From: Guodong Xu <guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
pawel.moll-5wv7dgnIgG8@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org,
galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org,
grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
zhangnian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org
Cc: Guodong Xu <guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: [PATCH 3/3] ARM: dts: hi3620-hi4511: Add HI6421 MFD and regulator nodes
Date: Mon, 25 Aug 2014 21:39:42 +0800 [thread overview]
Message-ID: <1408973982-2072-4-git-send-email-guodong.xu@linaro.org> (raw)
In-Reply-To: <1408973982-2072-1-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Add Hi6421 MFD dts node and regulator nodes into hi3620-hi4511
board config dts file.
Signed-off-by: Guodong Xu <guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/hi3620-hi4511.dts | 233 ++++++++++++++++++++++++++++++++++++
1 file changed, 233 insertions(+)
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index fe62392..a1aadbb 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -635,6 +635,239 @@
pinctrl-single,bias-pullup = <0 1 0 1>;
};
};
+
+ hi6421 {
+ compatible = "hisilicon,hi6421-pmic";
+ reg = <0xc00000 0x0180>; /* 0x60 << 2 */
+
+ regulators {
+ // supply for MLC NAND/ eMMC
+ hi6421_vout0_reg: hi6421_vout0 {
+ regulator-name = "VOUT0";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for 26M Oscillator
+ hi6421_vout1_reg: hi6421_vout1 {
+ regulator-name = "VOUT1";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for AP system
+ hi6421_vout2_reg: hi6421_vout2 {
+ regulator-name = "VOUT2";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for DDR PHY I/O
+ hi6421_vout3_reg: hi6421_vout3 {
+ regulator-name = "VOUT3";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for MIPI, USB2.0, PCIe, PLL Analog
+ hi6421_vout4_reg: hi6421_vout4 {
+ regulator-name = "VOUT4";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for I/O 1.8V
+ hi6421_vout5_reg: hi6421_vout5 {
+ regulator-name = "VOUT5";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for I/O 2.6V
+ hi6421_vout6_reg: hi6421_vout6 {
+ regulator-name = "VOUT6";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for SD I/O
+ hi6421_vout7_reg: hi6421_vout7 {
+ regulator-name = "VOUT7";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for USB PHY
+ hi6421_vout8_reg: hi6421_vout8 {
+ regulator-name = "VOUT8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Efuse power
+ hi6421_vout9_reg: hi6421_vout9 {
+ regulator-name = "VOUT9";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for BT RF&PA
+ hi6421_vout10_reg: hi6421_vout10 {
+ regulator-name = "VOUT10";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for GPS RF&PA
+ hi6421_vout11_reg: hi6421_vout11 {
+ regulator-name = "VOUT11";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for SD card
+ hi6421_vout12_reg: hi6421_vout12 {
+ regulator-name = "VOUT12";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ };
+
+ // supply for CMMB
+ hi6421_vout13_reg: hi6421_vout13 {
+ regulator-name = "VOUT13";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for WIFI I/O
+ hi6421_vout14_reg: hi6421_vout14 {
+ regulator-name = "VOUT14";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for WIFI core & PA
+ hi6421_vout15_reg: hi6421_vout15 {
+ regulator-name = "VOUT15";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for LCD I/O
+ hi6421_vout16_reg: hi6421_vout16 {
+ regulator-name = "VOUT16";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ // supply for LCD Ananlog
+ hi6421_vout17_reg: hi6421_vout17 {
+ regulator-name = "VOUT17";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ // supply for Camera I/O
+ hi6421_vout18_reg: hi6421_vout18 {
+ regulator-name = "VOUT18";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Camera Analog
+ hi6421_vout19_reg: hi6421_vout19 {
+ regulator-name = "VOUT19";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Camera VCM
+ hi6421_vout20_reg: hi6421_vout20 {
+ regulator-name = "VOUT20";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ // supply for Audio, incl. HKADC
+ hi6421_vout_audio_reg: hi6421_vout_audio {
+ regulator-name = "AVDD2";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ // supply for Cortex-A9 CPU core
+ hi6421_buck0_reg: hi6421_buck0 {
+ regulator-name = "VBUCK0";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Cortex-A9 CPU core
+ hi6421_buck1_reg: hi6421_buck1 {
+ regulator-name = "VBUCK1";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for GPU
+ hi6421_buck2_reg: hi6421_buck2 {
+ regulator-name = "VBUCK2";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1600000>;
+ regulator-boot-on;
+ };
+
+ // supply for Peripheral
+ hi6421_buck3_reg: hi6421_buck3 {
+ regulator-name = "VBUCK3";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for LPDDR2 and AP I/O
+ hi6421_buck4_reg: hi6421_buck4 {
+ regulator-name = "VBUCK4";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <2000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ // supply for Low voltage
+ hi6421_buck5_reg: hi6421_buck5 {
+ regulator-name = "VBUCK5";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1900000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
};
gpio-keys {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
prev parent reply other threads:[~2014-08-25 13:39 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 13:39 [PATCH 0/2] Hi6421 MFD driver Guodong Xu
2014-08-25 13:39 ` [PATCH 1/3] Documentation: mfd: add docs for hi6421 dt Guodong Xu
2014-08-25 13:39 ` [PATCH 2/3] mfd: Add hi6421 PMIC core driver Guodong Xu
[not found] ` <1408973982-2072-3-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-08-27 14:11 ` Lee Jones
2014-09-01 8:17 ` Guodong Xu
[not found] ` <1408973982-2072-1-git-send-email-guodong.xu-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
2014-08-25 13:39 ` Guodong Xu [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408973982-2072-4-git-send-email-guodong.xu@linaro.org \
--to=guodong.xu-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
--cc=khilman-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=sameo-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
--cc=zhangnian-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).