From mboxrd@z Thu Jan 1 00:00:00 1970 From: Weike Chen Subject: [PATCH 0/3] The Designware GPIO Supporting Date: Wed, 27 Aug 2014 10:46:25 -0700 Message-ID: <1409161588-19417-1-git-send-email-alvin.chen@intel.com> Return-path: Sender: linux-gpio-owner@vger.kernel.org To: Linus Walleij , Alexandre Courbot , Grant Likely , Rob Herring Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Boon Leong Ong , Andriy Shevchenko , Mika Westerberg , Hock Leong Kweh , Darren Hart , Alvin Chen List-Id: devicetree@vger.kernel.org Hi, These patches are for Intel Quark X1000 designware GPIO supporting. The first patch enables the Synopsys DesignWare APB GPIO driver to support the MFD device. And the Quark designware GPIO controller is registered as MFD device, because Quark exports a single PCI device with both GPIO and I2C functions. It is about reviewing the GPIO changes in gpio-dwapb, and in near future, the Quark I2C driver and the MFD driver that binds these GPIO & I2C functions will be sent subsequently. The second patch enables the gpio 'debounce' feature. And the third patch enables the power management. Weike Chen (3): GPIO: gpio-dwapb: Enable platform driver binding to MFD driver GPIO: gpio-dwapb: Support Debounce GPIO: gpio-dwapb: Suspend & Resume PM enabling drivers/gpio/Kconfig | 1 - drivers/gpio/gpio-dwapb.c | 296 +++++++++++++++++++++++++----- include/linux/platform_data/gpio-dwapb.h | 32 ++++ 3 files changed, 280 insertions(+), 49 deletions(-) create mode 100644 include/linux/platform_data/gpio-dwapb.h -- 1.7.9.5