From: Bjorn Andersson <bjorn.andersson@sonymobile.com>
To: Rob Herring <robh+dt@kernel.org>, Mark Brown <broonie@kernel.org>,
Lee Jones <lee.jones@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>,
Andy Gross <agross@codeaurora.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@linaro.org>,
Kumar Gala <galak@codeaurora.org>,
Josh Cartwright <joshc@codeaurora.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-arm-msm@vger.kernel.org
Subject: [PATCH v6 0/3] Qualcomm Resource Power Manager driver
Date: Mon, 25 Aug 2014 21:58:26 -0700 [thread overview]
Message-ID: <1409029109-28769-1-git-send-email-bjorn.andersson@sonymobile.com> (raw)
This series adds a regulator driver for the Resource Power Manager found in
Qualcomm 8660, 8960 and 8064 based devices.
The RPM driver exposes resources to its child devices, that can be accessed to
implement drivers for the regulators, clocks and bus frequency control that's
owned by the RPM in these devices.
Changes since v5:
- Clarified dt binding
- Converted regulator qcom,force-mode to enum instead of multi-boolean
- Remove unecessary version handshake
- Cleaned up naming of RPM resources between different RPM versions
- Updated regulator qcom,force-mode parsing
- Updated regulator qcom,power-mode-* parsing
- Cleanups in rpm driver
- Dropped dev_get_qcom_rpm helper function
Changes since v4:
- Moved RPM driver to mfd
Changes since v3:
- IPC register is acquired through syscon, as it's shared with others
Changes since v2:
- Fix copy-paste error in dt binding
- Correct incomplete move from mfd to soc
- Correct const mistake in regulator driver
Changes since v1:
- Moved rpm driver to drivers/soc
- Extracted resource table structs from rpm struct, as per Srinivas request
- Dropped mode setting support for the regulators for now. Unsure if we need
it and it requires some rework from the codeaurora solution.
- Using set_voltage_sel instead of rolling my own "snapping", as per Marks
request
- Split regulator ops in mV, uV and swtich versions as per Marks request.
- Added devicetree property to enable pull down.
Bjorn Andersson (3):
mfd: devicetree: bindings: Add Qualcomm RPM DT binding
mfd: qcom-rpm: Driver for the Qualcomm RPM
regulator: qcom-rpm: Regulator driver for the Qualcomm RPM
Documentation/devicetree/bindings/mfd/qcom,rpm.txt | 246 ++++++
drivers/mfd/Kconfig | 14 +
drivers/mfd/Makefile | 1 +
drivers/mfd/qcom_rpm.c | 580 ++++++++++++++
drivers/regulator/Kconfig | 12 +
drivers/regulator/Makefile | 1 +
drivers/regulator/qcom_rpm-regulator.c | 798 ++++++++++++++++++++
include/dt-bindings/mfd/qcom,rpm.h | 154 ++++
include/linux/mfd/qcom_rpm.h | 10 +
9 files changed, 1816 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/qcom,rpm.txt
create mode 100644 drivers/mfd/qcom_rpm.c
create mode 100644 drivers/regulator/qcom_rpm-regulator.c
create mode 100644 include/dt-bindings/mfd/qcom,rpm.h
create mode 100644 include/linux/mfd/qcom_rpm.h
--
1.7.9.5
next reply other threads:[~2014-08-26 4:58 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 4:58 Bjorn Andersson [this message]
2014-08-26 4:58 ` [PATCH v6 1/3] mfd: devicetree: bindings: Add Qualcomm RPM DT binding Bjorn Andersson
[not found] ` <1409029109-28769-2-git-send-email-bjorn.andersson-/MT0OVThwyLZJqsBc5GL+g@public.gmane.org>
2014-08-26 7:27 ` Lee Jones
2014-09-17 16:15 ` Lee Jones
2014-09-17 18:19 ` Bjorn Andersson
2014-09-17 18:36 ` Mark Brown
2014-08-26 4:58 ` [PATCH v6 2/3] mfd: qcom-rpm: Driver for the Qualcomm RPM Bjorn Andersson
2014-09-04 9:39 ` Lee Jones
2014-08-26 4:58 ` [PATCH v6 3/3] regulator: qcom-rpm: Regulator driver " Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409029109-28769-1-git-send-email-bjorn.andersson@sonymobile.com \
--to=bjorn.andersson@sonymobile.com \
--cc=agross@codeaurora.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=galak@codeaurora.org \
--cc=joshc@codeaurora.org \
--cc=khilman@linaro.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).