Re: [PATCH v3 3/6] pinctrl: Add documentation for SPMI PMIC pinctrl driver bindings

["Ivan T. Ivanov" <iivanov@mm-sol.com>]

On Wed, 2014-08-13 at 07:32 -0700, Stephen Boyd wrote:
> On 08/11, Ivan T. Ivanov wrote:
> > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
> > new file mode 100644
> > index 0000000..0a64567
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt
> > @@ -0,0 +1,179 @@
> > +Qualcomm PMIC Multi-Purpose Pin (MPP) block
> > +
> > +This binding describes the MPP block(s) found in the 8xxx series of pmics from
> > +Qualcomm.
> > +
> > +- compatible:
> > +	Usage: required
> > +	Value type: <string>
> > +	Definition: must be one of:
> > +		    "qcom,pm8841-mpp"
> > +		    "qcom,pm8941-mpp"
> > +		    "qcom,pma8084-mpp"
> > +
> > +- reg:
> > +	Usage: required
> > +	Value type: <u32>
> > +	Definition: Register base of the gpio block
> 
> MPP?
> 
> > +
> > +- interrupts:
> > +	Usage: required
> > +	Value type: <prop-encoded-array>
> > +	Definition: Must contain an array of encoded interrupt specifiers for
> > +		    each available gpio
> 
> MPP? Maybe gpio makes sense.

Thank you Stephen. Will fix them in next version.

regards,
Ivan