init;
+ struct clk **clk_table;
+ struct rk808_clkout *rk808_clkout;
+
+ rk808_clkout = devm_kzalloc(&client->dev,
+ sizeof(*rk808_clkout), GFP_KERNEL);
+ if (!rk808_clkout)
+ return -ENOMEM;
+
+ rk808_clkout->rk808 = rk808;
+
+ clk_table = devm_kzalloc(&client->dev,
+ 2*sizeof(struct clk *), GFP_KERNEL);
+ if (!clk_table)
+ return -ENOMEM;
+
+ init.flags = CLK_IS_ROOT;
+ init.parent_names = NULL;
+ init.num_parents = 0;
+ init.name = "rk808-clkout1";
+ init.ops = &rk808_clkout1_ops;
+ rk808_clkout->clkout1_hw.init = &init;
+
+ /* optional override of the clockname */
+ of_property_read_string_index(node, "clock-output-names",
+ 0, &init.name);
+
+ clk_table[0] = devm_clk_register(&client->dev,
+ &rk808_clkout->clkout1_hw);
+
+ init.name = "rk808-clkout2";
+ init.ops = &rk808_clkout2_ops;
+ rk808_clkout->clkout2_hw.init = &init;
+
+ /* optional override of the clockname */
+ of_property_read_string_index(node, "clock-output-names",
+ 1, &init.name);
+
+ clk_table[1] = devm_clk_register(&client->dev,
+ &rk808_clkout->clkout2_hw);
+
+ rk808_clkout->clk_data.clks = clk_table;
+ rk808_clkout->clk_data.clk_num = 2;
+ of_clk_add_provider(node, of_clk_src_onecell_get, clk_table);
+
+ return 0;
+}
+
+static struct platform_driver rk808_clkout_driver = {
+ .probe = rk808_clkout_probe,
+ .driver = {
+ .name = "rk808-clkout",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(rk808_clkout_driver);
+
+MODULE_DESCRIPTION("Clkout driver for the rk808 series PMICs");
+MODULE_AUTHOR("Chris Zhong <zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
+MODULE_AUTHOR("Zhang Qing <zhanqging-TNX95d0MmH7DzftRWevZcw@public.gmane.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:rk808-clkout");
diff --git a/include/dt-bindings/clock/rockchip,rk808.h b/include/dt-bindings/clock/rockchip,rk808.h
new file mode 100644
index 0000000..1a87343
--- /dev/null
+++ b/include/dt-bindings/clock/rockchip,rk808.h
@@ -0,0 +1,11 @@
+/*
+ * This header provides constants clk index RK808 pmic clkout
+ */
+#ifndef _CLK_ROCKCHIP_RK808
+#define _CLK_ROCKCHIP_RK808
+
+/* CLOCKOUT index */
+#define RK808_CLKOUT0 0
+#define RK808_CLKOUT1 1
+
+#endif
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next reply other threads:[~2014-08-23 11:07 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-23 11:07 Chris Zhong [this message]
[not found] ` <1408792024-17367-1-git-send-email-zyw-TNX95d0MmH7DzftRWevZcw@public.gmane.org>
2014-08-25 4:04 ` [PATCH v3 5/5] Clk: RK808: Add clkout driver for RK808 Doug Anderson
-- strict thread matches above, loose matches on Subject: below --
2014-08-21 13:37 Chris Zhong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408792024-17367-1-git-send-email-zyw@rock-chips.com \
--to=zyw-tnx95d0mmh7dzftrwevzcw@public.gmane.org \
--cc=a.zummo-BfzFCNDTiLLj+vYz1yj4TQ@public.gmane.org \
--cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=cf-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=dianders-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=dtor-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
--cc=hl-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=huangtao-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=javier.martinez-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
--cc=kever.yang-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=rtc-linux-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=sonnyrao-F7+t8E8rja9g9hUCZPvPmw@public.gmane.org \
--cc=xxx-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
--cc=zhangqing-TNX95d0MmH7DzftRWevZcw@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).